NFPA 385-2017 Standard for Tank Vehicles for Flammable and Combustible Liquids (Effective Date 8 8 2016).pdf

《NFPA 385-2017 Standard for Tank Vehicles for Flammable and Combustible Liquids (Effective Date 8 8 2016).pdf》由会员分享，可在线阅读，更多相关《NFPA 385-2017 Standard for Tank Vehicles for Flammable and Combustible Liquids (Effective Date 8 8 2016).pdf（29页珍藏版）》请在麦多课文档分享上搜索。

1、 NFPA 385 2017 Standard for Tank Vehicles for Flammable and Combustible LiquidsIMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA STANDARDS NOTICE AND DISCLAIMER OF LIABILITY CONCERNING THE USE OF NFPA STANDARDS NFPA codes, standards, recommended practices, and guides (“NFPA Standards”), of which the

2、 document contained herein is one, are developed through a consensus standards development process approved by the American National Standards Institute. This process brings together volunteers representing varied viewpoints and interests to achieve consensus on re and other safety issues. While the

3、 NFPA administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgments contained in NFPA Standards. The NFPA disclaims liability for any personal in

4、jury, property or other damages of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or reliance on NFPA Standards. The NFPA also makes no guaranty or warranty as to the accuracy or completeness of any info

5、rmation published herein. In issuing and making NFPA Standards available, the NFPA is not undertaking to render professional or other services for or on behalf of any person or entity. Nor is the NFPA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this doc

6、ument should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. The NFPA has no power, nor does it undertake, to police or enforce compliance with the contents of NFPA

7、Standards. Nor does the NFPA list, certify, test, or inspect products, designs, or installations for compliance with this document. Any certication or other statement of compliance with the requirements of this document shall not be attributable to the NFPA and is solely the responsibility of the ce

8、rtier or maker of the statement. REMINDER: UPDATING OF NFPA STANDARDS Users of NFPA codes, standards, recommended practices, and guides (“NFPA Standards”) should be aware that NFPA Standards may be amended from time to time through the issuance of Tentative Interim Amendments or corrected by Errata.

9、 An ofcial NFPA Standard at any point in time consists of the current edition of the document together with any Tentative Interim Amendment and any Errata then in effect. In order to determine whether an NFPA Standard has been amended through the issuance of Tentative Interim Amendments or corrected

10、 by Errata, visit the “Codes email: stds_adminnfpa.org. For more information about NFPA, visit the NFPA website at www.nfpa.org. All NFPA codes and standards can be viewed at no cost at www.nfpa.org/docinfo.385-1 NFPA and National Fire Protection Association are registered trademarks of the National

11、 Fire Protection Association, Quincy, Massachusetts 02169. Copyright 2016 National Fire Protection Association . All Rights Reserved. NFPA 385 Standard for Tank Vehicles for Flammable and Combustible Liquids 2017 Edition This edition of NFPA 385, Standard for Tank Vehicles for Flammable and Combusti

12、ble Liquids, was prepared by the Technical Committee on Transportation of Flammable Liquids. It was issued by the Standards Council on July 19, 2016, with an effective date of August 8, 2016, and supersedes all previous editions. This edition of NFPA 385 was approved as an American National Standard

13、 on August 8, 2016. Origin and Development of NFPA 385 This standards project was initiated in 1926, and the rst edition of NFPA 385 was ofcially adopted in 1929. NFPA 385 was revised in 1933, 1948, 1953, 1954, 1955, 1957, 1958, 1959, 1960, 1963, 1964, 1966, 1971, 1974, 1979, 1985, 1990, 2000, 2006,

14、 and 2011. Editions prior to 1948 had different titles. The 2000 edition incorporated the following amendments: (1) Revised requirements for warning signs, in 3-4.5 (2) Revised requirements for re extinguishers for tank vehicles, in 6-3.1 The 2007 edition incorporated the following amendments: (1) R

15、evised denitions to correlate with NFPA 30, Flammable and Combustible Liquids Code (2) Correction of an error in 6.3.1 related to re extinguisher rating (3) Complete editorial revision to comply with the NFPA Manual of Style for NFPA Technical Committee Documents The 2012 edition incorporated the fo

16、llowing amendments: (1) Addition of NFPA standard statements of retroactivity (1.4), equivalency (1.5), and units and formulas (1.6), as specied in Manual of Style for NFPA Technical Committee Documents (2) Replacement of the denitions for combustible liquid and ammable liquid with the denitions spe

17、cied by NFPA 30, Flammable and Combustible Liquids Code (3) Addition of new 8.2.6.1 prohibiting the storage of ammable or combustible materials in any enclosure intended for an auxiliary generator or motor (4) Expansion of 9.1.1 to include training of drivers in emergency and safety procedures and a

18、ddition of an annex item (A.9.1.1) detailing some of the procedures to be addressed (5) In 9.2.16, addition of a requirement to chock the wheels of the tank vehicle in addition to setting the parking brake prior to cargo transfer (6) In new 9.3.1.1, specication of a minimum discharge rate for the po

19、rtable extinguisher mounted on the tank vehicle (7) Clarication of the mounting location for the portable extinguisher mounted on the tank vehicle The 2017 edition incorporates the following amendments: (1) Revision of 9.3.4 to be consistent with the provisions of NFPA 10, Standard for Portable Fire

20、 Extinguishers (2) Updating of all referenced publications in Chapter 2 and Annex C to current editionsTANK VEHICLES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS 385-2 2017 Edition Technical Committee on Transportation of Flammable Liquids David W. Hollinger, Chair Drexel University, PA U Scott R. Connor,

21、Team-1 Academy Inc., Canada IM Todd M. Hetrick, Exponent, Inc., IL SE Steven P. Iovinelli, Franklin Park Fire Department, IL E James R. Kittrell, KSE, Inc., MA SE J. R. Nerat, UTC/Badger Fire Protection, MI M Jeff Sims, Truck Trailer Manufacturers Association, VA M Jacob Waldschmidt, City of Kenosha

22、 Fire Department, WI E Robert P. Benedetti, NFPA Staff Liaison This list represents the membership at the time the Committee was balloted on the nal text of this edition. Since that time, changes in the membership may have occurred. A key to classications is found at the back of the document. NOTE:

23、Membership on a committee shall not in and of itself constitute an endorsement of the Association or any document developed by the committee on which the member serves. Committee Scope: This Committee shall have primary responsibility for documents on safeguarding against the re and explosion hazard

24、s associated with over-the-road transportation of ammable and combustible liquids in tank vehicles and in portable tanks and containers.CONTENTS 385-3 2017 Edition Contents Chapter 1 Administration 385 4 1.1 Scope. . 385 4 1.2 Purpose. . 385 4 1.3 Application. (Reserved) 385 4 1.4 Retroactivity. 385

25、 4 1.5 Equivalency. 385 4 1.6 Units and Formulas. . 385 4 1.7 Enforcement. (Reserved) . 385 5 Chapter 2 Referenced Publications 385 5 2.1 General. 385 5 2.2 NFPA Publications. 385 5 2.3 Other Publications. . 385 5 2.4 References for Extracts in Mandatory Sections.385 5 Chapter 3 Denitions . 385 5 3.

26、1 General. 385 5 3.2 NFPA Ofcial Denitions. 385 5 3.3 General Denitions. 385 6 Chapter 4 Classication of Flammable and Combustible Liquids 385 6 4.1 Scope. . 385 6 4.2 Classication of Liquids. . 385 6 Chapter 5 Tank Vehicle Design 385 6 5.1 Requirements Applicable to All Tank Vehicles General. 385 6

27、 5.2 Cargo Tanks, Piping, and Connections Designed for Transporting Flammable or Combustible Liquids at Temperatures at or Above Their Boiling Points. 385 7 5.3 Cargo Tanks, Piping, and Connections Designed for Transfer of Flammable or 385 7 Combustible Liquids at Temperatures Below Their Boiling Po

28、ints. . 5.4 Emergency-Discharge Control. . 385 12 5.5 Testing. 385 12 5.6 Separation to Prevent Intermixing. 385 13 5.7 Lighting. . 385 13 Chapter 6 Asphalt Tank Vehicles . 385 13 6.1 General. 385 13 6.2 Vents for Cargo Tanks. . 385 13 6.3 Overows and Drains. 385 13 6.4 Burners and Burner Tubes. . 3

29、85 13 Chapter 7 Marking on Tank Vehicles 385 13 7.1 General. 385 13 Chapter 8 Auxiliary Equipment . 385 14 8.1 Auxiliary Internal Combustion Engines. . 385 14 8.2 Auxiliary Electric Generators and Motors. 385 14 8.3 Pumps and Hose. . 385 14 Chapter 9 Operation of Tank Vehicles . 385 15 9.1 General O

30、perating Conditions. 385 15 9.2 Loading and Unloading of Tank Vehicles. . 385 15 9.3 Fire Extinguishers. . 385 16 Annex A Explanatory Material 385 16 Annex B Precautions Against Ignition by Static Electricity . 385 18 Annex C Informational References 385 19 Index . 385 21TANK VEHICLES FOR FLAMMABLE

31、AND COMBUSTIBLE LIQUIDS 385-4 2017 Edition NFPA 385 Standard for Tank Vehicles for Flammable and Combustible Liquids 2017 Edition IMPORTANT NOTE: This NFPA document is made available for use subject to important notices and legal disclaimers. These notices and disclaimers appear in all publications

32、containing this document and may be found under the heading “Important Notices and Disclaimers Concerning NFPA Standards.” They can also be viewed at www.nfpa.org/disclaimers or obtained on request from NFPA. UPDATES, ALERTS, AND FUTURE EDITIONS: New editions of NFPA codes, standards, recommended pr

33、actices, and guides (i.e., NFPA Standards) are released on scheduled revision cycles. This edition may be superseded by a later one, or it may be amended outside of its scheduled revision cycle through the issuance of Tenta tive Interim Amendments (TIAs). An ofcial NFPA Standard at any point in time

34、 consists of the current edition of the document, together with all TIAs and Errata in effect. To verify that this document is the current edition or to determine if it has been amended by TIAs or Errata, please consult the National Fire Codes Subscription Service or the “List of NFPA Codes & Standa

35、rds” at www.nfpa.org/docinfo. In addition to TIAs and Errata, the document information pages also include the option to sign up for alerts for individual documents and to be involved in the development of the next edition. NOTICE: An asterisk (*) following the number or letter designating a paragrap

36、h indicates that explanatory material on the paragraph can be found in Annex A. A reference in brackets following a section or paragraph indicates material that has been extracted from another NFPA document. As an aid to the user, the complete title and edition of the source documents for extracts i

37、n mandatory sections of the document are given in Chapter 2 and those for extracts in informational sections are given in Annex C. Extracted text may be edited for consistency and style and may include the revision of internal paragraph references and other references as appropriate. Requests for in

38、terpretations or revisions of extracted text shall be sent to the technical committee respon sible for the source document. Information on referenced publications can be found in Chapter 2 and Annex C. Chapter 1 Administration 1.1 Scope. 1.1.1* This standard shall apply to tank vehicles used for the

39、 transportation of asphalt and for the transportation of normally stable ammable and combustible liquids with ash points below 200F (93C). 1.1.2 This standard shall also provide minimum requirements for the design and construction of cargo tanks and their appur tenances and shall set forth certain m

40、atters pertaining to tank vehicles. 1.1.3 The provisions of this standard shall not preclude the use of additional safeguards for tank vehicles used for the trans portation of ammable and combustible liquids having charac teristics that introduce additional factors such as high rates of expansion, i

41、nstability, corrosiveness, and toxicity. 1.1.4 The provisions of this standard shall also apply to cutback asphalts that have ash points below 100F (37.8C) and to liquids transported at temperatures elevated above their ash points. 1.1.5 The requirements for aircraft fuel servicing tank vehicles sha

42、ll be in accordance with NFPA 407. 1.1.6 A tank vehicle transporting a ammable or combustible liquid in interstate service shall be considered to be in compli ance with this standard while it is in interstate service if it meets the requirements of the U.S. Department of Transportation in 49 CFR 171

43、179, “Hazardous Materials Regulations.” 1.2 Purpose. The purpose of this standard shall be to provide for safe transportation of ammable and combustible liquids in tank vehicles. 1.3 Application. (Reserved) 1.4 Retroactivity. The provisions of this standard reect a consensus of what is necessary to

44、provide an acceptable degree of protection from the hazards addressed in this standard at the time the standard was issued. 1.4.1 Unless otherwise specied, the provisions of this stand ard shall not apply to facilities, equipment, structures, or instal lations that existed or were approved for const

45、ruction or installation prior to the effective date of the standard. Where specied, the provisions of this standard shall be retroactive. 1.4.2 In those cases where the authority having jurisdiction determines that the existing situation presents an unacceptable degree of risk, the authority having

46、jurisdiction shall be permit ted to apply retroactively any portions of this standard deemed appropriate. 1.4.3 The retroactive requirements of this standard shall be permitted to be modied if their application clearly would be impractical in the judgment of the authority having jurisdiction and onl

47、y where it is clearly evident that a reasonable degree of safety is provided. 1.5 Equivalency. Nothing in this standard is intended to prevent the use of systems, methods, or devices of equivalent or superior quality, strength, re resistance, effectiveness, durabil ity, and safety over those prescri

48、bed by this standard. 1.5.1 Technical documentation shall be submitted to the authority having jurisdiction to demonstrate equivalency. 1.5.2 The system, method, or device shall be approved for the intended purpose by the authority having jurisdiction. 1.6 Units and Formulas. 1.6.1 The units of meas

49、ure in this standard are presented rst in U.S. customary units (inch-pound units). International System (SI) units follow the inch-pound units in parentheses. 1.6.2 Either system of units shall be acceptable for satisfying the requirements in this standard. 1.6.3 Users of this standard shall apply one system of units consistently and shall not alternate between systems of units.