ASTM D3782-2002 Standard Performance Specification for Mens and Boys Knitted Dress Suit Fabrics and Knitted Sportswear Jacket Slack and Trouser Fabrics《男人和男孩用针织大礼服织物和针织休闲夹克、家常裤和裤子织.pdf
《ASTM D3782-2002 Standard Performance Specification for Mens and Boys Knitted Dress Suit Fabrics and Knitted Sportswear Jacket Slack and Trouser Fabrics《男人和男孩用针织大礼服织物和针织休闲夹克、家常裤和裤子织.pdf》由会员分享,可在线阅读,更多相关《ASTM D3782-2002 Standard Performance Specification for Mens and Boys Knitted Dress Suit Fabrics and Knitted Sportswear Jacket Slack and Trouser Fabrics《男人和男孩用针织大礼服织物和针织休闲夹克、家常裤和裤子织.pdf(3页珍藏版)》请在麦多课文档分享上搜索。
1、Designation: D 3782 02Standard Performance Specification forMens and Boys Knitted Dress Suit Fabrics and KnittedSportswear Jacket, Slack, and Trouser Fabrics1This standard is issued under the fixed designation D 3782; the number immediately following the designation indicates the year oforiginal ado
2、ption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This performance specification covers mens and boysknitted dress suit
3、and knitted sportswear jacket, slack, andtrouser fabrics composed of any textile fiber or mixture oftextile fibers.1.2 This performance specification is not applicable toknitted fabrics used for interlinings.1.3 These requirements apply to the length and widthdirections for those properties where fa
4、bric direction is perti-nent.2. Referenced Documents2.1 ASTM Standards:2D 123 Terminology Relating to TextilesD 231 Method of Testing and Tolerances for Knit Goods3D 2594 Test Methods for Stretch Properties of KnittedFabrics Having Low PowerD 2724 Test Methods for Bonded, Fused, and LaminatedApparel
5、 FabricsD 2905 Practice for Statements on Number of Specimensfor Textiles2.2 AATCC Methods:48-1974 Colorfastness to Crocking: AATCC CrockmeterMethod15-1976 Colorfastness to Perspiration16-1974 Colorfastness to Light23-1975 Colorfastness to Burnt Gas Fumes61-1975 Colorfastness to Washing, Domestic, a
6、nd Launder-ing, Commercial: Accelerated96-1975 Dimensional Changes in Laundering of Woven andKnitted Textiles Except Wool116-1974 Colorfastness to Crocking: Rotary Vertical Crock-meter Method124-1975 Appearance of Durable Press Fabrics After Re-peated Home Launderings132-1976 Colorfastness to Drycle
7、aning135-1973 Dimensional Changes in Automatic Home Laun-derings of Durable Press Woven of Knit Fabrics172 Colorfastness to Non-Chlorine Bleach in Home Laun-dering188 Colorfastness to Sodium Hypochlorite Bleach in HomeLaunderingEvaluation Procedure 1 Gray Scale for Color ChangeEvaluation Procedure 2
8、 Gray Scale for StainingEvaluation Procedure 3 AATCC Chromatic TransferenceScaleNOTE 1Reference to test methods used in this specification gives onlythe permanent part of the designation of ASTM, AATCC, or other testmethods. The current editions of each test method cited shall prevail.3. Terminology
9、3.1 Definitions:3.1.1 dimensional change, nin pressing and finishing oftextiles, the change in dimensions of a fabric caused bypressing and finishing during garment manufacture.3.2 For definitions of other textile terms used in thisspecification, refer to the individual ASTM and AATCC testmethods an
10、d to Terminology D 123.3.3 Definitions of Terms Specific to This Standard:3.3.1 pressing and finishingThis term takes into accountall of the industrial pressing and finishing treatments used ingarment production.NOTE 2No standard method is available for reproducing on a labo-ratory level the results
11、 of industrial press or finish treatments, or both, usedin the manufacture of woven outerwear garments.54. Specification Requirements4.1 The properties of fabrics for mens and boys knitteddress suits and sportswear jackets, slacks, and trousers shallconform to the specification requirements in Table
12、 1.1This specification is under the jurisdiction of ASTM Committee D13 onTextiles and is the direct responsibility of Subcommittee D13.56 on PerformanceStandards for Textile Fabrics.Current edition May 10, 2002. Published June 2002. Originally published asD 3782 79. Last previous edition D 3782 95.2
13、For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3DiscontinuedSee 1979 Annual Book of ASTM Standards, Part 32.4
14、Available from the American Association of Textile Chemists and Colorists,P.O. Box 12215, Research Triangle Park, NC 27709.5The development of a standard method has been referred to SubcommitteeD13.59 on Fabric Test Methods, General.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700,
15、West Conshohocken, PA 19428-2959, United States.5. Significance and Use5.1 Knitted fabrics should meet all of the requirements inTable 1 to be suitable for use in the manufacture of dress suitsand sportswear jackets, slacks, and trousers for men and boys.5.2 It is recognized that for purposes of fas
16、hion or aestheticsthe ultimate consumer of articles made from these fabrics mayfind acceptable some fabrics that do not conform to all of therequirements in Table 1. For example, the fabric could be dyedin shades that do not meet the requirement in Table 1 forcolorfastness to light, yet be acceptabl
17、e to the ultimate con-sumer because the shade is fashionable. In such cases, one ormore of the requirements may be modified by mutual agree-ment between the purchaser and the seller.5.2.1 If any of the requirements in Table 1 are modified bymutual agreement between the purchaser and the seller, anyr
18、eference to the specification shall specify that “this fabricmeets ASTM Specification D 3782 except for the followingcharacteristic(s).”5.3 The uses and significance of particular properties arediscussed in the appropriate sections of the specific methods.6. Sampling6.1 Tests shall be performed on t
19、he fabric as it will reach theconsumer. Any “partially finished” or “post-finished” fabricsshould first be processed in accordance with the fabric manu-facturers instructions.6.2 Unless otherwise agreed upon, as when specified in anapplicable material specification, take the number of specimensdirec
20、ted in each of the applicable test methods.6.2.1 If there has been no prior agreement and the testmethod does not specify the number of specimens, use theprocedures in Practice D 2905 to determine the number ofspecimens, such that the user may expect at the 95 % prob-ability level that the test resu
21、lt is no more than 5 % of theaverage above or below the lot average (that is, the average thatwould be obtained by applying this method to the entire lot)when using a reliable estimate of variability of individualobservations on similar materials in the users laboratory underconditions of single-ope
22、rator precision.7. Test Methods (See Note 1)7.1 Bursting StrengthDetermine the bursting strength, inthe standard atmosphere for testing textiles, as directed inMethod D 231 using an approved type of constant-rate-of-traverse (CRT) machine equipped with a bursting attachmentor an approved type of dia
23、phragm bursting tester as agreedupon between the purchaser and the seller.NOTE 3There is no overall correlation between the results obtainedwith the CRT machine equipped with a bursting attachment and thediaphragm bursting tester. Consequently, these two bursting testers cannotbe used interchangeabl
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASTMD37822002STANDARDPERFORMANCESPECIFICATIONFORMENSANDBOYSKNITTEDDRESSSUITFABRICSANDKNITTEDSPORTSWEARJACKETSLACKANDTROUSERFABRICS
链接地址:http://www.mydoc123.com/p-515486.html