FORD W-GS2-1999 RECESS ADJUSTABLE SNAP GAUGE FOR WORKPIECE TOLERANCE 0 5 AND ABOVE RANGE UP TO-286《工件公差测量用量程从0 5到286的凹槽式可调节卡规》.pdf

《FORD W-GS2-1999 RECESS ADJUSTABLE SNAP GAUGE FOR WORKPIECE TOLERANCE 0 5 AND ABOVE RANGE UP TO-286《工件公差测量用量程从0 5到286的凹槽式可调节卡规》.pdf》由会员分享，可在线阅读，更多相关《FORD W-GS2-1999 RECESS ADJUSTABLE SNAP GAUGE FOR WORKPIECE TOLERANCE 0 5 AND ABOVE RANGE UP TO-286《工件公差测量用量程从0 5到286的凹槽式可调节卡规》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、XXANVILLOCKING SCREWLOCKING NUTSEALED AFTER SETTINGLOCKING BUSHSECTION XXBRCRESTRAIGHTSIDESSTYLE 5BRCRERCBRERCBREBREDEXAMPLE OF FORD STANDARD PART NUMBERGS200440.50 39.50215.05.010.0D (Measuring Depth)RC (Corner Radius)B (Tip WIdth)No Go DimensionGo DimensionNational Standard Code(0=None, 1=ISO, 2=A

2、NSI,3=BSI, 4=DIN)0=Does Not Apply2=Adjustable TypeSTANDARDNUMBER:ISSUEDATE:REV:GLOBAL MANUFACTURING STANDARDSPURPOSE.wGS2RECESS ADJUSTABLE SNAP GAUGEFOR WORKPIECE TOLERANCE 0.5 AND ABOVERANGE UP TO286This standard is issued to list the Amendments to ASME B47.11988 (R1994).FOR ORDERING AN ADJUSTABLE GAP GAUGEFOR WORKPIECE 40 + 0.50, B = 15, RC = 5 on two sides, and D = 10DIMENSIONS IN mmPrinted copies are uncontrolled. G Sauging Standard nap GaugeSTYLE 1TRUERADIUSSTYLE 2RADIUS ONTWO SIDESSTYLE 3RIGHT HANDRADIUSSTYLE 4LEFT HANDRADIUSButton Style (6=Round, 7=Square)1 OF 119991201