IEC TR 62795-2013 Interoperation guide for field device tool (FDT) device type manager (DTM) and electronic device description language (EDDL)《现场设备工具(FDT) 设备类型管理器(DTM)和电子设备描述语言(EDDL)交互性指南》.pdf

《IEC TR 62795-2013 Interoperation guide for field device tool (FDT) device type manager (DTM) and electronic device description language (EDDL)《现场设备工具(FDT) 设备类型管理器(DTM)和电子设备描述语言(EDDL)交互性指南》.pdf》由会员分享，可在线阅读，更多相关《IEC TR 62795-2013 Interoperation guide for field device tool (FDT) device type manager (DTM) and electronic device description language (EDDL)《现场设备工具(FDT) 设备类型管理器(DTM)和电子设备描述语言(EDDL)交互性指南》.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC/TR 62795 Edition 1.0 2013-09 TECHNICAL REPORT Interoperation guide for field device tool (FDT) / device type manager (DTM) and electronic device description language (EDDL) IEC/TR 62795:2013(E) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rig

2、hts reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the reque

3、ster. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 9

4、19 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The te

5、chnical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publicatio

6、ns by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released

7、. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the In

8、ternational Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC/TR 62795 Edition 1.0 2013-09 TECHNICAL REPORT Interoper

9、ation guide for field device tool (FDT) / device type manager (DTM) and electronic device description language (EDDL) INTERNATIONAL ELECTROTECHNICAL COMMISSION U ICS 25.040.40; 35.240.50 PRICE CODE ISBN 978-2-8322-1116-8 Registered trademark of the International Electrotechnical Commission Warning!

10、Make sure that you obtained this publication from an authorized distributor. colour inside 2 TR 62795 IEC:2013(E) CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions, and abbreviations 7 3.1 Terms and definitions . 7 3.2 Abbreviations . 8 4 Typical methods

11、to convert EDD to FDT/DTM 8 4.1 Overview 8 4.2 Using a universal DTM to integrate the EDD document 9 General 9 4.2.1Basic contents of the transformation from EDD to DTM. 9 4.2.2Procedure . 10 4.2.3 4.3 Using a converting tool to integrate EDD documents 11 General 11 4.3.1Basic contents 12 4.3.2Proce

12、dure . 12 4.3.3 4.4 Generate an FDT/DTM based on EDD documents . 13 5 General requirements for the conversion from EDD to FDT . 13 5.1 Overview 13 5.2 Requirements for the agent interpreter . 13 General 13 5.2.1Standardized requirements of the basic parameters description 5.2.2. 16 Standardized requ

13、irements of the fieldbus communication 5.2.3 protocol mapping 17 Standardized requirements of the device parameters visual 5.2.4 description 17 Standardized requirements of error handling 18 5.2.5 5.3 The requirements of EDD document format 19 5.4 Requirements for EDD storage management 19 5.5 The u

14、ser interface style requirements of FDT/DTM converted from EDDL 20 Overview 20 5.5.1Basic requirements of the FDT/DTM interface design . 20 5.5.2FDT/DTM user interface . 20 5.5.3FDT/DTM user interface areas 21 5.5.4Parameter handling 24 5.5.5 Annex A (informative) Standard user interface of FDT/DTM

15、26 Bibliography 27 Figure 1 EDD to DTM conversion flowchart 11 Figure 2 EDD to DTM general process of conversion flowchart 12 Figure 3 Basic parameter description mapping . 17 Figure 4 Communication mapping 17 Figure 5 User interface mapping 18 Figure A.1 Specific example of FDT/DTMs standard user i

16、nterface . 26 TR 62795 IEC:2013(E) 3 Table 1 EDD basic elements 14 Table 2 The related interfaces of DTM . 15 Table 3 Standard user interface of FDT/DTM . 21 Table 4 Contents of Identification Area 21 Table 5 Contents of Action Area 22 Table 6 Elements of the Status Bar 23 Table 7 Connection states

17、of DTM . 23 Table 8 Data source states 24 Table 9 States of the instance data set 24 Table 10 Device diagnostic states 24 4 TR 62795 IEC:2013(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ INTEROPERATION GUIDE FOR FIELD DEVICE TOOL (FDT) / DEVICE TYPE MANAGER (DTM) AND ELECTRONIC DEVICE DESCRIPTION

18、LANGUAGE (EDDL) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standa

19、rdization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparatio

20、n is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with t

21、he International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subject

22、s since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical co

23、ntent of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent poss

24、ible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conform

25、ity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directo

26、rs, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising o

27、ut of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn

28、 to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. However, a technical committee

29、may propose the publication of a technical report when it has collected data of a different kind from that which is normally published as an International Standard, for example “state of the art“. IEC 62795, which is a technical report, has been prepared by subcommittee 65E: Devices and integration

30、in enterprise systems, of IEC technical committee 65: Industrial-process measurement, control and automation. The text of this technical report is based on the following documents: Enquiry draft Report on voting 65E/240/DTR 65E/330/RVC Full information on the voting for the approval of this technica

31、l report can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. TR 62795 IEC:2013(E) 5 The committee has decided that the contents of this publication will remain unchanged until the stability date indic

32、ated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour

33、 inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 6 TR 62795 IEC:2013(E) INTRODUCTION At present, there are two Inte

34、rnational Standards for device integration that describe the properties of automation system components to be used in host systems. They are IEC 61804 for electronic device description language (EDDL) and IEC 62453 for field device tools (FDT), with both standards having their own characteristics. T

35、he number of manufacturers and users using EDDL or FDT technologies is increasing, and investment in both of them is therefore increasing too. EDDL technology enables the integration of real product details using the tools of the engineering life cycle and specifies EDDL as a generic language for de

36、scribing the properties of automation system components. EDDL technology allows to transfer the properties of a device to a data set, called electronic device description (EDD), that can be interpreted by configuration tools in a host system. EDD files, representing the behavior and attributes of a

37、device, can be stored in the field device or control system. The interaction between a field device and a control system uses various communication protocols such as specified in IEC 61784-1, CP 1-1 (FF) or IEC 61784-1, CP 9-1 (HART 1 ). FDT is an open and independent software interface specificatio

38、n. An FDT specification describes software interface and relationships within the framework of the project (FDT container, FDT frame applications) and device software components in a Device Type Manager (DTM). An FDT framework is independent from the devices and fieldbus system, while the DTM depend

39、s on specific device and fieldbuses. Both technologies are supported by automation vendors and users, so that there is a need to generate a DTM based on an EDD as long as the field device integration (FDI) technology is not published as an International Standard. FDI (IEC 62769) covers device integr

40、ation and device management technology, combining base concepts and technology aspects of the EDDL (IEC 61804), FDT (IEC 62543) and OPC UA (IEC 62541-1). The combination of those different proven technologies ensures a secure life cycle and the ability to address all challenges of device integration

41、 and device management in a scalable manner. EDDL and FDT are complimentary in a way that an EDDL can be converted into an FDT-DTM. As long as FDI is not available, converting EDD into a DTM helps to combine the two standards and use EDDs in an FDT frame environment in case there is no specific DTM

42、available. The conversion criterion is based on EDDL and FDT technologies. _ 1HART is an example of a suitable product available commercially. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of this product. TR 62795 IEC:2013(E) 7

43、 INTEROPERATION GUIDE FOR FIELD DEVICE TOOL (FDT) / DEVICE TYPE MANAGER (DTM) AND ELECTRONIC DEVICE DESCRIPTION LANGUAGE (EDDL) 1 Scope This Technical Report provides the general requirements for converting an EDD into a DTM. Using this TR, an FDT/DTM developer can develop an EDD-DTM conversion tool

44、 that can be used to import, parse, and manage EDD to generate the corresponding DTM. A conversion tool versus a DTM written independent of an EDD helps the DTM generation to maintain consistency in function, data and presentation styles. 2 Normative references The following documents, in whole or i

45、n part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61804 (all parts), Function blocks (FB) f

46、or process control IEC 61804-3:2010, Function blocks (FB) for process control Part 3 Electronic Device Description Language (EDDL) IEC 62453-1:2009, Field device tool (FDT) interface specification Part 1: Overview and guidance 3 Terms, definitions, and abbreviations 3.1 Terms and definitions For the

47、 purposes of this document, the terms and definitions given in IEC 62453-1, IEC 61804-3, as well as the following apply. 3.1.1 agent interpreter analytical software for parsing EDD Note 1 to entry: An agent interpreter can parse out the elements in the EDD document and map to the DTM. Note 2 to entr

48、y: An agent interpreter can realize the interaction between the DTM and the physical device. 3.1.2 application software functional unit that is specific to the solution of a problem in industrial-process measurement and control Note 1 to entry: An application may be distributed across multiple resou

49、rces, and may communicate with other applications. SOURCE: IEC 61499-1:2005, 3.5 8 TR 62795 IEC:2013(E) 3.1.3 device type manager DTM device-specific application software components 3.1.4 field device tool FDT interfaces for data exchange among the field devices and control systems, engineering tools, and resource management system tools 3.2 Abbreviations BTM Block type manager COM Component object model CP Communication profile DCS Distributed control system D