EN ISO 6507-4-2005 en Metallic materials - Vickers hardness test - Part 4 Tables and hardness values《金属材料 硬度试验 第4部分 硬度数值表 ISO 6507-4-2005》.pdf

《EN ISO 6507-4-2005 en Metallic materials - Vickers hardness test - Part 4 Tables and hardness values《金属材料 硬度试验 第4部分 硬度数值表 ISO 6507-4-2005》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 6507-4-2005 en Metallic materials - Vickers hardness test - Part 4 Tables and hardness values《金属材料 硬度试验 第4部分 硬度数值表 ISO 6507-4-2005》.pdf（92页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN ISO 6507-4:2005Metallic materials Vickers hardness testsPart 4: Tables of hardness valuesThe European Standard EN ISO 6507-4:2005 has the status of a British StandardICS 77.040.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g4

2、0g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN ISO 6507-4:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 January 2006 BSI 30 January 2006ISBN 0 580 47589 1National forewordTh

3、is British Standard is the official English language version of EN ISO 6507-4:2005. It is identical with ISO 6507-4:2005.The UK participation in its preparation was entrusted by Technical Committee ISE/NFE/4, Mechanical testing of metals, to Subcommittee ISE/NFE/4/5, Indentation hardness testing, wh

4、ich has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them i

5、n the UK.A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “Intern

6、ational Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a Brit

7、ish Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to iv, pages 1 to 82, an inside back cover and a back cover.The BSI copyr

8、ight notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 6507-4December 2005ICS 77.040.10English VersionMetallic materials - Vickers hardness test - Part 4: Tables

9、 andhardness values (ISO 6507-4:2005)Matriaux mtalliques - Essai de duret Vickers - Partie 4:Tableaux des valeurs de duret (ISO 6507-4:2005)Metallische Werkstoffe - Hrteprfung nach Vickers - Teil4: Tabellen zur Bestimmung der Hrtewerte (ISO 6507-4:2005)This European Standard was approved by CEN on 1

10、4 December 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be

11、 obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central S

12、ecretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Po

13、rtugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedw

14、orldwide for CEN national Members.Ref. No. EN ISO 6507-4:2005: EForeword This document (EN ISO 6507-4:2005) has been prepared by Technical Committee ISO/TC 164 “Mechanical testing of metals“ in collaboration with Technical Committee ECISS/TC 1 “Steel - Mechanical testing“, the secretariat of which i

15、s held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting national standards shall be withdrawn at the latest by June 2006. According to the CEN/CENELEC Internal

16、Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherland

17、s, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 6507-4:2005 has been approved by CEN as EN ISO 6507-4:2005 without any modifications. EN ISO 6507-4:2005Reference numberISO 6507-4:2005(E)INTERNATIONAL STANDARD ISO6507-

18、4First edition2005-12-15Metallic materials Vickers hardness test Part 4: Tables of hardness values Matriaux mtalliques Essai de duret Vickers Partie 4: Tableaux des valeurs de duret EN ISO 6507-4:2005ii iiiContents Page Foreword iv 1 Scope . 1 2 Tables of Vickers hardness values for use in tests mad

19、e on flat surfaces 1 EN ISO 6507-4:2005iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member

20、body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electr

21、otechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted

22、 by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

23、rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 6507-4 was prepared by Technical Committee ISO/TC 164, Mechanical testing of metals, Subcommittee SC 3, Hardness testing. This first edition cancels and replaces Annexes B, C and D of ISO 6507-1:1997. ISO 65

24、07 consists of the following parts, under the general title Metallic materials Vickers hardness test: Part 1: Test method Part 2: Verification and calibration of testing machines Part 3: Calibration of reference blocks Part 4: Tables of hardness values EN ISO 6507-4:20051Metallic materials Vickers h

25、ardness test Part 4: Tables of hardness values 1 Scope This part of ISO 6507 gives tables of Vickers hardness for use in tests made on flat surfaces. 2 Tables of Vickers hardness values for use in tests made on flat surfaces See Table 1 for range HV 0,2. See Table 2 for range HV 0,2 to HV 3. See Tab

26、le 3 for range HV 5 to HV 100. Table 1 Range HV 0,2 Test force, F N 0,009 807 0,019 61 0,049 03 0,098 07 0,196 12 0,245 2 0,490 3 0,980 7 Vickers hardness Mean diagonal of indentation d mm HV 0,001 HV 0,002 HV 0,005 HV 0,01 HV 0,02 HV 0,025 HV 0,05 HV 0,1 0,020 0 0,020 2 0,020 4 0,020 6 0,020 8 4,64

27、 4,54 4,46 4,37 4,29 9,27 9,09 8,91 8,74 8,57 23,18 22,72 22,28 21,85 21,43 46,36 45,45 44,56 43,70 42,86 92,72 90,89 89,12 87,39 85,72 115,9 113,6 111,4 109,3 107,2 231,8 227,2 222,8 218,5 214,3 463,6 454,5 445,6 437,0 428,6 0,021 0 0,021 2 0,021 4 0,021 6 0,021 8 4,21 4,13 4,05 3,97 3,90 8,41 8,25

28、 8,10 7,95 7,80 21,02 20,63 20,25 19,87 19,51 42,05 41,26 40,49 39,75 39,02 84,10 82,52 80,98 79,49 78,04 105,1 103,2 101,2 99,38 97,57 210,2 206,3 202,5 198,7 195,1 420,5 412,6 404,9 397,5 390,2 0,022 0 0,022 2 0,022 4 0,022 6 0,022 8 3,83 3,76 3,70 3,63 3,57 7,66 7,52 7,39 7,26 7,13 19,16 18,81 18

29、,48 18,15 17,84 38,32 37,63 36,96 36,31 35,67 76,62 75,25 73,91 72,61 71,34 95,80 94,08 92,41 90,78 89,20 191,6 188,1 184,8 181,5 178,4 383,2 376,3 369,6 363,1 356,7 0,023 0 0,023 2 0,023 4 0,023 6 0,023 8 3,51 3,45 3,39 3,33 3,27 7,01 6,89 6,77 6,66 6,55 17,53 17,23 16,93 16,65 16,37 35,06 34,45 33

30、,87 33,30 32,74 70,11 68,90 67,73 66,59 65,47 87,65 86,15 84,68 83,25 81,86 175,3 172,3 169,3 166,5 163,7 350,6 344,5 338,7 333,0 327,4 EN ISO 6507-4:20052 Table 1 (continued) Test force, F N 0,009 807 0,019 61 0,049 03 0,098 07 0,196 12 0,245 2 0,490 3 0,980 7 Vickers hardness Mean diagonal of inde

31、ntation d mm HV 0,001 HV 0,002 HV 0,005 HV 0,01 HV 0,02 HV 0,025 HV 0,05 HV 0,1 0,024 0 0,024 2 0,024 4 0,024 6 0,024 8 3,22 3,17 3,11 3,06 3,02 6,44 6,33 6,23 6,13 6,03 16,10 15,83 15,57 15,32 15,07 32,20 31,67 31,15 30,64 30,15 64,39 63,33 62,29 61,28 60,30 80,50 79,17 77,88 76,62 75,39 161,0 158,

32、3 155,7 153,2 150,7 322,0 316,7 311,5 306,4 301,5 0,025 0 0,025 2 0,025 4 0,025 6 0,025 8 2,97 2,92 2,87 2,83 2,79 5,93 5,84 5,75 5,66 5,57 14,83 14,60 14,37 14,15 13,93 29,67 29,20 28,74 28,30 27,86 59,34 58,40 57,48 56,59 55,72 74,19 73,01 71,87 70,75 69,66 148,3 146,0 143,7 141,5 139,3 296,7 292,

33、0 287,4 283,0 278,6 0,026 0 0,026 2 0,026 4 0,026 6 0,026 8 2,74 2,70 2,66 2,62 2,58 5,49 5,40 5,32 5,24 5,16 13,72 13,51 13,30 13,10 12,91 27,43 27,02 26,61 26,21 25,82 54,86 54,03 53,21 52,41 51,63 68,59 67,55 66,53 65,53 64,56 137,2 135,1 133,0 131,0 129,1 274,3 270,2 266,1 262,1 258,2 0,027 0 0,

34、027 2 0,027 4 0,027 6 0,027 8 2,54 2,51 2,47 2,43 2,40 5,09 5,01 4,94 4,87 4,80 12,72 12,53 12,35 12,17 12,00 25,44 25,07 24,70 24,34 24,00 50,87 50,13 49,40 48,69 47,99 63,60 62,67 61,76 60,87 60,00 127,2 125,3 123,5 121,7 120,0 254,4 250,7 247,0 243,4 240,0 0,028 0 0,028 2 0,028 4 0,028 6 0,028 8

35、2,37 2,33 2,30 2,27 2,24 4,73 4,66 4,60 4,53 4,47 11,83 11,66 11,50 11,33 11,18 23,65 23,32 22,99 22,67 22,36 47,30 46,64 45,98 45,34 44,71 59,14 58,31 57,49 56,69 55,90 118,3 116,6 115,0 113,3 111,8 236,5 233,2 229,9 226,7 223,6 0,029 0 0,029 2 0,029 4 0,029 6 0,029 8 2,21 2,18 2,15 2,12 2,09 4,41

36、4,35 4,29 4,23 4,18 11,02 10,87 10,73 10,58 10,44 22,05 21,75 21,46 21,17 20,88 44,10 43,50 42,91 42,33 41,76 55,13 54,38 53,64 52,92 52,21 110,2 108,7 107,3 105,8 104,4 220,5 217,5 214,6 211,7 208,8 0,030 0 0,030 2 0,030 4 0,030 6 0,030 8 2,06 2,03 2,01 1,98 1,95 4,12 4,07 4,01 3,96 3,91 10,30 10,1

37、7 10,03 9,90 9,77 20,61 20,33 20,07 19,81 19,55 41,21 40,66 40,13 39,61 39,09 51,52 50,84 50,17 49,52 48,88 103,0 101,7 100,3 99,02 97,74 206,1 203,3 200,7 198,1 195,5 0,031 0 0,031 2 0,031 4 0,031 6 0,031 8 1,93 1,91 1,88 1,86 1,83 3,86 3,81 3,76 3,71 3,67 9,65 9,52 9,40 9,28 9,17 19,30 19,05 18,81

38、 18,57 18,34 38,59 38,10 37,61 37,14 36,67 48,25 47,63 47,03 46,43 45,85 96,48 95,25 94,04 92,85 91,69 193,0 190,5 188,1 185,7 183,4 0,032 0 0,032 2 0,032 4 0,032 6 0,032 8 1,81 1,79 1,77 1,74 1,72 3,62 3,58 3,53 3,49 3,45 9,05 8,94 8,83 8,72 8,62 18,11 17,89 17,67 17,45 17,24 36,22 35,77 35,33 34,9

39、0 34,47 45,28 44,72 44,17 43,63 43,10 90,54 89,42 88,32 87,24 86,18 181,1 178,9 176,7 174,5 172,4 0,033 0 0,033 2 0,033 4 0,033 6 0,033 8 1,70 1,68 1,66 1,64 1,62 3,41 3,36 3,32 3,28 3,25 8,51 8,41 8,31 8,21 8,12 17,03 16,82 16,62 16,43 16,23 34,06 33,65 33,24 32,85 32,46 42,58 42,07 41,56 41,07 40,

40、59 85,14 84,12 83,11 82,12 81,16 170,3 168,2 166,2 164,3 162,3 EN ISO 6507-4:20053Table 1 (continued) Test force, F N 0,009 807 0,019 61 0,049 03 0,098 07 0,196 12 0,245 2 0,490 3 0,980 7 Vickers hardness Mean diagonal of indentation d mm HV 0,001 HV 0,002 HV 0,005 HV 0,01 HV 0,02 HV 0,025 HV 0,05 H

41、V 0,1 0,034 0 0,034 2 0,034 4 0,034 6 0,034 8 1,60 1,59 1,57 1,55 1,53 3,21 3,17 3,13 3,10 3,06 8,02 7,93 7,83 7,74 7,66 16,04 15,86 15,67 15,49 15,31 32,08 31,71 31,34 30,98 30,62 40,11 39,64 39,18 38,73 38,29 80,20 79,27 78,35 77,45 76,56 160,4 158,6 156,7 154,9 153,1 0,035 0 0,035 2 0,035 4 0,035

42、 6 0,035 8 1,51 1,50 1,48 1,46 1,45 3,03 2,99 2,96 2,93 2,89 7,57 7,48 7,40 7,32 7,23 15,14 14,97 14,80 14,63 14,47 30,27 29,93 29,59 29,26 28,94 37,85 37,42 37,00 36,59 36,18 75,69 74,83 73,99 73,16 72,34 151,4 149,7 148,0 146,3 144,7 0,036 0 0,036 2 0,036 4 0,036 6 0,036 8 1,43 1,42 1,40 1,38 1,37

43、 2,86 2,83 2,80 2,77 2,74 7,15 7,08 7,00 6,92 6,85 14,31 14,15 14,00 13,84 13,69 28,62 28,30 27,99 27,69 27,39 35,78 35,38 35,00 34,61 34,24 71,54 70,75 69,98 69,21 68,46 143,1 141,5 140,0 138,4 136,9 0,037 0 0,037 2 0,037 4 0,037 6 0,037 8 1,35 1,34 1,33 1,31 1,30 2,71 2,68 2,65 2,62 2,60 6,77 6,70

44、 6,63 6,56 6,49 13,55 13,40 13,26 13,12 12,98 27,09 26,80 26,51 26,23 25,96 33,87 33,51 33,15 32,80 32,45 67,73 67,00 66,28 65,58 64,89 135,5 134,0 132,6 131,2 129,8 0,038 0 0,038 2 0,038 4 0,038 6 0,038 8 1,28 1,27 1,26 1,24 1,23 2,57 2,54 2,51 2,49 2,46 6,42 6,35 6,29 6,22 6,16 12,84 12,71 12,58 1

45、2,45 12,32 25,68 25,41 25,15 24,89 24,63 32,11 31,77 31,44 31,12 30,80 64,21 63,54 62,88 62,23 61,59 128,4 127,1 125,8 124,5 123,2 0,039 0 0,039 2 0,039 4 0,039 6 0,039 8 1,22 1,21 1,19 1,18 1,17 2,44 2,41 2,39 2,36 2,34 6,10 6,03 5,97 5,91 5,85 12,19 12,07 11,95 11,83 11,71 24,38 24,13 23,89 23,65

46、23,41 30,48 30,17 29,87 29,57 29,27 60,96 60,34 59,73 59,12 58,53 121,9 120,7 119,5 118,3 117,1 0,040 0 0,040 2 0,040 4 0,040 6 0,040 8 1,16 1,15 1,14 1,13 1,11 2,32 2,29 2,27 2,25 2,23 5,79 5,74 5,68 5,62 5,57 11,59 11,48 11,36 11,25 11,14 23,18 22,95 22,72 22,50 22,28 28,98 28,69 28,41 28,13 27,85

47、 57,95 57,37 56,81 56,25 55,70 115,9 114,8 113,6 112,5 111,4 0,041 0 0,041 2 0,041 4 0,041 6 0,041 8 1,10 1,09 1,08 1,07 1,06 2,21 2,18 2,16 2,14 2,12 5,52 5,46 5,41 5,36 5,31 11,03 10,93 10,82 10,72 10,61 22,06 21,85 21,64 21,43 21,23 27,58 27,32 27,05 26,79 26,54 55,16 54,62 54,09 53,58 53,06 110,

48、3 109,3 108,2 107,2 106,1 0,042 0 0,042 2 0,042 4 0,042 6 0,042 8 1,05 1,04 1,03 1,02 1,01 2,10 2,08 2,06 2,04 2,02 5,26 5,21 5,16 5,11 5,06 10,51 10,41 10,32 10,22 10,12 21,02 20,83 20,63 20,44 20,25 26,29 26,04 25,79 25,55 25,31 52,56 52,06 51,57 51,09 50,61 105,1 104,1 103,2 102,2 101,2 0,043 0 0

49、,043 2 0,043 4 0,043 6 0,043 8 1,00 2,01 1,99 1,97 1,95 1,93 5,01 4,97 4,92 4,88 4,83 10,03 9,94 9,85 9,76 9,67 20,06 19,87 19,69 19,51 19,33 25,08 24,85 24,62 24,39 24,17 50,14 49,68 49,22 48,77 48,33 100,3 99,37 98,46 97,56 96,67 EN ISO 6507-4:20054 Table 1 (continued) Test force, F N 0,009 807 0,019 61 0,049 03 0,098 07 0,196 12 0,245 2 0,490 3 0,980 7 Vickers hardness Mean diagonal of indentation d mm HV 0,001 HV 0,002 HV 0,005 HV 0,01 HV 0,02 HV 0,025 HV 0,05 HV 0,1 0,044 0 0,044 2 0,044 4 0,044 6 0,044 8 1,92 1,90 1,88 1