IEC TR 62834-2013 IEC nanoelectronics standardization roadmap《IEC纳米电子学标准化路线图》.pdf

《IEC TR 62834-2013 IEC nanoelectronics standardization roadmap《IEC纳米电子学标准化路线图》.pdf》由会员分享，可在线阅读，更多相关《IEC TR 62834-2013 IEC nanoelectronics standardization roadmap《IEC纳米电子学标准化路线图》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC/TR 62834 Edition 1.0 2013-09 TECHNICAL REPORT IEC nanoelectronics standardization roadmap IEC/TR 62834:2013(E) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reprod

2、uced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtain

3、ing additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The Inte

4、rnational Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Pleas

5、e make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also

6、 gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia

7、.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - we

8、bstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC/TR 62834 Edition 1.0 2013-09 TECHNICAL REPORT IEC nanoelectronics standardization roadmap INTERNATIONAL ELECTROTECHNICAL COMMISSION V ICS

9、07.030 PRICE CODE ISBN 978-2-8322-1100-7 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 TR 62834 IEC:2013(E) CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Background . 8

10、2.1 General 8 2.2 Classification of nanotechnology 9 General 9 2.2.1Nanomaterials 9 2.2.2Nanoscale devices 9 2.2.3Nano-biotechnology 9 2.2.4Nanofabrication process Equipment Measurement 9 2.2.5 3 Current status and prospects . 9 3.1 Related markets . 9 3.2 Technology development directions for nanom

11、aterials . 10 General 10 3.2.1World leading group status . 11 3.2.2Nanopore materials 12 3.2.3Nanocomposite materials 12 3.2.4 3.3 Overall technology status and prospects of nanoelectronic devices 12 4 Nanomaterials technology, scenario and standardization roadmap 13 4.1 Technology 13 Classification

12、 of nanomaterials . 13 4.1.1Standardization items of zero dimensional nanomaterials . 14 4.1.2Standardization items of one-dimensional nanomaterials 15 4.1.3Standardization items of two-dimensional nanomaterials 16 4.1.4Standardization items of three-dimensional nanomaterial . 17 4.1.5 4.2 Scenarios

13、. 18 Scenario for nanoparticles (or nanopowders) 18 4.2.1Scenario for quantum dots 18 4.2.2Scenario for carbon nanotubes . 19 4.2.3Scenario for nanowires . 20 4.2.4Scenario for nanostructured thin films . 20 4.2.5Scenario for sheet resistance characterization of CNT films 21 4.2.6Scenario for wear r

14、esistance and exposure test of CNT films 21 4.2.7Scenario for thermal characterization of CNT films . 22 4.2.8Scenario for graphene 22 4.2.9Scenario for nanopores. 23 4.2.10Scenario for nanocomposite materials 23 4.2.11 4.3 Roadmap of standardization of nanomaterials (2009-2020) 24 5 Nanoelectronic

15、devices technology, scenario and standardization roadmap . 24 5.1 Technology 24 Nanoscale non-volatile memory devices . 24 5.1.1New nanomaterial or new nanostructure for nanoelectronic 5.1.2 devices . 24 Three-dimensional nanoscale transistors 24 5.1.3Single electron transistors 25 5.1.4Nanoscale lo

16、gic devices . 25 5.1.5TR 62834 IEC:2013(E) 3 Carbon interconnects 25 5.1.6Nanoscale magnetic devices. 25 5.1.7Molecular devices . 25 5.1.8 5.2 Scenario 25 Scenario for nanoscale non-volatile memory devices 25 5.2.1Scenario for nanostructure electronic materials 26 5.2.2Scenario for nanoscale interco

17、nnects (CNT) . 26 5.2.3Scenario for one-dimensional nanoscale transistors . 27 5.2.4Scenario for three-dimensional nanoscale transistors . 27 5.2.5Scenario for single electron transistors . 28 5.2.6Scenario for key control characteristics of nanoscale logic 5.2.7 devices . 28 Scenario for molecular

18、devices . 28 5.2.8 5.3 Standardization roadmap of nanoelectronic devices (2009-2020) . 28 Bibliography 32 Figure 1 Roadmap format 6 Figure 2 Technologies and related products . 8 Figure 3 Interaction of product, technology and standardization roadmaps . 9 Figure 4 ISO 229 WG3 roadmap for standardiza

19、tion of nanomaterials: www.nanosafe.org 11 Figure 5 Estimated resistance of 50 nm-diameter vias dependent on the filling rate of CNTs in a via hole for 1 nm-diameter SWNT, 3 nm-diameter 3-walled MWNT, and 5 nm-diameter 6-walled MWNT . 27 Figure 6 Roadmap for standardization of nanomaterials (2009-20

20、20) . 30 Figure 7 Roadmap for standardization of nanoelectronic devices (2009-2020) . 31 Table 1 Categories and detail potential products 7 Table 2 Classification of nanomaterials 14 Table 3 Characteristics to be considered in developing standards for nanoparticles . 14 Table 4 Characteristics to be

21、 considered in developing standards for quantum dot . 15 Table 5 Characteristics to be considered in developing standards for CNT . 15 Table 6 Characteristics to be considered in developing standards for nanowires . 16 Table 7 Characteristics to be considered in developing standards for nanostructur

22、ed thin film . 16 Table 8 Characteristics to be considered in developing standards for nanostructured thin films . 17 Table 9 Characteristics to be considered in developing standards for nanopores . 17 Table 10 Characteristics to be considered in developing standards for nanocomposite materials 18 T

23、able 11 Matrix for graphene characterization . 23 4 TR 62834 IEC:2013(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ IEC NANOELECTRONICS STANDARDIZATION ROADMAP FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national ele

24、ctrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specif

25、ications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Internati

26、onal, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal

27、 decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for

28、international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4)

29、In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall

30、be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certific

31、ation bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury

32、, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cit

33、ed in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifyi

34、ng any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. However, a technical committee may propose the publication of a technical report when it has collected data of a different kind from that which is normally published as an International

35、 Standard, for example “state of the art“. IEC 62834, which is a technical report, has been prepared by IEC technical committee 113: Nanotechnology standardization for electrical and electronic products and systems. The text of this technical report is based on the following documents: Enquiry draft

36、 Report on voting 113/161/DTR 113/197/RVC Full information on the voting for the approval of this technical report can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that th

37、e contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be TR 62834 IEC:2013(E) 5 reconfirmed, withdrawn, replaced by a revised editio

38、n, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore prin

39、t this document using a colour printer. 6 TR 62834 IEC:2013(E) INTRODUCTION In IEC TC113 a survey on nano-electrotechnical standardization needs was initiated by the National Institute of Standards and Technology (NIST) in the USA to establish a strategy of standardization priorities regarding the n

40、anoelectronics area. A TC 113 Project Team was then organized to build a “Nanoelectronics standards roadmap”. This document covers nanoscale devices and nanomaterials which will be in the market or are already commercialized for nanoelectronic applications. When selecting the devices and materials t

41、o be included in the roadmap, the Project Team considered their market size and the period of time needed for their technology development. Because most of the experts in TC 113 are from an electronics background, the first version (Part A) of this roadmap covers electronics and ICT (information and

42、 communication technology) rather than energy or convergence technologies. Regarding nanomaterials, roadmaps for carbon nanotubes (CNT), graphene, nanofibres, nanoparticles and quantum dots were established. For each material there are several detailed items that need to be standardized, including p

43、hysical properties and characterization methods. Some of such standards are already under development in TC 113, such as IEC 62565-2-1 and IEC 62569. In the nanoelectronics device roadmap, nanoscale contacts, CNT interconnects, three-dimensional nanotransistors, nanoscale memory devices, and molecul

44、ar devices were selected. Though the priority was on memory devices and new types of transistors, molecular devices were included in this version considering the impact of this technology. The time span of the roadmap is important in order to cover the technology which may be realized in a certain p

45、eriod of time. However, with regard to nanoelectronics development, little information on the average technology development period is available at this stage. Thus TC 113 set the span of the roadmap up until the year 2020 to show the starting point of standardization tasks and the end of activity.

46、As the format should give insights and detailed information to the user of the roadmap, the Gantt chart format was used, including photos (see Figure 1). When a new version of the roadmap is prepared, TC 113 will develop a new format in parallel, which can give more accurate information to users. Fi

47、gure 1 Roadmap format IEC 2281/13 TR 62834 IEC:2013(E) 7 IEC NANOELECTRONICS STANDARDIZATION ROADMAP 1 Scope This Technical Report covers nanomaterials and nanoscale devices. To achieve consensus more quickly when building the roadmap, an ICT “More Moore” area has been adopted for the priority stand

48、ardization items of this first version, as shown in Table 1. Table 1 Categories and detail potential products Categories Detail potential products Version 1 Nanomaterials Zero-dimensional nanomaterial Nanoparticles/Nanopowders Quantum dot One-dimensional nanomaterial Carbon nanotube Nanowire ( - , -

49、 , ZnO) Two-dimensional nanomaterial Nanofunctional thin film Nanostructural film Graphene Three-dimensional nanomaterial Nanopore materials Nanocomposites Nanoscale devices Nanoelectronic devices Nanoscale non-volatile memory devices 1- and 3-dimensional nanoscale transistors Single electron transistor Nanoscale logic devices Nanoscale interconnection Post-CMOS signal processing Nanoscale optical devices Silicon optical devices Photonic crystal optical devi