ITU-T Q 1208-1997 General aspects of the Intelligent Network Application protocol (Study Group 11 8 pp)《IN应用协议一般概念》.pdf

《ITU-T Q 1208-1997 General aspects of the Intelligent Network Application protocol (Study Group 11 8 pp)《IN应用协议一般概念》.pdf》由会员分享，可在线阅读，更多相关《ITU-T Q 1208-1997 General aspects of the Intelligent Network Application protocol (Study Group 11 8 pp)《IN应用协议一般概念》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、INTERNATIONAL TELECOMMUNICATION UN ION ITU-T TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU SERIES Q: SWITCHING AND SIGNALLING Intelligent Network Q.1208 (09197) General aspects of the Intelligent Network Application protocol ITU-T Recommendation Q.1208 (Previously CCITT Recommendation) ITU-T Q-SER

2、IES RECOMMENDATIONS SWITCHING AND SIGNALLING _ SIGNALLING IN THE INTERNATIONAL MANUAL SERVICE INTERNATIONAL AUTOMATIC AND SEMI-AUTOMATIC WORKING FUNCTIONS AND INFORMATION FLOWS FOR SERVICES IN THE ISDN CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS SPECIFICATIONS OF SIGNALLING SYSTEMS No. 4 AND No. 5

3、SPECIFICATIONS OF SIGNALLING SYSTEM No. 6 SPECIFICATIONS OF SIGNALLING SYSTEM R 1 SPECIFICATIONS OF SIGNALLING SYSTEM R2 DIGITAL EXCHANGES INTERWORKING OF SIGNALLING SYSTEMS SPECIFICATIONS OF SIGNALLING SYSTEM No. 7 DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 1 PUBLIC LAND MOBILE NETWORK INTERWORKING W

4、ITH SATELLITE MOBILE SYSTEMS INTELLIGENT NETWORK BROADBAND ISDN _ Q. 1-Q.3 Q.4-Q.59 Q.60-Q.99 Q.100-Q.119 Q. 120-Q.249 Q ,250-Q.309 Q.3 10-Q.399 Q.400-Q.499 Q.500-Q.599 Q.600-Q.699 Q.700-Q. 849 Q.S.5O-Q ,999 Q. 1000-Q. 1099 Q.1 lOO-Q.1199 Q.1200-Q.1999 Q.2000-Q .2999 For further details, please refe

5、r to ITU-T List of Recommendations ITU-T RECOMMENDATION Q.1208 GENERAL ASPECTS OF THE INTELLIGENT NETWORK APPLICATION PROTOCOL Summary The objective of this Recommendation is to specify the definition methodology to be applied to the Intelligent Network application protocol Recommendations defined i

6、n specific capability sets. This Recommendation is not expected to change greatly in future versions with the possible exception of additional specification mechanisms. Associated standardization work is contained in all of the Q.12xx IN Recommendations and more particularly in the Q. 12x8 INAP Reco

7、mmendations. Source ITU-T Recommendation Q.1208 was revised by ITU-T Study Group 11 (1997-2000) and was approved under the WTSC Resolution No. 1 procedure on the 12th of September 1997. Recommendation 4.1208 (09/97) i STD-ITU-T RECMN 6I.LZU-ENGL 1777 YBb257L nb44291 517 H FOREWORD ITU (International

8、 Telecommunication Union) is the United Nations Specialized Agency in the field of telecommuni- cations. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of the ITU. The ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendatio

9、ns on them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standardization Conference (WTSC), which meets every four years, establishes the topics for study by the ITU-T Study Groups which, in their turn, produce Recommendations on these topics. The

10、approval of Recommendations by the Members of the ITU-T is covered by the procedure laid down in WTSC Resolution No. 1. In some areas of information technology which fall within ITU-Ts purview, the necessary standards are prepared on a collaborative basis with IS0 and EC. NOTE In this Recommendation

11、? the expression “Administration“ is used for conciseness to indicate both a telecommunication administration and a recognized operating agency. INTELLECTUAL PROPERTY RIGHTS The ITU draws attention to the possibility that the practice or implementation of this Recommendation may involve the use of a

12、 claimed Intellectual Property Right. The ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process. As of the date of approval of this Recommendation,

13、the ITU had not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementors are cautioned that this may not represent the latest information and are therefore strongly urged to consult the TSB patent database. O ITU 19

14、98 All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU. 11 Recommendation 4.1208 (09/97) CONTENTS Page 1 Introduction . . 1 2 Background

15、1 3 Definition methodology . . 1 4 Evolutionary requirements 1 4.1 Rules for adding new parameters to INAP . 2 Rules/guidelines for development of IN call party handling 4.2 2 Recommendation 4.1208 (09/97) . 111 STD-ITU-T RECMN Q.1208-ENGL 1997 48b259L Ob44273 391 Recommendation Q.1208 GENERAL ASPEC

16、TS OF THE INTELLIGENT NETWORK APPLICATION PROTOCOL (revised in I99 7) 1 Introduction This Recommendation defines the general aspects of the interfaces and protocols. For the detailed protocols and interfaces supported in each capability set, refer to the Q. 12x8 Recommendation for that capability se

17、t. 2 Bac kg r o u n d All the work on interface specifications is based on the IN Functional Model (INFM). Each capability set will support a number of the interfaces defined in that model appropriate to the requirements placed upon that capability set. 3 Definition methodology The definition of the

18、 protocol can be split into three sections: - the definition of the service which the protocol provides (primitives etc.); - the definition of the operations transferred between entities; - the definition of the actions taken at each entity as a result of performing the operations. The primitives ar

19、e defined in a tabular notation and may be omitted. The operation definitions are in Abstract Syntax Notation 1 (ASN.1, see Recommendation X.680. The actions are defined in terms of state transition diagrams. Other definition techniques may be used in future capability sets to supplement or replace

20、these if this seems appropriate. The INAP is a ROSE user protocol (see Recommendation X.219Bc.229). The ROSE protocol is contained within the component sublayer of TCAP (see Recommendations Q.771 to Q.775) and DSS 1 (Recommendation Q.932). At present the ROSE APDUs are conveyed in transaction sublay

21、er messages in SS No. 7 and in the Q.93 1 REGISTER, FACILITY and call control messages in DSS 1. Other supporting protocols may be added at a later date. The INAP (as a ROSE user) and the ROSE protocol have been specified using ASN.l. At present, the only standardized way to encode the resulting PDU

22、s is the basic encoding rules (see Recommendation X.690). The protocols should be defined in such a way that the functional entities defined in the INFM may be mapped into physical entities in any way that operators and manufacturers desire. 4 Evolutionary requirements The use of the application con

23、text negotiation mechanism (as defined in the Q.77-Series Recommendations) allows the two communicating entities to identify exactly what their capabilities (and therefore the capabilities required on the interface) are. Where possible, this should be used to allow evolution through capability sets.

24、 Capability sets should always be defined as supersets of previous capability sets to ensure successful interworking with previous capability sets is possible. This may not apply where errors are found in previous capability sets. Recommendation Q.1208 (09/97) 1 4.1 Rules for adding new parameters t

25、o INAJ? The objective of the rules is to achieve alignment and to avoid clashes between ITU-T CS-x and implementations based upon the regional standards that emanated from earlier versions of CS-x Recommendations. For network-specific parameters which are included in the Recommendations. context spe

26、cific tags will be used. Rules for context specific tagging are: I) Originally defined Q.128 tag values shall be maintained in subsequent capability sets. 2) In case parameters are removed from a defined Q. 12x8, the corresponding tag values remain reserved. 3) In case a regional defined parameter i

27、s adopted by the ITU-T, the regional defined tag values are also considered. 4) The following structure for tag value allocation shall be used: I I I Regional standard I I Q. 12 1 8 parameters I I I I adopted parameters f Future Capability Set use When a new data type is to be added to an existing s

28、equence of data types with an extension marker (. . .) and the new data type can be ignored when the receiving system is an implementation of an older INN version. the new data type shall be added at the end of the sequence, after the extension marker. When the new data type cannot be ignored, the n

29、ew data type shall be positioned before the extension marker, before the last mandatory parameter. The ITU-T shall allocate tag values starting from O upwards (as shown above). Regional bodies may then use tag values from 30 downwards for their additions to the Q.128 Recommendation. If the ITU-T ado

30、pts a parameter for INAP from such a regional standard, the tag value will also be adopted, in order to ensure compatibility. When ali tag values from 0 to 30 have been allocated between Q.128 and regional standards, tag allocation by the ITU-T will continue from 31 upwards. 4.2 Rules/guidelines for

31、 development of IN call party handling The information used to synchronize the SSF and SCF with the Connection View State should be as generic as possible, to allow flexibility. Allowing different operators to support differing transitions and priorities for feature interactions, thereby enabling co

32、mpetition. The IFS and IEs should specify the modified use of Legs and Call Segments by LegID and Call Segment ID. This also applies to commands initiated by the SCF, both bidirectional (class 1) and unidirectional (class 2) messages. These requirements also provide a flexible view to evolve to the

33、INBB-ISDN requirements being developed by the ITU-T, where the addition and removal of parties and bearers should be completely flexible. 2 Recommendation Q.1208 (09/97) Series A Series B Series C Series D Series E Series F Series G Series H Series I Series J Series K Series L Series M Series N Seri

34、es O Series P Series Q Series R Series S Series T Series U Series V Series X Series Y Series Z ITU-T RECOMMENDATIONS SERIES Organization of the work of the ITU-T Means of expression: definitions, symbols, classification General telecommunication statistics General tariff principles Overall network o

35、peration, telephone service, service operation and human factors Non-telephone telecommunication services Transmission systems and media, digital systems and networks Audiovisual and multimedia systems Integrated services digital network Transmission of television, sound programme and other multimed

36、ia signals Protection against interference Construction, installation and protection of cables and other elements of outside plant TMN and network maintenance: international transmission systems, telephone circuits, telegraphy, facsimile and leased circuits Maintenance: international sound programme

37、 and television transmission circuits Specifications of measuring equipment Telephone transmission quality, telephone installations, local line networks Switching and signalling Telegraph transmission Telegraph services terminal equipment Terminals for telematic services Telegraph switching Data communication over the telephone network Data networks and open system communications Global information infrastructure Programming languages Printed in Switzerland Geneva, 1998