ANSI INCITS ISO IEC 11319-1993 Information Technology 8 mm Wide Magnetic Tape Cartridge for Information Interchange Helical Scan Recording.pdf

《ANSI INCITS ISO IEC 11319-1993 Information Technology 8 mm Wide Magnetic Tape Cartridge for Information Interchange Helical Scan Recording.pdf》由会员分享，可在线阅读，更多相关《ANSI INCITS ISO IEC 11319-1993 Information Technology 8 mm Wide Magnetic Tape Cartridge for Information Interchange Helical Scan Recording.pdf（74页珍藏版）》请在麦多课文档分享上搜索。

1、 INCITS/ISO/IEC 11319-1993 (R2003)(formerly ANSI/ISO/IEC 11319-1993 (R1998)for Information Technology8 mm WideMagnetic Tape Cartridgefor Information InterchangeHelical Scan RecordingAmericanNationalStandardApproval of an American National Standard requires review by ANSI that therequirements for due

2、 process, consensus, and other criteria for approval havebeen met by the standards developer.Consensus is established when, in the judgment of the ANSI Board of StandardsReview, substantial agreement has been reached by directly and materiallyaffected interests. Substantial agreement means much more

3、 than a simplemajority, but not necessarily unanimity. Consensus requires that all views andobjections be considered, and that a concerted effort be made toward theirresolution.The use of American National Standards is completely voluntary; their existencedoes not in any respect preclude anyone, whe

4、ther he has approved the standardsor not, from manufacturing, marketing, purchasing, or using products, processes,or procedures not conforming to the standards.The American National Standards Institute does not develop standards and will inno circumstances give an interpretation of any American Nati

5、onal Standard.Moreover, no person shall have the right or authority to issue an interpretation ofan American National Standard in the name of the American National StandardsInstitute. Requests for interpretations should be addressed to the secretariat orsponsor whose name appears on the title page o

6、f this standard.CAUTION NOTICE: This American National Standard may be revised orwithdrawn at any time. The procedures of the American National StandardsInstitute require that action be taken periodically to reaffirm, revise, or withdrawthis standard. Purchasers of American National Standards may re

7、ceive currentinformation on all standards by calling or writing the American National StandardsInstitute.Published byAmerican National Standards Institute11 West 42nd Street, New York, New York 10036Copyright 1993 by Information Technology Industry Council (ITI)All rights reserved.These materials ar

8、e subject to copyright claims of International Standardization Organization (ISO),International Electrotechnical Commission (IEC), American National Standards Institute (ANSI), andInformation Technology Industry Council (ITI). Not for resale. No part of this publication may bereproduced in any form,

9、 including an electronic retrieval system, without the prior written permission of ITI.All requests pertaining to this standard should be submitted to ITI, 1250 Eye Street NW, Washington, DC20005.Printed in the United States of AmericaANSI/ISO/IEC 11319-l 993 American National Standard for Informati

10、on Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording Secretariat Computer and Business Equipment Manufacturers Association Approved December 27, 1993 American National Standards Institute, Inc. ISOlIEC 11319:1993(E) Contents Section 1 : General 1 sco

11、pe 2 Conformance 3 Normative references 4 Definitions 4.1 AC erase 4.2 Average Signal Amplitude 4.3 azimuth 4.4 back surface 4.5 bit cell 4.6 hyte 4.7 cartridge 4.8 Cyclic Redundancy Check (CRC) Character 4.9 Error Correcting Code (KC) 4.10 flux transition position 4.11 flux transition spacing 4.12

12、magnetic tape 4.13 Master Standard Reference Tape 4.14 Physical Beginning of Tape (PBOT) 4.15 Physical End of T;rpe (PEOT) 4.16 physical recording density 4.17 Secondary Reference Amplitude 4.18 Secondary Reference Field 4.19 Secondary Standard Reference Tape 4.20 Standard Reference (w-rent (lr) 4.2

13、1 Tape Reference Edge 4.22 Test Recording Current 4.23 tone 4.24 track 4.25 Typical Field Page 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 0 ISO/IEC 1993 All rights resewed No part of this publication may be reproduced or utilized in any form or by any means. electronic or mechanical

14、, including photocopying and microfilm, without Per- mission in writing from the publisher ISO/IEC Copyright Office l Case Postale 66 l Cl-l-121 1 Genbve 20 l Switzerland Printed in Switzerland ii ISOlIEC 11319:1993(E) 5 Environment and safety 5.1 Testing environment 5.2 Operating environment 5.3 St

15、orage environment 5.4 Transportation 5J Safety 5.6 Flammability Section 2 : Requirements for the case 6 Dimensional and mechanical characteristics of the Case 6.1 6.2 6.3 6.4 65 6.6 6.7 6.8 6.9 6.10 6.11 6.12 6.13 6.14 6.15 6.16 6.17 6.18 6.19 6.20 6.21 General Overall dimension ( figure 3 ) Holding

16、 areas Cartridge insertion Window ( figure 1 ) Loading grips ( figure 3 ) Label areas ( figure 3 ) Datum areas and datum holes ( figures 4, 5 and 6 ) Support areas Recognition holes ( figures 5. 6 and 7 ) Write-inhibit Hole ( figures 6 and 7 ) Pre-positioning surfaces ( figures 3 and 5 ) Cartridge l

17、id ( figures 3 and 8 ) Cartridge reel lock ( figure 11 ) Reel access holes ( figure 5 ) Interface between the reels and the drive spindles ( figures 17 and 18 ) Light path ( figures 5, 7, 15 and 16 ) Position of the tape in the case ( figure 16 ) Tape path zone ( figures 16 and 17 ) Tape access cavi

18、ty ( figure 5 ) Tape access cavity clearance requirements ( figure 19 ) Section 3 : Requirements for the unrecorded tape - 31 7 Mechanical, physical and dimensional characteristics of the tape 7.1 Materials 7.2 Tape length 73.1 Length of magnetic tape 73.2 Length of leader and trailer tapes 73.3 Spl

19、icing tape 31 31 31 31 31 31 7.3 Width 7.4 Discontinuities 7.5 Thickness 75.1 Thickness of magnetic tape 75.2 Thickness of leader and trailer tape 31 31 31 31 31 2 3 3 3 4 4 5 5 6 6 6 7 7 8 8 9 10 11 11 12 12 13 13 13 . . . 111 ISOlIEC 11319:1993(E) 31 32 32 32 33 7.6 Longitudinal curvature 7.7 Cupp

20、ing 7.8 Coating adhesion ( figure 20 ) 7.9 Layer-to-ktvet ;rJhesion 7.10 Tensile strength 33 33 7.10.1 Breaking strength 7.10.2 Yield strength 7.11 Residual elongation 33 7.12 Electrical resistance of the surface 33 7.13 Tape winding 34 7.14 Light transmittance of tape 34 8 Magnetic recording perfor

21、mance 34 34 35 35 35 35 8.1 Test conditions 8.2 Typical Field 8.3 Signal Amplitude 8.4 Resolution 8.5 Narrow-band signal-to-noise ratio 8.51 Requirement 35 8.5.2 Procedure 35 35 35 8.6 Ease of erasure 8.7 Tape quality 35 35 8.7.1 Missing pulses 8.7.2 Missing pulse zone 36 8.8 lnhibitor tape 36 Secti

22、on 4 : Requirements for an interchanged tape 36 9 Format 36 36 9.1 9.2 General Information matrix 37 9.2.1 Loading of the information matrix 40 10 Method of recording 40 10.1 Physical recording density 40 41 41 10.1.1 Iong-term average bit cell length 10.1.2 Short-term average bit cell length 10.1.3

23、 Rate of change 41 41 10.2 Bit shift 10.3 Read signal amplitudes iv ISO/IEC 11319:1993(E) 10.3.1 Amplitude of data signals 10.3.2 Amplitude of servo signals 10.33 Signal amplitude on an analogue tape mark track 41 41 41 10.4 Erasure 41 11 Track geometry 42 11.1 Track positions 42 11.2.1 Average trac

24、k pitch 43 11.2.2 Adjacent track pitch 43 11.3 Track width 43 11.4 Track angle 43 11.5 Linearity of track edges 43 11.6 Azimuth 43 12 Format of an information track 43 12.1 Channel bit 43 12.2 Information Segment 43 12.2.1 Bit Synchronization field 44 12.2.2 Information Segment Number 44 12.2.3 Info

25、rmation Segment field 44 12.3 Information Block 45 12.4 lntormation Zone 46 12.5 Servo Zone 46 12.6 Information Tracks 46 12.6.1 Format ID Track 47 12.6.2 Datit Track 47 12.6.3 Tape Mark Track 47 12.6.4 Splice I rack 47 48 13 Tape Mark 13.1 Description 48 13.2 l.ong Tape Ma1 k 48 13.3 Short Tape Mar

26、k 48 13.3.1 Nor mnl Short Tape Mai h 48 13.3.2 Alternative Short Tape Mark 48 14 ID Information 49 14.1 Column 00, Row 00 49 14.1.1 Block Type - Data Block 49 14.1.2 Block Type - Data Block 49 14.1.3 Block type - Format ID 49 V ISO/IEC 11319:1993(E) 14.1.4 Block type - Pad Block 14.2 Column 00, Row

27、01 14.3 Column 00, Row 02 14.4 Column 00, Row 03 14.5 Column 00, Row 04 14.6 Column 00, Rows OS,06 14.6.1 Row 05 14.6.2 Row 06 14.7 Column 00. Row 07 14.8 Column 00, Rows 08, 09, 10 14.8.1 Block type - Data Block 14.8.2 Block type - non-Data Block 14.9 Column 00. Rows II, 12, 13 15 Rewritten Informa

28、tion Blocks 16 Physical tape format 16.1 Initial Erased Area 16.2 Logical Beginning of Tape Area (LBOT Area) 16.3 Usable area of the tape 16.4 Post Data erased area Annexes A Measurement of light transmittance of tape and leaders B Measurement of bit shift C Representation of g-hit bytes hy IO-bit p

29、atterns D Recommendations for transportation E Inhibitor tape 49 49 49 49 50 50 50 50 50 50 50 50 50 51 51 51 52 52 52 53 56 59 62 63 vi Foreword (This foreword is not part of American National Standard ANSI/ISO/IEC 11319-1993. This document is identical to ISO/IEC 11319-1993, and the following four

30、 paragraphs are the original foreword as it appeared in that document.) IS0 (the International Organization for Standardization, and IEC (the Inter- national Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of IS0 or IEC partici

31、pate in the development of International Standards through tech- nical committees established by the respective organization to deal with particular fields of technical activity. IS0 and IEC technical committees col- laborate in fields of mutual interest. Other international organizations, gov- ernm

32、ental and non-governmental, in liaison with IS0 and IEC, also take part in the work. In the field of information technology, IS0 and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodi

33、es for voting. Publication as an International Standard requires approval by at least 75% of the national bodies casting a vote. International Standard ISO/IEC 11319 was prepared by the European Computer Manufacturers Association (as Standard ECMA-145) and was adopted, under a special “fast-track pr

34、ocedure”, by Joint Technical Committee ISO/IEC JTC 1, information technology, Sub-Committee 11, Nexible magnetic media for digital data interchange, in parallel with its approval by national bodies of IS0 and IEC. Annexes A, B and C form an integral part of this International Standard. Annexes D and

35、 E are for information only. Requests for interpretation, suggestions for improvement or addenda, or defect reports are welcome. They should be sent to the X3 Secretariat, Computer and Business Equipment Manufacturers Association, 1250 Eye Street, NW, Suite 200 Washington, DC 20005 This standard was

36、 processed and approved for submittal to ANSI by Accredited Standards Committee on Information Processing Systems, X3. Committee approval of the standard does not necessarily imply that all committee members voted for its approval. At the time it approved this standard, the X3 Committee had the foll

37、owing members: James D. Converse, Chair Donald C. Loughry, Vice-Chair Joanne Flanagan, Secretary Organization Represented Name of Representative American Nuclear Society . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Geraldine C. Main Sally Hartze

38、ll (Alt.) AMP, Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Edward Kelley Charles Brill (Alt.) Apple Computer, Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

39、. . . . . . . . . . . . . . . . . . . Karen Higginbottom Association of the Institute for Certification of Computer Professionals (AICCP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kenneth Zemrowski AT however. such exposure may cause permanent damage. 2 ISO/IEC 11319:1993(E) 5.

40、1 Testing environment Unless otherwise specified, tests and measurements made on the cartridge to check the requirements of this International Standard shall be carried out under the following conditions temperature: 23 “C ?r 2 OC relative Humidity: 40 % to 60 % conditioning period before testing: 2

41、4 h 5.2 Operating environment Cartridges used for data interchange shall be capable of operating under the following conditions temperature: 5 “C to 45 “C relative Humidity: 20 % to 80 % wet Bulb Temperature: 26 “C max. There shall be no deposit of moisture on or in the cartridge. Conditioning befor

42、e operating: If a cartridge has been exposed during storage and/or transportation to a condition outside the above values, before use the cartridge shall be conditioned in the operating environment for a time at least equal to the period during which it has been out of the operating environment, up

43、to a maximum of 24 h. NOTE 3 Rapid variations of temperature should lx avoided 5.3 Storage environment For long-term or archival storage of cartridges the following conditions shall be observed temperature: 5 “C to 32 “C relative Humidity: 20 % to 60 % wet Bulb Temperature: 26 “C max. The stray magn

44、etic field at any point on the tape shall not exceed 4 000 A/m. There shall be no deposit of moisture on or in the cartridge. 5.1 Transportation Recommended limits for the environment to which a cartridge may be subjected during transportation, and the precautions to be taken to minimize the possibi

45、lity of damage, are provided in annex D. 5.5 Safety The cartridge and its components shall satisfy the requirements of IEC 950. 5.6 Flammability The cartridge and its components shall be made from materials which, if ignited from a match flame, do not continue to burn in a still carbon dioxide atmos

46、phere. Section 2 : Requirements for the case 6 Dimensional and mechanical characteristics of the case 6.1 General The case of the cartridge shall consist of - an upper half, - a lower half, - a lid pivotally mounted on the upper half. 3 ISO/IEC 11319:1993(E) In the drawings, an embodiment of the car

47、tridge is shown as an example. Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 Figure 10 Figure 11 Figure 12 Figure 13 Figure 14 Figure 15 Figure 16 Figure 17 Figure 18 Figure 19 is a perspective view of the cartridge seen from the top. is a perspective view of the c

48、artridge seen from the bottom. shows the top side with the lid closed using third angle projection. shows the bottom side, datum and support areas. shows the bottom side with the lid removed. shows the enlarged view of the datum and recognition holes. shows the cross-sections through the light path

49、holes, the recognition holes and the write- inhibit hole, shows details of the lid when closed, rotating and open. shows the details of the lid release insertion channel. shows the lid lock release requirements. shows the reel lock release requirements. shows the reel unlock force direction. shows the lid release force direction. shows the lid opening force direction. shows the light path and light window. shows the internal tape path and light path. shows the cartridge reel and a cross-section view of the cartridge reel. shows the cross-section view of the cartridge reel interface with th