ANSI AD26322-1-2016 Tractors for agriculture and forestry - Safety - Part 1 Standard tractors.pdf
《ANSI AD26322-1-2016 Tractors for agriculture and forestry - Safety - Part 1 Standard tractors.pdf》由会员分享,可在线阅读,更多相关《ANSI AD26322-1-2016 Tractors for agriculture and forestry - Safety - Part 1 Standard tractors.pdf(14页珍藏版)》请在麦多课文档分享上搜索。
1、 ANSI/ASABE AD26322-1:2008 NOV2016ED Tractors for agriculture and forestry Safety Part 1: Standard tractors American Society of Agricultural and Biological Engineers ASABE is a professional and technical organization, of members worldwide, who are dedicated to advancement of engineering applicable t
2、o agricultural, food, and biological systems. ASABE Standards are consensus documents developed and adopted by the American Society of Agricultural and Biological Engineers to meet standardization needs within the scope of the Society; principally agricultural field equipment, farmstead equipment, s
3、tructures, soil and water resource management, turf and landscape equipment, forest engineering, food and process engineering, electric power applications, plant and animal environment, and waste management. NOTE: ASABE Standards, Engineering Practices, and Data are informational and advisory only.
4、Their use by anyone engaged in industry or trade is entirely voluntary. The ASABE assumes no responsibility for results attributable to the application of ASABE Standards, Engineering Practices, and Data. Conformity does not ensure compliance with applicable ordinances, laws and regulations. Prospec
5、tive users are responsible for protecting themselves against liability for infringement of patents. ASABE Standards, Engineering Practices, and Data initially approved prior to the society name change in July of 2005 are designated as “ASAE“, regardless of the revision approval date. Newly developed
6、 Standards, Engineering Practices and Data approved after July of 2005 are designated as “ASABE“. Standards designated as “ANSI“ are American National Standards as are all ISO adoptions published by ASABE. Adoption as an American National Standard requires verification by ANSI that the requirements
7、for due process, consensus, and other criteria for approval have been met by ASABE. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a
8、 simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. CAUTION NOTICE: ASABE and ANSI standards may be revised or withdrawn at any time. Additionally, procedures of ASABE require th
9、at action be taken periodically to reaffirm, revise, or withdraw each standard. Copyright American Society of Agricultural and Biological Engineers. All rights reserved. ASABE, 2950 Niles Road, St. Joseph, Ml 49085-9659, USA, phone 269-429-0300, fax 269-429-3852, hqasabe.org S T A N D A R D ANSI/ASA
10、BE AD26322-1:2008 NOV2016ED Copyright American Society of Agricultural and Biological Engineers 1 ANSI/ASABE AD26322-1:2008 NOV2016ED Revision approved November 2016; Editorially revised February 2017 as an American National Standard Tractors for agriculture and forestry Safety Part 1: Standard trac
11、tors These materials are subject to copyright claims of ISO and ASABE. No part of this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permission of ASABE. All requests pertaining to the ANSI/ASABE AD26322-1:2008 NOV2016ED standard shoul
12、d be submitted to ASABE. This standard was reviewed for adoption by the ASABE Power and Machinery Agricultural Machinery Agricultural Tractor Technical subcommittee, and has been formerly approved by the Power and Machinery Division. Adopted by ASABE and approved as an American National Standard Jun
13、e 2012; revised November 2016; editorial revision February 2017. Keywords: Clearance, Controls, Guarding, Hazard, Ladders, Noise, Operators manual, Operators workplace, Safety, Seat, Steps, Tractors 0 Foreword 0.1 ANSI/ASABE AD26322-1:2008 NOV2016, Tractors for agricultural and forestry Safety Part
14、1: Standard tractors, is an adoption with deviations of the identically titled ISO standard ISO 26322-1:2008, Tractors for agricultural and forestry Safety Part 1: Standard tractors. Deviations noted in the following Foreword sections pertain to those provisions where harmonization could not be achi
15、eved between ASABE and the International Standard. Deviations from the subsequently printed international standard are noted with underscore (addition) or strikethrough (deletions) text. Deviations from the international standard figures and equations are clearly marked. 0.2 ANSI/ASABE AD26322-1:200
16、8 NOV2016 specifies general safety requirements and their verification for the design and construction of standard tractors used in agriculture and forestry. These tractors have at least two axles for pneumatic-tyred wheels, with the smallest track gauge of the rear axle exceeding 1 150 mm, or track
17、s instead of wheels, with their unballasted tractor mass being greater than 600 kg. NOTE: Tractors having an unballasted mass not greater than 600 kg and a smallest adjustable track gauge of the axle bearing the larger tyres of 1 150 mm are dealt with in ANSI/ASABE AD26322-2:2010. In addition, ANSI/
18、ASABE AD26322-1:2008 NOV2016 specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer, as well as technical means for improving the degree of personal safety of the operator and others involved in a tractors normal operation, maintenan
19、ce and use. It is not applicable to vibration or braking. 0.3 Twenty Normative references are listed in ISO 26322-1:2008. The responsible ASABE committee has reviewed these references and approved the following deviations: 0.3.1 Replace ISO 500-1, Agricultural tractors Rear-mounted power take-off ty
20、pes 1, 2 and 3 Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone with ANSI/ASABE AD500-1:2014, Agricultural tractors Rear-mounted power take-off types 1, 2, 3 and 4 Part 1: General specifications, safety requirements, dimensions for master shield an
21、d clearance zone. Any reference to ISO 500-1 in the printed portion of ISO 26322-1 shall be replaced by ANSI/ASABE AD500-1:2014. ANSI/ASABE AD26322-1:2008 NOV2016ED Copyright American Society of Agricultural and Biological Engineers 2 0.3.2 Replace ISO 3600, Tractors, machinery for agriculture and f
22、orestry, powered lawn and garden equipment Operators manuals Content and presentation, with ANSI/ASABE AD3600:2016, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Operators manuals Content and presentation. Any reference to ISO 3600 in the printed portion of ISO
23、26322-1 shall be replaced with ANSI/ASABE AD3600:2016. 0.3.3 Replace ISO 8759-1, Agricultural wheeled tractors Front-mounted equipment Part 1: Power take-off and three-point linkage, with ANSI/ASABE AD8759-1:1998, Agricultural wheeled tractors Front-mounted equipment Part 1: Power take-off and three
24、-point linkage. Any reference to ISO 8759-1 in the printed portion of ISO 26322-1 shall be replaced with ANSI/ASABE AD8759-1:1998. 0.3.4 Replace ISO 11684, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Safety signs and hazard pictorials General principles, with
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ANSIAD2632212016TRACTORSFORAGRICULTUREANDFORESTRYSAFETYPART1STANDARDTRACTORSPDF

链接地址:http://www.mydoc123.com/p-430482.html