BS EN 3155-058-2006 Aerospace series - Electrical contacts used in elements of connection - Contacts electrical coaxial size 16 male type D solder class R Product standard《航空航天系列 用.pdf

《BS EN 3155-058-2006 Aerospace series - Electrical contacts used in elements of connection - Contacts electrical coaxial size 16 male type D solder class R Product standard《航空航天系列 用.pdf》由会员分享，可在线阅读，更多相关《BS EN 3155-058-2006 Aerospace series - Electrical contacts used in elements of connection - Contacts electrical coaxial size 16 male type D solder class R Product standard《航空航天系列 用.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58connection Part 058: Contacts, electrical, coaxial, size 16, male, type D, solder, class R Product

2、standardThe European Standard EN 3155-058:2006 has the status of a British StandardICS 49.060Aerospace series Electrical contacts used in elements of BRITISH STANDARDBS EN 3155-058:2006BS EN 3155-058:2006This British Standard was published under the authority of the Standards Policy and Strategy Com

3、mittee on 31 October 2006 BSI 2006ISBN 0 580 49470 5Amendments issued since publicationAmd. No. Date CommentsThis publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer imm

4、unity from legal obligations.National forewordThis British Standard was published by BSI. It is the UK implementation of EN 3155-058:2006. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/

5、6/-/3, Aerospace Connectors.A list of organizations represented on ACE/6/-/3 can be obtained on request to its secretary.EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 3155-058July 2006ICS 49.060English VersionAerospace series - Electrical contacts used in elements ofconnection - Part 058: Contac

6、ts, electrical, coaxial, size 16,male, type D, solder, class R Product standardSrie arospatiale - Contacts lectriques utiliss dans lesorganes de connexion - Partie 058 : Contacts, lectriques,coaxiaux, taille 16, mles, type D, souder, class R -Norme de produitLuft- und Raumfahrt - Elektrische Kontakt

7、e zur Verwendungin Verbindungselementen - Teil 058: Elektrische KoaxialStiftkontakt Gre 16, Typ D, zum Lten, Klasse R -ProduktnormThis European Standard was approved by CEN on 9 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for gi

8、ving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versio

9、ns (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cypru

10、s, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT E

11、UROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3155-058:2006: E2 Contents Page Foreword3 Introduction .4 1 Scope 4 2 No

12、rmative references 4 3 Definitions 5 4 Required characteristics.5 4.1 Specific characteristics.5 4.2 Dimensions and mass.5 4.3 Marking by colour code 5 4.4 Material, surface treatment.5 4.5 Permissible cables 6 4.6 Stripping of cables and wiring method .6 4.7 Tooling 8 4.8 Tests9 4.9 Gauge. 12 5 Des

13、ignation . 13 6 Marking 13 7 Technical specification 13 EN 3155-058:20063 Foreword This European Standard (EN 3155-058:2006) has been prepared by the AeroSpace and Defense Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rule

14、s of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text

15、or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007, and. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held respo

16、nsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany

17、, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 3155-058:20064 Introduction The contacts defined by this standard are derived from those of MIL-

18、C-39029/76 and are intermateable with those of MIL-C-39029/77 and MIL-C-39029/78. 1 Scope This standard specifies the required characteristics, tests and tooling applicable to size 16, male coaxial, electrical contacts, type D, solder, class R, used in elements of connection according to EN 3155-002

19、. It shall be used together with EN 3155-001. The associated male contacts are defined in EN 3155-059 and EN 3155-069. 2 Normative references The following referenced documents are indispensable fort he application of this document. For dated references, only the edition cited applies. For undated r

20、eferences, the latest edition of the referenced document (including any amendments) applies. EN 2591 (all parts), Aerospace series Elements of electrical and optical connection Test methods EN 3155-001, Aerospace series Electrical contacts used in elements of connection Part 001: Technical specifica

21、tion 1) EN 3155-002, Aerospace series Electrical contacts used in elements of connection Part 002: List and utilization of contacts EN 3155-059, Aerospace series Electrical contacts used in elements of connection Part 059: Contacts, electrical, coaxial, size 16, female, type D, solder, class R Produ

22、ct standard EN 3155-069, Aerospace series Electrical contacts used in elements of connection. Part 069: Contacts, electrical, coaxial, female, type D, solder, class P Product standard 2) MIL-A-8243D, Anti-icing and deicing-defrosting fluids 3) MIL-C-25769J, Cleaning compound, aircraft surface, alkal

23、ine water base 3) MIL-C-39029/76, Contacts, electrical connector, pin, crimp, removable, shielded, size 16, (for MIL-C-38999 Series I, II, III, IV and MIL-C-24308 connectors) 3) MIL-C-39029/77, Contacts, electrical connector, socket, crimp, removable, shielded, size 16, (for MIL-C-38999 Series I, II

24、I, IV connectors) 3) MIL-C-39029/78, Contacts, electrical connector, socket, crimp, removable, shielded, size 16, (for MIL-C-38999 Series II, and MIL C 24308 connectors) 3) MIL-H-5606E, Hydraulic fluid, petroleum base, aircraft, missile and ordnance 3) MIL-I-81969B, Installing and removal tools, con

25、nector electrical contact, type II, class 2, composition C 3) 1) Published as ASD Prestandard at the date of publication of this standard. 2) In preparation at the date of publication of this standard. 3)Published by: Department of Defense (DOD), the Pentagon, Washington D.C. 20301 USA. EN 3155-058:

26、20065 MIL-I-81969/08B, Installing and removal tools, connector electrical contact, types I and II, class 2, composition A 3) MIL-I-81969/14C, Installing and removal tools, connector electrical contact, type III, class 2, composition B 3) MIL-L-7808J, Lubricating oil, aircraft turbine engine, synthet

27、ic base, NATO code number O-148 3) MIL-L-7870A, Lubricating oil, general purpose, low temperature 3) MIL-L-23699C, Lubricating oil, aircraft turbine engines, synthetic base 3) MS3197, Gage pin for socket contact engagement test 3) QQ-S-571F, Solder, electronic (96 to 485 C) 3) SAE AS 1241A, Fire Res

28、istant Phosphate Ester Hydraulic Fluid for Aircraft (March 83) 4) TR 6058, Aerospace series Cable code identification list 5) 3 Definitions For the purposes of this standard, the definitions given in EN 3155-001 apply. 4 Required characteristics 4.1 Specific characteristics Type D contacts are conta

29、cts with screening feature, class R corresponds to an operating temperature range from -65 C to 150 C. 4.2 Dimensions and mass See Figure 1 for dimensions. Contact mass: 0,243 g max. 4.3 Marking by colour code Not applicable 4.4 Material, surface treatment 4.4.1 Material Body: copper alloy 4.4.2 Pro

30、tective coating Gold on appropriate undercoat for copper alloy parts 3)Published by: Department of Defense (DOD), the Pentagon, Washington D.C. 20301 USA. 4)Published by: Society of Automotive Engineers, Inc. (SAE) 400, Commonwealth Drive, Warrendale, PA 15096-0001. 5)Published as AECMA Technical Re

31、port at the date of publication of this standard. EN 3155-058:20066 Thickness not specified. 4.4.3 Dielectric ETFE fluoropolymer Dimensions in millimetres. Key c Male external contact bodyg Solder ringsd Female central contact bodyh Inspection windowse Dielectrici Diameter after shrinkingf Heat shri

32、nkable tubingNOTE 1 Point at which a square ended gauge pin of the same basic diameter as the mating contact first engages the female contact spring member. Provision for a clearance hole shall be provided. NOTE 2 Mates with 0,39/0,37 male contact diameter. Figure 1 4.4.4 Heat shrinkable tubing Radi

33、ation crosslinked polyvinylidene fluoride 4.4.5 Solder rings Sn63 as per QQ-S-571 4.5 Permissible cables The cables should have dimensions within the values specified in Table 1. 4.6 Stripping of cables and wiring method Dimensions are in millimetres. See Figures 2, 3 and 4. EN 3155-058:20067 4.6.1

34、Assembly instructions Strip cable as shown on Figures 2 or 3 or 4 Insert cable into contact until it is fully seated. Heat contact with appropriate tools as shown on Figure 5 until solder melts and flows and strain relief tubing conforms to cable. Table 1 Dimensions in millimetres Cable diameter min

35、. max. Jacket A 2,62 Shield B 1,67 2,13 Dielectric C 0,91 1,72 Conductor D 0,22 0,58 Permissible cable code according to TR 6058 XE, XY, WL Figure 2 Key X Fold shield back over cable jacket Figure 3 EN 3155-058:20068 4.6.2 Preparation of coaxial cable Depending upon dielectric diameter value there a

36、re three possibilities. 4.6.2.1 Cable preparation for straight shield When all diameters conform to Table 1. 4.6.2.2 Cable preparation for fold back shield When shield diameter is smaller than B min. of Table 1. Restriction: if diameter of shield becomes B max. (2,13 mm). 4.6.2.3 Preparation for coa

37、xial cable with small dielectric diameter When dielectric diameter is C min. Table 1 (0,91 mm): strip the cable as shown on Figure 4; slip a dielectric barrier between the shield braid and the cable dielectric to bring the diameter within the value specified in Table 1. Key X Dielectric barrier Figu

38、re 4 4.7 Tooling 4.7.1 Contact termination tooling The hot air generator is of a minimum usable capacity of 800 W and the temperature in the heating zone shall be (420 20) C. The drawing of the tool is given for information purposes: the positioner has an interface for the male contact on side P and

39、 the female contact on side S (see Figure 5); the function of the cable clamp is to hold the parts in place during the heating and cooling phases. EN 3155-058:20069 Key A Coaxial cable B Contact C Cable clamp D Positioning device Figure 5 4.7.2 Insertion/extraction tooling Insertion: MIL-I-81969/14-

40、03 or MIL-I-81969/08-07 Extraction: MIL-I-81969/14-03 or MIL-I-81969/08-08 4.8 Tests See Table 2. EN 3155-058:200610 Table 2 Applicable EN 2591- Test Not applicableAccording toEN 3155-001 Remarks 101 Visual examination X 102 Examination of dimensions and mass X See 4.2. 201 Contact resistance - Low

41、level X Test temperature: ambient Maximum contact resistance m Contact Initial After tests Centre 10 15 Outer Not applicable 202 Contact resistance at rated current X Maximum contact resistance m (2503+) C (15003+) C Contact InitialAfter testsAfter tests Rated current A Centre 10 15 20 1 Outer 3 5 4

42、,8 7,5 204 Discontinuity of contacts in the microsecond range X Method B Duration of discontinuity: 100 ns Test duration: throughout the duration of tests 402 and 403. 206 Measurement of insulation resistance X Method C Mated contacts At ambient 5 G At 150 C 2 G 207 Voltage proof test X Method C Pro

43、of test voltage at sea level: 500 V r.m.s. between centre contact and outer contact. Proof test voltage at altitude: 125 V r.m.s. at 1,1 kPa pressure (33 000 m). Leakage current: 2 mA EN 3155-058:200611 Table 2 (continued) Applicable EN 2591- Test Not applicableAccording to EN 3155-001 Remarks 210 E

44、lectrical overload X 211 Capacitance measurement X 212 Surface transfer impedance X 213 Shielding effectiveness from 100 MHz to 1 GHz X 301 Endurance at temperature X Method B 150 C Duration: 1 000 h 305 Rapid change of temperature X TA= (-65 2) C TB= (150 2) C 306 Mould growth X 307 Salt mist X 315

45、 Fluid resistance X See Table 3. 402 Shock X Method A, severity 300. The contacts shall be connected with a cable as per Table 1, then fitted in connectors. The connectors fitted with appropriate cable clamps shall be mated and mounted on the shock apparatus using appropriate mounting systems. Disco

46、ntinuity: 100 ns 403 Sinusoidal and random vibrations X The contacts shall be connected to a cable as per Table 1 then fitted in the connectors. The connectors fitted with appropriate cable clamps shall be mated and mounted on the vibration apparatus using appropriate mounting systems. The cables ar

47、e clamped a minimum of 200 mm from the rear of the contacts at a fixed point of the assembly. Discontinuity: 100 ns Test at (23 5) C 406 Mechanical endurance X 415 Test probe damage (female contact) X 416 Contact bending strength X 417 Tensile strength (crimped connection) X EN 3155-058:200612 Table

48、 2 (concluded) Applicable EN 2591- Test Not applicableAccording toEN 3155-001 Remarks 418 Gauge insertion and extraction forces in and out of a female contact X Minimum extraction force N Maximum insertion force N Gauge Initial After tests Initial After tests Maximum NA NA 3,36 3,92 Minimum 0,14 0,1

49、1 NA NA 501 Soft soldering X 502 Restricted entry X 503 Contact deformation after crimping X 508 Measurement of thickness of coating on contacts X The measured thickness shall be recorded 509 Adhesion of coating on contacts X 513 Magnetic permeability X 514 Solderability of contacts with self-contained solder and flux X 4.9 Gauge The gauges used for test EN 2591-418 (inner socket contact only) shall be in accordance with MS3197, except the di