SAE AS 85049 10B-2011 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL CABLE SEALING STRAIGHT SHIELD TERMINATION CATEGORY 1A (FOR AS50151 CRIMP MIL-DTL-26482 SERIES 2 AS817.pdf

《SAE AS 85049 10B-2011 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL CABLE SEALING STRAIGHT SHIELD TERMINATION CATEGORY 1A (FOR AS50151 CRIMP MIL-DTL-26482 SERIES 2 AS817.pdf》由会员分享，可在线阅读，更多相关《SAE AS 85049 10B-2011 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL CABLE SEALING STRAIGHT SHIELD TERMINATION CATEGORY 1A (FOR AS50151 CRIMP MIL-DTL-26482 SERIES 2 AS817.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、AEROSPACE STANDARD CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)AS85049/10Copyright 2011 SAE International All rights reserve

2、d. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)

3、 Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2001-07REVISED 2011-01THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 REV.BFEDERAL SUPPLY CLASS 5935 AS85049/10SHEET 1 OF 12REV. BPROCUREMENT SPECIFICATION: AS85049SAE Technica

4、l Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineering sciences. Theuse ofthis report is entirely voluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsib

5、ilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay bereaffirmed, revised, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS

6、85049/10BRATIONALE THIS REVISION IS REQUIRED TO INCORPORATE THE OUTSTANDING AMENDMENT AND UPDATE TO MEET SAE FORMAT GUIDELINES. NOTICE THE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS SPECIFICATION SHEET AND THE LATEST ISSUE OF SAE AS85049. FIGURE 1 - CONFIGURATION A

7、ND DIMENSIONS Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS85049/10SHEET 2 OF 12REV. BCONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, SHI

8、ELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)TABLE 1 - DIMENSIONS DASHNO . FITS SHELL OF CONNECTOR CLAMPSIZE A (SEE NOTE 6) STYLE B.125 D DIA MAXAS81703 SER 3 MIL-DTL-26482 SER 2 AS50151 CRIMP MIL-DTL-83723 SER III

9、 WIRE BUNDLE ACCOMMODATION RANGEMIN MAX 01 3 - - - 4 .125 (3.18) .250 (6.35) 1 2.00 (50.80) .669 (16.99) 02 3 - - - 4 .125 (3.18) .250 (6.35) 1 3.00 (76.20) .669 (16.99) 03 3 - - - 6 .250 (6.35) .437 (11.10) 2 2.75 (69.85) .669 (16.99) 04 3 - - - 6 .250 (6.35) .437 (11.10) 2 3.75 (95.25) .669 (16.99

10、) 05 - 8 8S 8 4 .125 (3.18) .250 (6.35) 1 2.00 (50.80) .617 (15.67) 06 - 8 8S 8 4 .125 (3.18) .250 (6.35) 1 3.00 (76.20) .617 (15.67) 07 - 8 8S 8 6 .250 (6.35) .437 (11.10) 2 2.75 (69.85) .617 (15.67) 08 - 8 8S 8 6 .250 (6.35) .437 (11.10) 2 3.75 (95.25) .617 (15.67) 09 - 10 10S,10SL 10 4 .125 (3.18

11、) .312 (7.92) 1 2.00 (50.80) .734 (18.64) 10 - 10 10S,10SL 10 4 .125 (3.18) .312 (7.92) 1 3.00 (76.20) .734 (18.64) 11 - 10 10S,10SL 10 6 .250 (6.35) .437 (11.10) 2 2.75 (69.85) .734 (18.64) 12 - 10 10S,10SL 10 6 .250 (6.35) .437 (11.10) 2 3.75 (95.25) .734 (18.64) 13 7 12 12,12S 12 6 .250 (6.35) .4

12、37 (11.10) 1 2.00 (50.80) .858 (21.79) 14 7 12 12,12S 12 6 .250 (6.35) .437 (11.10) 1 3.00 (76.20) .858 (21.79) 15 7 12 12,12S 12 10 .350 (8.89) .625 (15.88) 2 2.75 (69.85) .858 (21.79) 16 7 12 12,12S 12 10 .350 (8.89) .625 (15.88) 2 3.75 (95.25) .858 (21.79) 17 12 14 14,14S 14 10 .350 (8.89) .575 (

13、14.61) 1 2.00 (50.80) .984 (24.99) 18 12 14 14,14S 14 10 .350 (8.89) .575 (14.61) 1 3.00 (76.20) .984 (24.99) 19 12 14 14,14S 14 12 .500 (12.70) .750 (19.05) 2 2.75 (69.85) .984 (24.99) 20 12 14 14,14S 14 12 .500 (12.70) .750 (19.05) 2 3.75 (95.25) .984 (24.99) TABLE 1 - DIMENSIONS (CONTINUED) DASHN

14、O. EREF V THREAD CLASS 2A F DIA MAXGMAX01 1.06 (26.92) .625-24 UNEF - 4.28 (108.71) 02 2.06 (52.32) .625-24 UNEF - 5.28 (134.11) 03 1.81 (45.97) .750-20 UNEF .858 (21.79) 5.02 (127.51) 04 2.81 (71.37) .750-20 UNEF .858 (21.79) 6.02 (152.91) 05 1.06 (26.92) .625-24 UNEF - 4.28 (108.71) 06 2.06 (52.32

15、) .625-24 UNEF - 5.28 (134.11) 07 1.81 (45.97) .750-20 UNEF .858 (21.79) 5.02 (127.51) 08 2.81 (71.37) .750-20 UNEF .858 (21.79) 6.02 (152.91) 09 1.06 (26.92) .625-24 UNEF - 4.28 (108.71) 10 2.06 (52.32) .625-24 UNEF - 5.28 (134.11) 11 1.81 (45.97) .750-20 UNEF .858 (21.79) 5.02 (127.51) 12 2.81 (71

16、.37) .750-20 UNEF .858 (21.79) 6.02 (152.91) 13 1.06 (26.92) .750-20 UNEF - 4.26 (108.20) 14 2.06 (52.32) .750-20 UNEF - 5.26 (133.60) 15 1.67 (42.42) 1.000-20 UNEF 1.112 (28.24) 5.02 (127.51) 16 2.67 (67.82) 1.000-20 UNEF 1.112 (28.24) 6.02 (152.91) 17 0.92 (23.37) 1.000-20 UNEF - 4.26 (108.20) 18

17、1.92 (48.77) 1.000-20 UNEF - 5.26 (133.60) 19 1.67 (42.42) 1.1875-18 UNEF 1.218 (30.94) 5.08 (129.03) 20 2.87 (72.90) 1.1875-18 UNEF 1.218 (30.94) 6.08 (154.43) Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license fro

18、m IHS-,-,-AEROSPACE STANDARD AS85049/10SHEET 3 OF 12REV. BCONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)TABLE 1 - DIMENSIONS (

19、CONTINUED) DASHNO . FITS SHELL OF CONNECTOR CLAMPSIZE A (SEE NOTE 6) STYLE B.125 D DIA MAXAS81703 SER 3 MIL-DTL-26482 SER 2 AS50151 CRIMP MIL-DTL-83723 SER III WIRE BUNDLE ACCOMMODATION RANGEMIN MAX 21 19 16 16,16S 16 12 .500 (12.70) .700 (17.78) 1 2.00 (50.80) 1.112 (28.24) 22 19 16 16,16S 16 12 .5

20、00 (12.70) .700 (17.78) 1 3.00 (76.20) 1.112 (28.24) 23 19 16 16,16S 16 16 .625 (15.88) .937 (23.80) 2 2.75 (69.85) 1.112 (28.24) 24 19 16 16,16S 16 16 .625 (15.88) .937 (23.80) 2 3.75 (95.25) 1.112 (28.24) 25 27 18 18 18 10 .350 (8.89) .625 (15.88) 1 2.00 (50.80) 1.218 (30.94) 26 27 18 18 18 10 .35

21、0 (8.89) .625 (15.88) 1 3.00 (76.20) 1.218 (30.94) 27 27 18 18 18 12 .500 (12.70) .750 (19.05) 1 2.00 (50.80) 1.218 (30.94) 28 27 18 18 18 12 .500 (12.70) .750 (19.05) 1 3.00 (76.20) 1.218 (30.94) 29 27 18 18 18 16 .625 (15.88) .937 (23.80) 2 2.75 (69.85) 1.218 (30.94) 30 27 18 18 18 16 .625 (15.88)

22、 .937 (23.80) 2 3.75 (95.25) 1.218 (30.94) 31 37 20 20 20 10 .350 (8.89) .625 (15.88) 1 3.00 (76.20) 1.345 (34.16) 32 37 20 20 20 10 .350 (8.89) .625 (15.88) 1 4.00 (101.60) 1.345 (34.16) 33 37 20 20 20 12 .500 (12.70) .750 (19.05) 1 3.00 (76.20) 1.345 (34.16) 34 37 20 20 20 12 .500 (12.70) .750 (19

23、.05) 1 4.00 (101.60) 1.345 (34.16) 35 37 20 20 20 16 .625 (15.88) .937 (23.80) 2 3.75 (95.25) 1.345 (34.16) 36 37 20 20 20 16 .625 (15.88) .937 (23.80) 2 4.75 (120.65) 1.345 (34.16) 37 37 20 20 20 20 .875 (22.23) 1.250 (31.75) 2 3.75 (95.25) 1.345 (34.16) 38 37 20 20 20 20 .875 (22.23) 1.250 (31.75)

24、 2 4.75 (120.65) 1.345 (34.16) 39 - 22 22 22 10 .350 (8.89) .625 (15.88) 1 3.00 (76.20) 1.468 (37.29) 40 - 22 22 22 10 .350 (8.89) .625 (15.88) 1 4.00 (101.60) 1.468 (37.29) TABLE 1 - DIMENSIONS (CONTINUED) DASHNO. EREF V THREAD CLASS 2A F DIA MAXGMAX21 0.92 (23.37) 1.1875-18 UNEF - 4.33 (109.98) 22

25、 1.92 (48.77) 1.1875-18 UNEF - 5.33 (135.38) 23 1.67 (42.42) 1.4375-18 UNEF 1.468 (37.29) 5.17 (131.32) 24 2.67 (67.82) 1.4375-18 UNEF 1.468 (37.29) 6.17 (156.72) 25 0.92 (23.37) 1.000-20 UNEF - 4.26 (108.20) 26 1.92 (48.77) 1.000-20 UNEF - 5.26 (133.60) 27 0.92 (23.37) 1.1875-18 UNEF - 4.33 (109.98

26、) 28 1.92 (48.77) 1.1875-18 UNEF - 5.33 (135.38) 29 1.67 (42.42) 1.4375-18 UNEF 1.468 (37.29) 5.17 (131.32) 30 2.67 (67.82) 1.4375-18 UNEF 1.468 (37.29) 6.17 (156.72) 31 1.92 (48.77) 1.000-20 UNEF - 5.26 (133.60) 32 2.92 (74.17) 1.000-20 UNEF - 6.26 (159.00) 33 1.92 (48.77) 1.1875-18 UNEF - 5.33 (13

27、5.38) 34 2.92 (74.17) 1.1875-18 UNEF - 6.33 (160.78) 35 2.67 (67.82) 1.4375-18 UNEF 1.468 (37.29) 6.17 (156.72) 36 3.67 (93.22) 1.4375-18 UNEF 1.468 (37.29) 7.17 (182.12) 37 2.67 (67.82) 1.750-18 UNS 1.969 (50.01) 6.32 (160.53) 38 3.67 (93.22) 1.750-18 UNS 1.969 (50.01) 7.32 (185.93) 39 1.92 (48.77)

28、 1.000-20 UNEF - 5.26 (133.60) 40 2.92 (74.17) 1.000-20 UNEF - 6.26 (159.00) Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS85049/10SHEET 4 OF 12REV. BCONNECTOR ACCESSORIES, ELE

29、CTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)TABLE 1 - DIMENSIONS (CONTINUED) DASHNO . FITS SHELL OF CONNECTOR CLAMPSIZE A (SEE NOTE 6) STYLE B.125 D D

30、IA MAXAS81703 SER 3 MIL-DTL-26482 SER 2 AS50151 CRIMP MIL-DTL-83723 SER III WIRE BUNDLE ACCOMMODATION RANGEMIN MAX 41 - 22 22 22 12 .500 (12.70) .750 (19.05) 1 3.00 (76.20) 1.468 (37.29) 42 - 22 22 22 12 .500 (12.70) .750 (19.05) 1 4.00 (101.60) 1.468 (37.29) 43 - 22 22 22 16 .625 (15.88) .937 (23.8

31、0) 1 3.00 (76.20) 1.468 (37.29) 44 - 22 22 22 16 .625 (15.88) .937 (23.80) 1 4.00 (101.60) 1.468 (37.29) 45 - 22 22 22 20 .875 (22.23) 1.250 (31.75) 2 3.75 (95.25) 1.468 (37.29) 46 - 22 22 22 20 .875 (22.23) 1.250 (31.75) 2 4.75 (120.65) 1.468 (37.29) 47 - 24 24 24 12 .500 (12.70) .750 (19.05) 1 3.0

32、0 (76.20) 1.593 (40.46) 48 - 24 24 24 12 .500 (12.70) .750 (19.05) 1 4.00 (101.60) 1.593 (40.46) 49 - 24 24 24 16 .625 (15.88) .812 (20.62) 1 3.00 (76.20) 1.593 (40.46) 50 - 24 24 24 16 .625 (15.88) .812 (20.62) 1 4.00 (101.60) 1.593 (40.46) 51 - 24 24 24 16 .625 (15.88) .937 (23.80) 1 3.00 (76.20)

33、1.593 (40.46) 52 - 24 24 24 16 .625 (15.88) .937 (23.80) 1 4.00 (101.60) 1.593 (40.46) 53 - 24 24 24 20 .875 (22.23) 1.250 (31.75) 2 3.75 (95.25) 1.593 (40.46) 54 - 24 24 24 20 .875 (22.23) 1.250 (31.75) 2 4.75 (120.65) 1.593 (40.46) 55 - - 28 - 12 .500 (12.70) .750 (19.05) 1 3.00 (76.20) 1.969 (50.

34、01) 56 - - 28 - 12 .500 (12.70) .750 (19.05) 1 4.00 (101.60) 1.969 (50.01) 57 - - 28 - 16 .625 (15.88) .937 (23.80) 1 3.00 (76.20) 1.969 (50.01) 58 - - 28 - 16 .625 (15.88) .937 (23.80) 1 4.00 (101.60) 1.969 (50.01) 59 - - 28 - 20 .875 (22.23) 1.250 (31.75) 1 3.00 (76.20) 1.969 (50.01) 60 - - 28 - 2

35、0 .875 (22.23) 1.250 (31.75) 1 4.00 (101.60) 1.969 (50.01) TABLE 1 - DIMENSIONS (CONTINUED) DASHNO. EREF V THREAD CLASS 2A F DIA MAXGMAX41 1.92 (48.77) 1.1875-18 UNEF - 5.33 (135.38) 42 2.92 (74.17) 1.1875-18 UNEF - 6.33 (160.78) 43 1.92 (48.77) 1.4375-18 UNEF - 5.42 (137.67) 44 2.92 (74.17) 1.4375-

36、18 UNEF - 6.42 (163.07) 45 2.67 (67.82) 1.750-18 UNS 1.969 (50.01) 6.26 (159.00) 46 3.67 (93.22) 1.750-18 UNS 1.969 (50.01) 7.26 (184.40) 47 1.92 (48.77) 1.1875-18 UNEF - 5.33 (135.38) 48 2.92 (74.17) 1.1875-18 UNEF - 6.33 (160.78) 49 1.92 (48.77) 1.4375-18 UNEF - 5.42 (137.67) 50 2.92 (74.17) 1.437

37、5-18 UNEF - 6.42 (163.07) 51 1.92 (48.77) 1.4375-18 UNEF - 5.42 (137.67) 52 2.92 (74.17) 1.4375-18 UNEF - 6.42 (163.07) 53 2.67 (67.82) 1.750-18 UNS 1.969 (50.01) 6.26 (159.00) 54 3.67 (93.22) 1.750-18 UNS 1.969 (50.01) 7.26 (184.40) 55 1.92 (48.77) 1.1875-18 UNEF - 5.34 (135.64) 56 2.92 (74.17) 1.1

38、875-18 UNEF - 6.34 (161.04) 57 1.92 (48.77) 1.4375-18 UNEF - 5.42 (137.67) 58 2.92 (74.17) 1.4375-18 UNEF - 6.42 (163.07) 59 1.92 (48.77) 1.750-18 UNS - 5.57 (141.48) 60 2.92 (74.17) 1.750-18 UNS - 6.57 (166.88) Copyright SAE International Provided by IHS under license with SAENot for ResaleNo repro

39、duction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS85049/10SHEET 5 OF 12REV. BCONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL

40、-83723 SERIES III CONNECTORS)TABLE 1 - DIMENSIONS (CONTINUED) DASHNO . FITS SHELL OF CONNECTOR CLAMPSIZE A (SEE NOTE 6) STYLE B.125 D DIA MAXAS81703 SER 3 MIL-DTL-26482 SER 2 AS50151 CRIMP MIL-DTL-83723 SER III WIRE BUNDLE ACCOMMODATION RANGEMIN MAX 61 - - 28 - 24 1.000 (25.40) 1.375 (34.93) 1 3.00

41、(76.20) 1.969 (50.01) 62 - - 28 - 24 1.000 (25.40) 1.375 (34.93) 1 4.00 (101.60) 1.969 (50.01) 63 - - 32 - 16 .625 (15.88) .937 (23.80) 1 3.00 (76.20) 2.219 (56.36) 64 - - 32 - 16 .625 (15.88) .937 (23.80) 1 4.00 (101.60) 2.219 (56.36) 65 - - 32 - 20 .875 (22.23) 1.250 (31.75) 1 3.00 (76.20) 2.219 (

42、56.36) 66 - - 32 - 20 .875 (22.23) 1.250 (31.75) 1 4.00 (101.60) 2.219 (56.36) 67 - - 32 - 24 1.000 (25.40) 1.375 (34.93) 1 3.00 (76.20) 2.219 (56.36) 68 - - 32 - 24 1.000 (25.40) 1.375 (34.93) 1 4.00 (101.60) 2.219 (56.36) 69 - - 32 - 28 1.250 (31.75) 1.625 (41.28) 1 3.00 (76.20) 2.219 (56.36) 70 -

43、 - 32 - 28 1.250 (31.75) 1.625 (41.28) 1 4.00 (101.60) 2.219 (56.36) 71 - - 36 - 20 .875 (22.23) 1.250 (31.75) 1 4.00 (101.60) 2.469 (62.71) 72 - - 36 - 20 .875 (22.23) 1.250 (31.75) 1 5.00 (127.00) 2.469 (62.71) 73 - - 36 - 24 1.000 (25.40) 1.375 (34.93) 1 4.00 (101.60) 2.469 (62.71) 74 - - 36 - 24

44、 1.000 (25.40) 1.375 (34.93) 1 5.00 (127.00) 2.469 (62.71) 75 - - 36 - 28 1.250 (31.75) 1.625 (41.28) 1 4.00 (101.60) 2.469 (62.71) 76 - - 36 - 28 1.250 (31.75) 1.625 (41.28) 1 5.00 (127.00) 2.469 (62.71) 77 - - 36 - 32 1.437 (36.50) 1.875 (47.63) 2 4.88 (123.95) 2.469 (62.71) 78 - - 36 - 32 1.437 (

45、36.50) 1.875 (47.63) 2 5.88 (149.35) 2.469 (62.71) 79 - - 40 - 20 .875 (22.23) 1.250 (31.75) 1 4.00 (101.60) 2.719 (69.06) 80 - - 40 - 20 .875 (22.23) 1.250 (31.75) 1 5.00 (127.00) 2.719 (69.06) TABLE 1 - DIMENSIONS (CONTINUED) DASHNO. EREF V THREAD CLASS 2A F DIA MAXGMAX61 1.92 (48.77) 2.000-18 UNS

46、 - 5.60 (142.24) 62 2.92 (74.17) 2.000-18 UNS - 6.60 (167.64) 63 1.92 (48.77) 1.4375-18 UNEF - 5.42 (137.67) 64 2.92 (74.17) 1.4375-18 UNEF - 6.42 (163.07) 65 1.92 (48.77) 1.750-18 UNS - 5.57 (141.48) 66 2.92 (74.17) 1.750-18 UNS - 6.57 (166.88) 67 1.92 (48.77) 2.000-18 UNS - 5.60 (142.24) 68 2.92 (

47、74.17) 2.000-18 UNS - 6.60 (167.64) 69 1.92 (48.77) 2.250-16 UN - 5.86 (148.84) 70 2.92 (74.17) 2.250-16 UN - 6.86 (174.24) 71 2.92 (74.17) 1.750-18 UNS - 6.57 (166.88) 72 3.92 (99.57) 1.750-18 UNS - 7.57 (192.28) 73 2.92 (74.17) 2.000-18 UNS - 6.60 (167.64) 74 3.92 (99.57) 2.000-18 UNS - 7.60 (193.

48、04) 75 2.92 (74.17) 2.250-16 UN - 6.86 (174.24) 76 3.92 (99.57) 2.250-16 UN - 7.86 (199.64) 77 3.80 (96.52) 2.500-16 UN 2.719 (69.06) 7.70 (195.58) 78 4.80 (121.92) 2.500-16 UN 2.719 (69.06) 8.70 (220.98) 79 2.92 (74.17) 1.750-18 UNS - 6.57 (166.88) 80 3.92 (99.57) 1.750-18 UNS - 7.57 (192.28) Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS85049/10SHEET 6 OF 12REV. BCONNECTOR ACCESSORIES,