EN 62146-1-2014 en Grading capacitors for high-voltage alternating current circuit-breakers - Part 1 General (Incorporates Amendment A1 2016).pdf

《EN 62146-1-2014 en Grading capacitors for high-voltage alternating current circuit-breakers - Part 1 General (Incorporates Amendment A1 2016).pdf》由会员分享，可在线阅读，更多相关《EN 62146-1-2014 en Grading capacitors for high-voltage alternating current circuit-breakers - Part 1 General (Incorporates Amendment A1 2016).pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、Grading capacitors for high-voltage alternating current circuit-breakersPart 1: General (IEC 62146-1:2013)BS EN 62146-1:2014BS EN 62146-1:2014+A1:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD EN 62146-1 NORME EUROPENNE EUROPISCHE NORM March 20

2、14 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2014 CENELEC - All rights of exploitation in any form and by any mean

3、s reserved worldwide for CENELEC members. Ref. No. EN 62146-1:2014 E ICS 31.060.01; 31.060.70 English version Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General (IEC 62146-1:2013) Condensateurs de rpartition pour disjoncteurs courant alternatif haute tension -

4、 Partie 1: Gnralits (CEI 62146-1:2013) Spannungsausgleichskondensatoren fr Hochspannungs-Wechselstrom-Leistungsschalter - Teiln 1: Allgemeines (IEC 62146-1:2013) This European Standard was approved by CENELEC on 2013-10-30. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulation

5、s which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member

6、. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

7、 CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Net

8、herlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62146-1:2014BS EN 62146-1:2014+A1:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 62146-1:2014+A1:2016. It is identical to IEC

9、62146-1:2013, incorporating amendment 1:2016. It supersedes BS EN 62146-1:2014 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by

10、IEC amendment 1 is indicated by .The UK participation in its preparation was entrusted to Technical Committee PEL/33, Power capacitors.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary prov

11、isions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 89446 6ICS 31.060.01; 31.060.70Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard

12、 was published under the authority of the Standards Policy and Strategy Committee on 31 March 2014.Amendments/corrigenda issued since publicationDate Text affected30 November 2016 Implementation of IEC amendment 1:2016 with CENELEC endorsement A1:2016EUROPEAN STANDARD EN 62146-1 NORME EUROPENNE EURO

13、PISCHE NORM March 2014 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2014 CENELEC - All rights of exploitation in any

14、form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62146-1:2014 E ICS 31.060.01; 31.060.70 English version Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General (IEC 62146-1:2013) Condensateurs de rpartition pour disjoncteurs courant altern

15、atif haute tension - Partie 1: Gnralits (CEI 62146-1:2013) Spannungsausgleichskondensatoren fr Hochspannungs-Wechselstrom-Leistungsschalter - Teiln 1: Allgemeines (IEC 62146-1:2013) This European Standard was approved by CENELEC on 2013-10-30. CENELEC members are bound to comply with the CEN/CENELEC

16、 Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or t

17、o any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as th

18、e official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxemb

19、ourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62146-1:2014EN 62146-1:2014+A1October 2016- 3 - EN 62146-1:2014 Annex ZA (normative) Normative references to international publications with their cor

20、responding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including

21、 any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year CISPR 18-2 1986 Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2

22、: Methods of measurement and procedure for determining limits - - IEC Guide 109 Environmental aspects - Inclusion in electrotechnical product standards - - IEC 60050 (Series) International Electrotechnical Vocabulary (IEV) - - IEC 60060-1 2010 High-voltage test techniques - Part 1: General definitio

23、ns and test requirements EN 60060-1 2010 IEC 60068-2-17 1994 Environmental testing - Part 2: Tests - Test Q: Sealing EN 60068-2-17 1994 IEC 60071-1 2006 Insulation co-ordination - Part 1: Definitions, principles and rules EN 60071-1 2006 IEC 60270 + corr. October 2000 2001 High-voltage test techniqu

24、es - Partial discharge measurements EN 60270 2001 IEC 60376 2005 Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment EN 60376 2005 IEC 60507 1991 Artificial pollution tests on high-voltage insulators to be used on a.c. systems EN 60507 1993 IEC 60567 2011 Oil-f

25、illed electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance EN 60567 2011 IEC 60721-1 + A1 + A2 1990 1992 1995 Classification of environmental conditions - Part 1: Environmental parameters and their severities EN 60721-1 - + A21) 1995 - 1995 IEC/TS 60815 (serie

26、s) Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - - IEC 61462 2007 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance c

27、riteria and design recommendations EN 61462 2007 1) EN 60721-1 includes A1 to IEC 60721-1. BS EN 62146-1:2014EN 62146-1:2014/A1:2016 2 European foreword The text of document 33/583/FDIS, future IEC 62146-1:2013/A1, prepared by IEC/TC 33 “Power capacitors and their applications” was submitted to the

28、IEC-CENELEC parallel vote and approved by CENELEC as EN 62146-1:2014/A1:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-04-28 latest date by which the national

29、 standards conflicting with the document have to be withdrawn (dow) 2019-07-28 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorse

30、ment notice The text of the International Standard IEC 62146-1:2013/A1:2016 was approved by CENELEC as a European Standard without any modification. EN 62146-1:2014 - 2 - Foreword The text of document 33/535/FDIS, future edition 1 of IEC 62146-1, prepared by IEC/TC 33, “Power capacitors and their ap

31、plications“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62146-1:2014. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-09-14 latest d

32、ate by which the national standards conflicting with the document have to be withdrawn (dow) 2016-10-30 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all su

33、ch patent rights. Endorsement notice The text of the International Standard IEC 62146-1:2013 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-2-11 NOTE Harmo

34、nized as EN 60068-2-11 IEC 60068-2-42 NOTE Harmonized in EN 60068-2-42 BS EN 62146-1:2014Foreword to amendment A1BS EN 62146-1:2014+A1:2016EN 62146-1:2014+A1:2016 2 - 3 - EN 62146-1:2014 Annex ZA (normative) Normative references to international publications with their corresponding European publica

35、tions The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. N

36、OTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year CISPR 18-2 1986 Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement an

37、d procedure for determining limits - - IEC Guide 109 Environmental aspects - Inclusion in electrotechnical product standards - - IEC 60050 (Series) International Electrotechnical Vocabulary (IEV) - - IEC 60060-1 2010 High-voltage test techniques - Part 1: General definitions and test requirements EN

38、 60060-1 2010 IEC 60068-2-17 1994 Environmental testing - Part 2: Tests - Test Q: Sealing EN 60068-2-17 1994 IEC 60071-1 2006 Insulation co-ordination - Part 1: Definitions, principles and rules EN 60071-1 2006 IEC 60270 + corr. October 2000 2001 High-voltage test techniques - Partial discharge meas

39、urements EN 60270 2001 IEC 60376 2005 Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment EN 60376 2005 IEC 60507 1991 Artificial pollution tests on high-voltage insulators to be used on a.c. systems EN 60507 1993 IEC 60567 2011 Oil-filled electrical equipment

40、- Sampling of gases and analysis of free and dissolved gases - Guidance EN 60567 2011 IEC 60721-1 + A1 + A2 1990 1992 1995 Classification of environmental conditions - Part 1: Environmental parameters and their severities EN 60721-1 - + A21) 1995 - 1995 IEC/TS 60815 (series) Selection and dimensioni

41、ng of high-voltage insulators intended for use in polluted conditions - - IEC 61462 2007 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommen

42、dations EN 61462 2007 1) EN 60721-1 includes A1 to IEC 60721-1. BS EN 62146-1:2014EN 62146-1:2014/A1:2016 2 European foreword The text of document 33/583/FDIS, future IEC 62146-1:2013/A1, prepared by IEC/TC 33 “Power capacitors and their applications” was submitted to the IEC-CENELEC parallel vote a

43、nd approved by CENELEC as EN 62146-1:2014/A1:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-04-28 latest date by which the national standards conflicting with

44、 the document have to be withdrawn (dow) 2019-07-28 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the

45、 International Standard IEC 62146-1:2013/A1:2016 was approved by CENELEC as a European Standard without any modification. EN 62146-1:2014 - 2 - Foreword The text of document 33/535/FDIS, future edition 1 of IEC 62146-1, prepared by IEC/TC 33, “Power capacitors and their applications“ was submitted t

46、o the IEC-CENELEC parallel vote and approved by CENELEC as EN 62146-1:2014. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-09-14 latest date by which the national s

47、tandards conflicting with the document have to be withdrawn (dow) 2016-10-30 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorseme

48、nt notice The text of the International Standard IEC 62146-1:2013 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-2-11 NOTE Harmonized as EN 60068-2-11 IEC

49、60068-2-42 NOTE Harmonized in EN 60068-2-42 BS EN 62146-1:2014BS EN 62146-1:2014+A1:2016EN 62146-1:2014+A1:2016 3 EN 62146-1:2014 - 4 - IEC 62155 (mod) 2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V EN 62155 2003 IEC 62271-1 2007 High-voltage switchgear and controlgear - Part 1: Common specifications EN 62271-1 2008 IEC 62271-100 2008 High-voltage switchgear and controlgear - Part 100: Alternating current circuit-breakers EN 6227