EN ISP 10613-2-1996 en Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 2 LAN Subnetwork-Dependent Media-Ind.pdf

《EN ISP 10613-2-1996 en Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 2 LAN Subnetwork-Dependent Media-Ind.pdf》由会员分享，可在线阅读，更多相关《EN ISP 10613-2-1996 en Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 2 LAN Subnetwork-Dependent Media-Ind.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISP 10613-2:1997 Incorporating Amendment No.1 to BS ISO/IEC ISP10613-2:1994 (renumbers BS as BSENISP10613-2: 1997 Information technology International Standardized Profile RA Relaying the Connectionless-mode Network Service Part 2: LAN subnetwork-dependent, media-independent r

2、equirements The European Standard ENISP10613-2:1996 has the status of a BritishStandard ICS 35.100.05BSENISP10613-2:1997 This British Standard, having been prepared under the directionof the Information Systems Technology StandardsPolicy Committee,waspublished underthe authorityof the Standards Boar

3、dand comes intoeffecton 15January 1995 BSI 03-2000 The following BSI references relate to the work on this standard: Committee reference IST/6 Draft for comment92/68651DC ISBN 0 580 23671 4 Committees responsible for this BritishStandard The preparation of this British Standard was entrusted by the

4、Information Systems Technology Standards Policy Committee (IST/-) to Technical Committee IST/6, upon which the following bodies were represented: British Computer Society British Telecommunications plc CCTA (the Government Centre for Information Systems) Digital Equipment Co. Ltd. IBM United Kingdom

5、 Ltd. Institution of Electrical Engineers International Computers Limited Joint Information Systems Committee Logica UK Ltd. Nine Tiles Computer Systems Ltd. Rank Xerox Ltd. Amendments issued since publication Amd. No. Date Comments 9573 September 1997 Indicated by a sideline in the marginBSENISP106

6、13-2:1997 BSI 03-2000 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Foreword iii Text of ISO/IEC ISP10613-2 1BSENISP10613-2:1997 ii BSI 03-2000 National foreword This British Standard has been prepared by Technical Committee IST/6 and is the English langua

7、ge version of ENISP10613-2:1996 Information technology International Standardized Profile RA Relaying the Connectionless-mode Network Service Part2: LAN subnetwork-dependent, media-independent requirements, published by the European Committee for Standardization (CEN). It is identical with ISO/IEC I

8、SP10613-2:1994 published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It supersedes DDENV41801-2:1992, which is withdrawn. This British Standard is published under the direction of the Information Systems Technology Standards Po

9、licy Committee whose Technical Committee IST/6 has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European deve

10、lopments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, BSI,389 Chiswick High Road, London W44AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of British

11、 Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN ISP title page, page 2, ISO/IEC ISP title page,

12、 pages ii to iv, pages1 to4 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISP 10613-2 January 1996 ICS 35.100

13、 SupersedesENV41801-3:1992 Descriptors: Data processing, information interchange, network interconnection, open systems interconnection, local area networks, data transmission, communication procedure, control procedures, network layer, profiles. English version Information technology International

14、Standardized Profile RA Relaying the Connectionless-mode Network Service Part2:LAN subnetwork-dependent, media-independent requirements (ISO/IEC ISP10613-2:1994) Technologies de linformation Profil normalis international RA Relais de servicede rseau en mode sans connexion Partie2:Spcifications indpe

15、ndantes du milieu, dpendantes du sous-rseau LAN (ISO/IECISP10613-2:1994) This European Standard was approved by CEN on 1995-10-04. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stand

16、ard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other la

17、nguage made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Irela

18、nd, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 All rights of reproduction and c

19、ommunication in any form and by any means reserved in all countries to CEN and its members. Ref. No. EN ISP 10613-2:1996 EENISP10613-2:1996 BSI 03-2000 2 Foreword The text of the International Standard from ISO/IEC/JTC1, Information technology, of the International Organization for Standardization (

20、ISO) and the International Electrotechnical Commission (IEC) has been taken over as a European Standard by CEN Technical Board. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July1996, and confli

21、cting national standards shall be withdrawn at the latest by July1996. According to CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands,

22、Norway, Portugal, Spain, Sweden, Switzerland and the UnitedKingdom. NOTEEN ISP 10613-2 replaces ENV 41801-2:1992. For the time being, this document exists in the English version only.ISO/IEC ISP10613-2:1994(E) ii BSI 03-2000 Contents Page Foreword iii Introduction 1 1 Scope 1 2 Normative references

23、1 3 Definitions 2 4 Abbreviations 2 5 Requirements 2 5.1 Introduction 2 5.2 Static Conformance Requirements 2 5.3 Dynamic Conformance Requirements 2 Annex A (normative) ISPICS Requirements List 3 A.1 Introduction 3 A.2 Notation and Conventions 3 A.3 IPRL for ISO 8473 3 A.4 IPRL for ISO 9542 3 A.5 IP

24、RL for ISO 8802-2 4 Annex B (informative) Recommendations 4 B.1 Introduction 4 B.2 ISO 9542 Recommendations 4ISO/IEC ISP10613-2:1994(E) BSI 03-2000 iii Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized syste

25、m for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees col

26、laborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC1. In addition to develop

27、ing International Standards, ISO/IEC JTC1 has created a Special Group on Functional Standardization for the elaboration of International Standardized Profiles. An International Standardized Profile is an internationally agreed, harmonized document which identifies a standard or group of standards, t

28、ogether with options and parameters, necessary to accomplish a function or a set of functions. Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an International Standardized Profile requires approval by at least75% of the national bodies casting

29、a vote. International Standardized Profile ISO/IECISP10613-2 was prepared with the collaboration of Asia-Oceania Workshop (AOW); European Workshop for Open Systems (EWOS); Open Systems Environment Implementors Workshop (OIW). ISO/IEC ISP 10613 consists of several parts, under the general title Infor

30、mation technology International Standardized Profile RA Relaying the Connectionless-mode Network Service: Part 1: Subnetwork-independent requirements; Part 2: LAN subnetwork-dependent, media-independent requirements; Part 3: CSMA/CD LAN subnetwork-dependent, media-dependent requirements; Part 4: FDD

31、I LAN subnetwork-dependent, media-dependent requirements; Part 5: Definition of profile RA51.51, relaying the Connectionless-mode Network Service between CSMA/CD LAN subnetworks; Part 6: Definition of profile RA51.54, relaying the Connectionless-mode Network Service between CSMA/CD LAN subnetworks a

32、nd FDDI LAN subnetworks; Part 7: PSDN subnetwork-dependent, media-dependent requirements for virtual calls over a permanent access; Part 8: Definition of profile RA51.1111, relaying the Connectionless-mode Network Service between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a PSTN leas

33、ed line permanent access; Part 9: Definition of profile RA51.1121, relaying the Connectionless-mode Network Service between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access; Part 10: Token Ring LAN subnetwork-dependent, media-depende

34、nt requirements; Part 11: Definition of profile RA51.53, relaying the Connectionless-mode Network Service between CSMA/CD LAN subnetworks and Token Ring LAN subnetworks; Part 12: Definition of profile RA53.53, relaying the Connectionless-mode Network Service between Token Ring LAN subnetworks; Part

35、13: Definition of profile RA53.54, relaying the Connectionless-mode Network Service between Token Ring LAN subnetworks and FDDI LAN subnetworks;ISO/IEC ISP10613-2:1994(E) iv BSI 03-2000 Part 14: Definition of profile RA54.54, relaying the Connectionless-mode Network Service between FDDI LAN subnetwo

36、rks; Part 15: Definition of profile RA53.1111, relaying the Connectionless-mode Network Service between Token Ring LAN subnetworks and PSDNs using virtual calls over a PSTN leased line permanent access; Part 16: Definition of profile RA53.1121, relaying the Connectionless-mode Network Service betwee

37、n Token Ring LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access; Part 17: Definition of profile RA54.1111, relaying the Connectionless-mode Network Service between FDDI LAN subnetworks and PSDNs using virtual calls over a PSTN leased line perm

38、anent access; Part 18: Definition of profile RA54.1121, relaying the Connectionless-mode Network Service between FDDI LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access. Annex A forms an integral part of this part of ISO/IECISP10613. Annex B i

39、s for information only.ISO/IEC ISP10613-2:1994(E) BSI 03-2000 1 Introduction This International Standardized Profile (ISP) is defined in accordance with the principles specified by ISO/IEC Technical Report10000. The context of Functional Standardization is one area in the overall field of Informatio

40、n Technology (IT) standardization activities, covering base standards, profiles, and registration mechanisms. Aprofile defines a combination of base standards that collectively perform a specific well-defined IT function. Profiles standardize the use of options and other variations in the base stand

41、ards, and provide a basis for the development of uniform, internationally recognized system tests. ISPs are produced not simply to “legitimize” a particular choice of base standards and options, but to promote real system interoperability. One of the most important roles for an ISP is to serve as th

42、e basis for the development (by organizations other than ISO and IEC) of internationally recognized tests. The development and widespread acceptance of tests based on this and other ISPs is crucial to the successful realization of this goal. ISO/IEC ISP 10613 consists of several parts of which this

43、is part2. ISO/IECISP10613-1 specifiesthe profile requirements that are subnetwork-independent. There are further parts which specify subnetwork-dependent and media-dependent requirements. In addition, foreach individual profile there is a part of ISO/IECISP10613 which identifies the specific require

44、ments of that profile, making reference to appropriate material from part1 and from the subnetwork dependent parts of ISOIECISP10613. 1 Scope This International Standardized Profile is applicable to interworking units concerned with operating in the Open Systems Interconnection (OSI) environment. It

45、 specifies a combination of OSI base standards that collectively provide a Network Relay function for the connectionless-mode Network Service. This part of ISO/IECISP10613 specifies subnetwork-type dependent requirements applicable to an interworking unit attached to a LAN and using the ISO8802-2 LL

46、C type1 protocol, irrespective of the LAN medium. The operation of an interworking unit may involve relaying from onesubnetwork to another, and those subnetworks neednot be of the same type. This part of ISO/IECISP10613 applies only to communication over those subnetworks which are LANs using ISO880

47、2-2 LLC type1. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this International Standardized Profile. At the time of publication, the editions indicated were valid. All documents are subject to revision, and parties

48、to agreements based on this International Standardized Profile are warned against automatically applying any more recent editions of the documents listed below, since the nature of references made by ISPs to these documents is that they may be specific to a particular edition. Members of IEC and ISO

49、 maintain registers of currently valid International Standards and ISPs, and CCITT maintains published editions of its current Recommendations. ISO 8473:1988, Information processing systems Data communications Protocol for providing the connectionless-mode Network service. ISO 8473:1988/Corr.1:1992, Information processing systems Data communications Protocol for providing the connectionless-mode Network service Technical Corrigendum1. NOTEThis Technical Corrigendum to ISO8473 is to apply through