EN ISO 9692-1-2013 en Welding and allied processes - Types of joint preparation - Part 1 Manual metal arc welding gas-shielded metal arc welding gas welding TIG welding and beam we.pdf

《EN ISO 9692-1-2013 en Welding and allied processes - Types of joint preparation - Part 1 Manual metal arc welding gas-shielded metal arc welding gas welding TIG welding and beam we.pdf》由会员分享，可在线阅读，更多相关《EN ISO 9692-1-2013 en Welding and allied processes - Types of joint preparation - Part 1 Manual metal arc welding gas-shielded metal arc welding gas welding TIG welding and beam we.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN ISO 9692-1:2013W e l d i n g a n d a l l i e d p r o c e s s e s T y p e s o f j o i n t p r e p a r a t i o nPart 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steelsBS EN ISO 9692-1:2013 BRITISH STANDARDNati

2、onal forewordThis British Standard is the UK implementation of EN ISO9692-1:2013. It supersedes BS EN ISO 9692-1:2003 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee WEE/1, Definitions and symbols for welding.A list of organizations represented on this c

3、ommittee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 80106 8ICS 25.160

4、.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2013.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPIS

5、CHE NORM EN ISO 9692-1 September 2013 ICS 25.160.40 Supersedes EN ISO 9692-1:2003English Version Welding and allied processes - Types of joint preparation - Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013) Soudage

6、 et techniques connexes - Types de prparation de joints - Partie 1: Soudage manuel larc avec lectrode enrobe, soudage larc avec lectrode fusible sous protection gazeuse, soudage aux gaz, soudage TIG et soudage par faisceau des aciers (ISO 9692-1:2013) Schweien und verwandte Prozesse - Empfehlungen z

7、ur Schweinahtvorbereitung - Teil 1: Lichtbogenhandschweien, Schutzgasschweien, Gasschweien, WIG-Schweien und Strahlschweien von Sthlen (ISO 9692-1:2013) This European Standard was approved by CEN on 8 June 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulat

8、e the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Stan

9、dard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the nat

10、ional standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Sl

11、ovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any me

12、ans reserved worldwide for CEN national Members. Ref. No. EN ISO 9692-1:2013: EBS EN ISO 9692-1:2013EN ISO 9692-1:2013 (E) 3 Foreword This document (EN ISO 9692-1:2013) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes“ in collaboration with Technical Committee CEN/TC

13、121 “Welding and allied processes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2014, and conflicting national standards shall be withdrawn at the

14、 latest by March 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 9692-1:2003. According to the C

15、EN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hung

16、ary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 9692-1:2013 has been approved by CEN as EN ISO 9692-1:2013 without any

17、 modification. BS EN ISO 9692-1:2013ISO 9692-1:2013(E) ISO 2013 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Materials . 14 Welding processes 15 Finish 26 Type of joint preparation 2Bibliography .14BS EN ISO 9692-1:2013ISO 9692-1:2013(E)ForewordIS

18、O (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical co

19、mmittee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electro

20、technical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was draf

21、ted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directivesAttention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. D

22、etails of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patentsAny trade name used in this document is information given for the convenience of users and does not constitute an endor

23、sement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee respons

24、ible for this document is ISO/TC 44, Welding and allied processes, Subcommittee SC 7, Representation and terms.This second edition of ISO 9692-1 cancels and replaces ISO 9692-1:2003, which has been technically revised.ISO 9692 consists of the following parts, under the general title Welding and alli

25、ed processes Types of joint preparation: Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding, and beam welding of steels Part 2: Submerged arc welding of steels Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys Part 4: C

26、lad steelsiv ISO 2013 All rights reservedBS EN ISO 9692-1:2013ISO 9692-1:2013(E)IntroductionThis part of ISO 9692 defines the parameters characterizing the joint preparation and the collection of frequently recurring values and shapes.The specifications given in this part of ISO 9692 have been compi

27、led on the basis of experience and contain dimensions for types of joint preparation that are generally found to lead to suitable welding conditions. However, the extended field of application makes it necessary to give a range of dimensions. The dimension ranges specified represent design limits an

28、d are not tolerances for manufacturing purposes. Manufacturing limits depend, for instance, on welding process, parent metal, welding position, and quality level. Because of the common character of this part of ISO 9692, the examples given cannot be regarded as the only solution for the selection of

29、 a joint type.Specific fields of application and manufacturing requirements (e.g. pipeline construction) may be covered by selected ranges specified in other standards adapted from this basic part of ISO 9692.Requests for official interpretations of any aspect of this part of ISO 9692 should be dire

30、cted to the Secretariat of ISO/TC 44/SC 7 via your national standards body. A complete listing of these bodies can be found at www.iso.org. ISO 2013 All rights reserved vBS EN ISO 9692-1:2013BS EN ISO 9692-1:2013Welding and allied processes Types of joint preparation Part 1: Manual metal arc welding

31、, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels1 ScopeThis part of ISO 9692 specifies types of joint preparation for manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding, and beam welding of steel (see Clauses 3 and 4).It applies to

32、 joint preparation for full penetration butt welds and for fillet welds. For partial penetration butt welds, types of joint preparation and dimensions differing from those specified in this part of ISO 9692 may be stipulated.The root gaps referred to in this part of ISO 9692 are those gaps presented

33、 after tack welding, if used.Consideration is given to altering the joint preparation details (where appropriate) to facilitate temporary backing, “one-sided welding,” etc.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispen

34、sable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 6947, Welding and allied processes Welding positions3 MaterialsJoint preparations recommended in this part of

35、ISO 9692 are suitable for all kinds of steel.4 Welding processesJoint preparations recommended in this part of ISO 9692 are suitable for welding carried out in accordance with the following processes as specified in Tables 1 to 4 (combinations of different processes are possible):a) (3) gas welding;

36、 oxyfuel gas welding;b) (111) manual metal arc welding (metal arc welding with covered electrode); shielded metal arc welding;c) (13) gas-shielded metal arc welding; gas metal arc welding includes: (131) MIG welding with solid wire electrode; gas metal arc welding using inert gas and solid wire elec

37、trode; (132) MIG welding with flux cored electrode; flux cored arc welding; (133) MIG welding with metal cored electrode; gas metal arc welding using inert gas and metal cored wire;INTERNATIONAL STANDARD ISO 9692-1:2013(E) ISO 2013 All rights reserved 1BS EN ISO 9692-1:2013ISO 9692-1:2013(E) (135) M

38、AG welding with solid wire electrode; gas metal arc welding using active gas and solid wire electrode; (136) MAG welding with flux cored electrode; gas metal arc welding using active gas and flux cored electrode; (138) MAG welding with metal cored electrode; gas metal arc welding using active gas an

39、d metal cored electrode;d) (141) TIG welding with solid filler material (wire/rod); gas tungsten arc welding using inert gas and solid filler material (wire/rod);e) (5) beam welding: (51) electron beam welding; (512) electron beam welding in atmosphere; (52) laser welding; laser beam welding.NOTE Th

40、e numbers in parentheses refer to the reference number of the welding process specified in ISO 4063.25 FinishThe longitudinal edges of the root face should be de-burred and may be chamfered (up to 2 mm).6 Type of joint preparationThe recommended types of joint preparation and dimensions are specifie

41、d in Tables 1 to 4.2 ISO 2013 All rights reservedBS EN ISO 9692-1:2013ISO 9692-1:2013(E)Table1 Joint preparations for butt welds, welded from one sideRef. No.Material thicknesstmmType of prepara-tionSymbol(in accordance with ISO25531)Cross-sectionDimensionsRecommended weldingprocess(referenceNo. in

42、accord-ance with ISO40632)WeldillustrationRemarksAnglea, GapbbmmThickness of root facecmmDepth of prepara-tionhmm1.12Raisededges3 111141512Usuallywithoutfillermetal1.2.14Squarepreparationt3 1111411.2.23 16Steep-flankedsingle-Vpreparation5 205 b 1511113With backing strip1.55 t 40Single-Vpreparationwi

43、th broad root face 601 b 42 c 4111131411.612Single-Uprepara-tion with V roote60 908 121 b 34111131416 R 91.712Single-Vpreparationwith V roote60 9010 152 b 4 211113141Table1 (continued)4 ISO 2013 All rights reservedBS EN ISO 9692-1:2013ISO 9692-1:2013(E)Ref. No.Material thicknesstmmType of prepara-ti

44、onSymbol(in accordance with ISO25531)Cross-sectionDimensionsRecommended weldingprocess(referenceNo. in accord-ance with ISO40632)WeldillustrationRemarksAnglea, GapbbmmThickness of root facecmmDepth of prepara-tionhmm1.812Single-Uprepara-tion8 1243111131411.9.13 16Steep-flankedsingle-bevelprepa-ratio

45、n15 606 b 12111With backing strip1213141Table1 (continued) ISO 2013 All rights reserved 5BS EN ISO 9692-1:2013ISO 9692-1:2013(E)Ref. No.Material thicknesstmmType of prepara-tionSymbol(in accordance with ISO25531)Cross-sectionDimensionsRecommended weldingprocess(referenceNo. in accord-ance with ISO40

46、632)WeldillustrationRemarksAnglea, GapbbmmThickness of root facecmmDepth of prepara-tionhmm1.1116Single-Jpreparation10 202 b 41 c 2111131411.1215Squarepreparatione52100511.1315Squarepreparatione5210051a Angles are also larger and/or asymmetric for welding in position PC according to ISO 6947 (horizo

47、ntal position).b Dimensions given apply to the tacked condition.c The indication of the welding process does not mean that it is applicable for the whole range of workpiece thicknesses.d With filler metal.e Symbol and number not yet standardized in ISO 2553:1992.1Table1 (continued)6 ISO 2013 All rig

48、hts reservedBS EN ISO 9692-1:2013ISO 9692-1:2013(E)Table2 Joint preparations for butt welds, welded from both sidesRef. NoMaterial thicknesstmmType of preparationSymbol(inaccord-ance with ISO25531)Cross-sectionDimensionsRecommen-ded welding process(reference No. in accord-ance with ISO40632)Weldillu

49、strationRemarksAnglea, GapbbmmThickness of root facecmmDepth of preparationhmm2.18Squareprepa-rationt/2111141t2()13150522.23 t 40Single-Vpreparation 6032111141Back run is indicated.40 60132.310Single-Vpreparationwith broad root face 601 b 32 c 4111141In special cases, also possible for smaller work piece thicknessesandwelding proc