ANSI American Society of Safety Engineers A10.25-2017 Construction and Demolition Operations Sanitation in Construction.pdf

《ANSI American Society of Safety Engineers A10.25-2017 Construction and Demolition Operations Sanitation in Construction.pdf》由会员分享，可在线阅读，更多相关《ANSI American Society of Safety Engineers A10.25-2017 Construction and Demolition Operations Sanitation in Construction.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、AmericAn nAtionAl StAndArdANSI/ASSE A10.25 2017Sanitation in ConstructionAmerican National Standard for Construction and Demolition OperationsAmericAn Society of SAfety engineerS4Casselogo-1200dpi_vector-1c-outline.pdf 1 1/20/2012 1:31:55 PMANSI/ASSE A10.25 2017ANSI/ASSE A10.25 2017This is an ASSE-p

2、roduced standard. It is copyright protected and may not be reproduced or distributed to any other party.The information and materials contained in this publication have been developed from sources believed to be reliable. However, the American Society of Safety Engineers (ASSE) as secretariat of the

3、 ANSI accredited A10 Committee or individual committee members accept no legal responsibility for the correctness or completeness of this material or its application to specific factual situations. By publication of this standard, ASSE or the A10 Committee does not ensure that adherence to these rec

4、ommendations will protect the safety or health of any persons, or preserve property. This is an ASSE-produced standard. It is copyright protected and may not be reproduced or distributed to any other party.ANSI ANSI/ASSE A10.25 2017 American National Standard Construction and Demolition Operations S

5、anitation in Construction Secretariat American Society of Safety Engineers 520 N. Northwest Highway Park Ridge, Illinois 60068 Approved: May 16, 2017 American National Standards Institute, Inc. This is an ASSE-produced standard. It is copyright protected and may not be reproduced or distributed to a

6、ny other party.Approval of an American National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, sub

7、stantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution.

8、 The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he/she has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The Amer

9、ican National Standards Institute does not develop standards and will in no circumstance give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National St

10、andards Institute. Requests for interpretation should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute

11、 require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published July, 2017 by: American Society of Safety E

12、ngineers 520 N. Northwest Highway Park Ridge, Illinois 60068 (847) 699-2929 www.asse.org Copyright 2017 by the American Society of Safety Engineers All Rights Reserved No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written

13、 permission of the publisher. Printed in the United States of America American National Standard This is an ASSE-produced standard. It is copyright protected and may not be reproduced or distributed to any other party.Foreword (This Foreword is not a part of American National Standard A10.25-2017.)

14、This standard is one of a series of safety standards that have been formulated by the Accredited Standards Committee on Safety in Construction and Demolition Operations, A10. It is expected that the standards in the A10 series will find a major application in industry, serving as a guide to contract

15、ors, labor and equipment manufacturers. For the convenience of users, a list of existing and proposed standards in the A10 series for Safety Requirements in Construction and Demolition Operations follows. A10.1 Pre-Project & Pre-Task Safety & Health Planning A10.2 Safety, Health and Environmental Tr

16、aining (under development) A10.3 Powder-Actuated Fastening Systems A10.4 Personnel Hoists and Employee Elevators A10.5 Material Hoists A10.6 Demolition Operations A10.7 Transportation, Storage, Handling and Use of Commercial Explosives and Blasting Agents A10.8 Scaffolding A10.9 Concrete and Masonry

17、 Construction A10.10 Temporary and Portable Space Heating Devices A10.11 Personnel Nets A10.12 Excavation A10.13 Steel Erection A10.15 Dredging A10.16 Tunnels, Shafts and Caissons A10.17 Safe Operating Practices for Hot Mix Asphalt (HMA) Construction A10.18 Temporary Roof and Floor Holes, Wall Openi

18、ngs, Stairways and Other Unprotected Edges A10.19 Pile Installation and Extraction Operations A10.20 Ceramic Tile, Terrazzo, and Marble Work A10.21 Safe Construction and Demolition of Wind Generation/Turbine Facilities (under development) A10.22 Rope-Guided and Non-Guided Workers Hoists A10.23 Safet

19、y Requirements for the Installation of Drilled Shafts A10.24 Roofing Safety Requirements for Low-Sloped Roofs A10.25 Sanitation in Construction A10.26 Emergency Procedures for Construction Sites A10.27 Hot Mix Asphalt Facilities A10.28 Work Platforms Suspended from Cranes or Derricks A10.29 Aerial P

20、latforms in Construction (under development) A10.31 Digger-Derricks A10.32 Personal Fall Protection Used in Construction and Demolition Operations A10.33 Safety and Health Program Requirements for Multi-Employer Projects A10.34 Public Protection A10.37 Debris Nets A10.38 Basic Elements of a Program

21、to Provide a Safe and Healthful Work Environment A10.39 Construction Safety and Health Audit Program A10.40 Reduction of Musculoskeletal Problems in Construction A10.42 Rigging Qualifications and Responsibilities in the Construction Industry A10.43 Confined Spaces in Construction and Demolition Oper

22、ations A10.44 Lockout/Tagout in Construction A10.46 Hearing Loss Prevention A10.47 Highway Construction Safety A10.48 Communication Structures A10.49 Control of Health Hazards This is an ASSE-produced standard. It is copyright protected and may not be reproduced or distributed to any other party.One

23、 purpose of these standards is to serve as guides to governmental authorities having jurisdiction over subjects within the scope of the A10 Committee standards. If these standards are adopted for governmental use, the reference of other national codes or standards in individual volumes may be change

24、d to refer to the corresponding regulations. Revisions: The A10 Committee welcomes proposals for revisions to this standard. Revisions are made to the standard periodically (usually five years from the date of the standard) to incorporate changes that appear necessary or desirable, as demonstrated b

25、y experience gained from the application of the standard. Proposals should be as specific as possible, citing the relevant section number(s), the proposed wording and the reason for the proposal. Pertinent documentation would enable the A10 Committee to process the changes in a more-timely manner. I

26、nterpretations: Upon a request in writing to the Secretariat, the A10 Committee will render an interpretation of any requirement of the standard. The request for interpretation should be clear, citing the relevant section number(s) and phrased as a request for a clarification of a specific requireme

27、nt. Oral interpretations are not provided. No one but the A10 Committee (through the A10 Secretariat) is authorized to provide any interpretation of this standard. Approval: Neither the A10 Committee nor American National Standards Institute (ANSI) approves, certifies, rates or endorses any item, co

28、nstruction, proprietary device or activity. Appendices: Appendices are included in most standards to provide the user with additional information related to the subject of the standard. Appendices are not part of the approved standard. Checklists: Checklists included in A10 standards may be copied a

29、nd used in non-commercial settings only. Committee Meetings: The A10 Committee meets twice per year. Persons wishing to attend a meeting should contact the Secretariat for information. Standard Approval: This standard was processed and approved for submittal to ANSI by the American National Standard

30、s Committee on Safety in Construction and Demolition Operations, A10. Approval of the standard does not necessarily imply (nor is it required) that all Committee members voted for its approval. At the time ANSI approved this standard, the A10 Committee had the following members: This is an ASSE-prod

31、uced standard. It is copyright protected and may not be reproduced or distributed to any other party.Richard King, CSP, Chair Steven Rank, Vice Chair Timothy R. Fisher, CSP, CHMM, ARM, CPEA, Secretary Lauren Bauerschmidt, MS Engr, CSP, Assistant Secretary Jennie Dalesandro, Administrative Technical

32、Support Organization Represented Name of Representative 3M Corporation Raymond A. Mann Judd Perner Accident Prevention Corporation Frank Burg, CSP, P.E. Terry Krug, CSP, CIH AGC of America Michael McCaffrey Kevin Cannon American Insurance Services Group Thad Nosal James G. Borchardt, CSP, CPE, CPSM,

33、 CRIS American Society of Civil Engineers William R. Nash, P.E. Harlan Fair, P.E. American Society of Safety Engineers Ken Shorter, CSP, ARM, TCDS A. David Brayton, CSP, CPC American Wind Energy Association Christopher Daniels Michele Myers Mihelic American Work Platform Training, Inc. Dennis W. Eck

34、stine APT Research, Inc. Saralyn Dwyer Associated Builders and Contractors, Inc. Greg Sizemore Lauren Williams A-Z Safety Resources, Inc. Jane F. Williams, CPEA, CCA Barton-Malow Company Jeffrey Oliver, CSP, CHST Mark Haggenmaker Black & Veatch Richard F. King, CSP John H. Johnson, CSP Building & Co

35、nstruction Trades Department Chris Trahan Cain, CIH Gary Gustafson Century Elevators Paula Manning Eric Schmidt, P.E. Clark Construction Group Kurt Dunmire, CSP, CHST Cole-Preferred Safety Consulting, Inc. Barry Cole Construction & Realty Safety Group, Inc. Ron Lattanzio Frank Marino CPWR - Center f

36、or Construction Research & Training Bruce Lippy, Ph.D., CIH, CSP Babak Memarian Edison Electric Institute Jonathan Kerns Adam Frederick Elevator Industry Work Preservation Fund Michael D. Morand James Demmel Ellis Fall Safety Solutions, LLC J. Nigel Ellis, Ph.D., P.E., CSP, CPE John T. Whitty, P.E.

37、Engineering Systems, Inc. David Ahearn, P.E. Edward J. Tuczak, P.E. Fluor Corporation Michael Weatherred, CSP James Bates, CSP Gilbane Building Co. Charles Praul, Jr., CSP Robert Hinderliter This is an ASSE-produced standard. It is copyright protected and may not be reproduced or distributed to any

38、other party.Richard D. Hislop Richard Hislop Shawn Bradfield Independent Electrical Contractors, Inc. Paul Dolenc Jerry Rivera Innovative Safety, LLC Daniel M. Paine Barbara Paine Institute of Makers of Explosives Susan JP Flanagan Ronald Thomas International Association of Bridge, Structural, Ornam

39、ental and Reinforcing Iron Workers Steven Rank International Association of Heat & Frost Insulators & Allied Workers Tim Keane International Brotherhood of Boilermakers Mark Garrett Bridget Connors International Brotherhood of Electrical Workers David Mullen Dan Gardner International Brotherhood of

40、Teamsters LaMont Byrd, CIH Asher Tobin International Safety Equipment Association Cristine Fargo International Union of Bricklayers & Allied Craftworkers Michael Kassman, CHST Gerard Scarano International Union of Operating Engineers Christopher Treml Barbara McCabe Jack L. Mickle & Associates Steve

41、 Stock, P.E., PLS Kiewit Power Constructors Co. Rusty Brown, CSP Ecudemio Gutierrez Laborers International Union of North America Walter A. Jones, MS, CIH Travis Parsons Lamar Advertising Chuck Wigger, CSP Beth Phelps Lendlease Corporation Joel Pickering, CET, CHMM Michael Lentz Liberty Mutual Insur

42、ance Daniel P. Lavoie, CSP, ARM Stan Williams, ARM, CHST Marsh LLC Timothy Bergeron, CSP Maryland Occupational Safety & Health Mischelle Vanreusel Michael Daughaday Mechanical Contractors Association of America Peter Chaney, MS, CSP Dennis Langley Miller & Long Concrete Construction Frank Trujillo A

43、lex Rodas, CHST National Association of Home Builders Robert Matuga Chelsea Vetick National Association of Railroad Safety Consultants & Investigators Lewis Barbe, P.E., CSP, CRSP National Electrical Contractors Association Michael J. Johnston Wesley Wheeler National Institute for Occupational Safet

44、y & Health Thomas G. Bobick, Ph.D., P.E., CSP, CPE G. Scott Earnest, Ph.D., P.E, CSP National Railroad Construction & Maintenance Association Jeffrey D. Meddin, CSP, CHEP, CHCM National Roofing Contractors Association Harry Dietz Tom Shanahan National Society of Professional Engineers E. Ross Curtis

45、, P.E., DFE Paul Swanson, P.E. NESTI, Inc. Michael Hayslip, P.E., CSP This is an ASSE-produced standard. It is copyright protected and may not be reproduced or distributed to any other party.Operative Plasterers and Cement Masons International Association Deven Johnson PATMI James A. Borchers Craig

46、Pratt Phoenix Fabricators and Erectors, Inc. Luke Humphrey Frank Massey Power Consultants, Incorporated David Goldsmith Camille Villanova Professional Safety Consultants, Inc. Jim E. Lapping, MS, P.E., CSP Anthony Brown Safety Environmental Engineering, Inc. Matthew Murphy Scaffolding, Shoring & For

47、ming Institute Granville Loar DeAnna Martin Shafer Safety Solutions, LLC Carmen Shafer, CSP, CHST, CRIS Sheet Metal & Air Conditioning Contractors National Association Mike McCullion, CSP, ARM SMART Union Randall Krocka Charles Austin, MS SPA Incorporated Stanley Pulz, CSP, P.E. TAUC Wayne Creasap,

48、II Kathleen Dobson, CSP, CHST, STS.C Turner Construction Company Cindy L. DePrater, ALCM Abdon Friend, CSP U.S. Army Corps of Engineers Andrew Blaisdell, MS, EI U.S. Department of Energy Bill R. McArthur, Ph.D., CIH Terry Meisinger United Association Cheryl Ambrose, CHST, OHST Rich Benkowski United

49、Brotherhood of Carpenters and William Irwin Joiners of America Dale Shoemaker United Union of Roofers, Waterproofers & Allied Workers Keith J. Vitkovich West Virginia University Extension Service Brandon Takacs, CSHM Mark Fullen, Ed.D., CSP ZBD Constructors, Inc. Greg Thompson, CSP Jeffrey D. Meddin, CSP, CHEP, CHCM Independent Experts & Observers: Alliance of Hazardous Materials Professionals Carl Heinlein, CSP, ARM, CRIS National Association of Tower Erectors John P. Jones Kathryn Stieler Warfel Construction Company Jeffrey I. Pierce Kevin Stoltzfus Subgroup A10.25 had