ANSI TIA EIA-455-224-2002 FOTP-224 IEC 61744 Calibration of Fibre Optic Chromatic Dispersion Test Sets.pdf

《ANSI TIA EIA-455-224-2002 FOTP-224 IEC 61744 Calibration of Fibre Optic Chromatic Dispersion Test Sets.pdf》由会员分享，可在线阅读，更多相关《ANSI TIA EIA-455-224-2002 FOTP-224 IEC 61744 Calibration of Fibre Optic Chromatic Dispersion Test Sets.pdf（58页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA/EIA STANDARD ANSI/TIA/EIA-455-224-2002 Approved: May 16, 2002 TIA/EIA-455-224 FOTP-224 IEC 61744 Calibration of Fibre Optic Chromatic Dispersion Test Sets TIA/EIA-455-224 MAY 2002 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electr

2、onic Industries Alliance NOTICE TIA/EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting a

3、nd obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIA/EIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existe

4、nce of such Standards and Publications preclude their voluntary use by those other than TIA/EIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by TIA/EIA in accordance with the American National Standards Institute (ANSI) pa

5、tent policy. By such action, TIA/EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requi

6、rements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. These Materials are subject to copyright claims of IEC, ANSI, and TIA. No part of this publication may be r

7、eproduced in any form, including an electronic retrieval system, without the prior written permission of TIA. All requests pertaining to the FOTP-224-IEC 61744: Calibration of Fibre Optic Chromatic Dispersion Test Sets Standard should be submitted to TIA. (From Standards Proposal No. 3-0033, formula

8、ted under the cognizance of the TIA FO-6.1 Subcommittee on Fiber Optic Test, Measurement, and Inspection Instrumentation.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2002 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 PRICE: Please refer to current Catalog of

9、 EIA ELECTRONIC INDUSTRIES ALLIANCE STANDARDS and ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) All rights reserved Printed in U.S.A. PLEASE! DONT VIOLATE THE LAW! This document is copyrighted by the TIA and may not be rep

10、roduced without permission. Organizations may obtain permission to reproduce a limited number of copies through entering into a license agreement. For information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 or call U.S.A. and Canada 1-800-854-7179, Internati

11、onal (303) 397-7956 NOTICE OF DISCLAIMER AND LIMITATION OF LIABILITY The document to which this Notice is affixed has been prepared by one or more Engineering Committees of the Telecommunications Industry Association (“TIA”). TIA is not the author of the document contents, but publishes and claims c

12、opyright to the document pursuant to licenses and permission granted by the authors of the contents. TIA Engineering Committees are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http:/www.tia

13、online.org/standards/sfg/engineering_manual.cfm. TIAs function is to administer the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). THE USE OR PRACTICE OF CON

14、TENTS OF THIS DOCUMENT MAY INVOLVE THE USE OF INTELLECTUAL PROPERTY RIGHTS (“IPR”), INCLUDING PENDING OR ISSUED PATENTS, OR COPYRIGHTS, OWNED BY ONE OR MORE PARTIES. TIA MAKES NO SEARCH OR INVESTIGATION FOR IPR. WHEN IPR CONSISTING OF PATENTS AND PUBLISHED PATENT APPLICATIONS ARE CLAIMED AND CALLED

15、TO TIAS ATTENTION, A STATEMENT FROM THE HOLDER THEREOF IS REQUESTED, ALL IN ACCORDANCE WITH THE MANUAL. TIA TAKES NO POSITION WITH REFERENCE TO, AND DISCLAIMS ANY OBLIGATION TO INVESTIGATE OR INQUIRE INTO, THE SCOPE OR VALIDITY OF ANY CLAIMS OF IPR. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED

16、, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIB

17、ILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HE

18、REIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHER

19、WISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 61744 IEC:2001 TIA/EIA-455-224) iCONTENTS Page 1 Scope.1 2 Normative refe

20、rences1 3 Terms and definitions2 4 Calibration 8 4.1 Rationale for calibration of CD test sets .8 4.1.1 (Full) calibration.8 4.1.2 Calibration checking.9 4.2 Preparation for calibration10 4.2.1 General advice and organization 10 4.2.2 Test environmental requirements .10 4.2.3 Measurement equipment r

21、equirements.11 4.2.4 Traceability11 4.3 Calibration procedure.11 4.4 Calibration checking procedure 12 5 Wavelength calibration procedure .12 5.1 General .12 5.2 Discrete sources12 5.3 Tunable sources 13 5.3.1 Method A .13 5.3.2 Method B .14 5.3.3 Method C.15 5.4 Uncertainties and reporting 15 6 Del

22、ay dispersion calibration procedure 15 6.1 General .15 6.2 Equipment and preparation 16 6.2.1 Pulse delay CD test sets 17 6.2.2 Phase shift CD test sets.17 6.2.3 Interferometric CD test sets .17 6.2.4 Differential phase shift CD test sets .17 6.3 Calibration procedure.18 6.4 Uncertainties and report

23、ing 19 7 Calibration checking procedure .19 7.1 General .19 7.2 Equipment and preparation 19 7.3 Procedure20 7.4 Uncertainties and reporting 20 7.5 Generation of infant reference fibre21 8 Documentation22 8.1 Specifications, measurement data and uncertainties 22 61744 IEC:2001 TIA/EIA-455-224 ii8.2

24、Traceability information23 Annex A (normative) Mathematical basis 24 A.1 Deviations .24 A.2 Uncertainties type A.24 A.3 Uncertainties type B.25 A.4 Accumulation of uncertainties 26 A.5 Reporting.28 Annex B (normative) Assessment of operational uncertainties 29 B.1 Wavelength calibration uncertaintie

25、s 29 B.1.1 Wavelength offsets 29 B.1.2 Source spectral width and shape30 B.2 Fibre length uncertainty .30 B.3 Optical delay variation30 B.3.1 Axial fibre strain.31 B.3.2 Fibre temperature 31 B.4 Instrumentation uncertainties .31 B.4.1 Pulse delay determination 31 B.4.2 Phase shift determination.32 B

26、.4.3 Differential phase shift determination .32 B.4.4 Interference fringe position determination.33 B.4.5 Electronic scale factor uncertainty33 B.4.6 Time delay and phase shift range uncertainty.33 B.4.7 Computational uncertainties .34 B.5 Effect of dispersion modelling 34 B.6 Fibre related uncertai

27、nties .34 B.6.1 Second order modes34 B.6.2 OHabsorption35 B.6.3 Total fibre loss .35 B.6.4 Optical reflections 35 B.7 System dispersion uncertainties.35 Annex C (informative) Chromatic dispersion .36 C.1 Chromatic dispersion in fibres36 C.2 Description of chromatic dispersion test sets36 C.3 Measure

28、ment techniques .37 C.3.1 Pulse delay method37 C.3.2 Phase shift method 38 C.3.3 Differential phase shift method.38 C.3.4 Interferometric method.38 C.4 Fibre chromatic dispersion specifications .38 Annex D (informative) CD test set calibration compensation .40 D.1 Calibration compensation.40 D.2 Cal

29、ibrated reference fibres.41 D.3 Calibration compensation procedure 41 61744 IEC:2001 TIA/EIA-455-224) iii61744 IEC:2001 TIA/EIA-455-224 ivINTERNATIONAL ELECTROTECHNICAL COMMISSION _ CALIBRATION OF FIBRE OPTIC CHROMATIC DISPERSION TEST SETS FOREWORD 1) The IEC (International Electrotechnical Commissi

30、on) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in ad

31、dition to other activities, the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liai

32、sing with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of the IEC on technical matter

33、s express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3) The documents produced have the form of recommendations for international use and are published in the form o

34、f standards, technical specifications, technical reports or guides and they are accepted by the National Committees in that sense. 4) In order to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in

35、their national and regional standards. Any divergence between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter. 5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared

36、 to be in conformity with one of its standards. 6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61744

37、 has been prepared by IEC technical committee 86: Fibre optics. The text of this standard is based on the following documents: FDIS Report on voting 86/170/FDIS 86/173/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above tab

38、le. This publication has been drafted in accordance with the ISO/IEC Directives, Part 3. Annexes A and B form an integral part of this standard. Annexes C and D are for information only. The committee has decided that the contents of this publication will remain unchanged until 2002. At this date, t

39、he publication will be reconfirmed; withdrawn; 61744 IEC:2001 TIA/EIA-455-224) v replaced by a revised edition, or amended. 61744 IEC:2001 TIA/EIA-455-224 viINTRODUCTION Chromatic dispersion in optical fibres Chromatic dispersion is the variation with optical light wavelength of the light propagatio

40、n delay time in a length of fibre. This variation can cause bandwidth limitation in the fibre when used to transmit communication signals. For a more detailed explanation, refer to annex C and IEC 60793-1-1. Chromatic dispersion (CD) test sets CD test sets are used to measure the chromatic dispersio

41、n properties of optical fibres and typically comprise an optical source of known wavelength(s), a fibre light input coupling and output coupling means, optical detection means, and electronic or optical means of determining the optical delay or dispersion at the source wavelength. There are several

42、variants each requiring slightly different calibration techniques. Refer to annex C for further details. In general, all CD test sets produce an output of fibre delay or dispersion versus the light wavelength, typically in graphical form. Thus, wavelength constitutes the x-axis and delay or dispersi

43、on the y-axis. Overview of calibration procedures described in this standard The requirement to calibrate the CD test set, traceable to known standards, is essential for quality control in fibre optic production, fibre research and similar activities. This standard describes the detailed procedures

44、used to establish calibration of a CD test set. Calibration of a CD test set is established by applying known artefacts or standards (themselves calibrated to reference standards) to the CD test set, measuring its response and adjusting (correcting) the CD test set to achieve results that match the

45、standards used. In this way the CD test set results will be brought to close agreement with other CD test sets also calibrated in the manner described in this standard. Primarily the artefacts or standards used are as follows: a) wavelength artefact(s) used to calibrate the light source wavelength(s

46、) used by the CD test set. This is to establish the correct excitation wavelength for the system (the x-axis) in order that the correct delay or dispersion (the y-axis) be determined subsequently; b) delay or dispersion artefact(s) used to calibrate the delay or dispersion response of the CD test se

47、t (the y-axis). Calibration can only be carried out using these artefacts. After a calibration has been completed, a calibration period is defined over which the CD test set is deemed to remain calibrated. At the end of this period, it would be necessary to establish if the CD test set calibration r

48、equires updating (changing); this can be performed using the artefact described above, or by use of a known standard fibre (reference fibre) whose chromatic dispersion is known. This is referred to as calibration checking. The fibre forms a stable source of known dispersion and may be used as a simp

49、le dispersion artefact. If it is found that the calibration has not changed within the required uncertainty limits, then it is possible to simply extend the calibration period again by a defined amount. 61744 IEC:2001 TIA/EIA-455-224) viiIf, however, it is found that the CD test set measurement results have changed significantly compared to the user requirements (i.e. the test set has drifted), then calibration using the artefacts (if not already carried out at this time) should be carried out and the calibration renewed. The above ration