EN 61753-071-2-2014 en Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2 Non-connectorized singlemode fibre optic 1 2 and 2 2 spatial s.pdf

《EN 61753-071-2-2014 en Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2 Non-connectorized singlemode fibre optic 1 2 and 2 2 spatial s.pdf》由会员分享，可在线阅读，更多相关《EN 61753-071-2-2014 en Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2 Non-connectorized singlemode fibre optic 1 2 and 2 2 spatial s.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationFibre optic interconnecting devices and passive components Performance standardPart 071-2: Non-connectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C Controlled environmentsBS EN 61753-071-2:2014National forewordThis British Standard is the UK

2、implementation of EN 61753-071-2:2014. Itis identical to IEC 61753-071-2:2014.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of organizations represented on t

3、his committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 71132 9ICS

4、33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61753

5、-071-2:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61753-071-2 July 2014 ICS 33.180.20 English Version Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized single-mode fibre optic 1 2 and 2 2 spatial switches for category C -

6、Controlled environments (IEC 61753-071-2:2014) Dispositifs dinterconnexion et composants passifs fibres optiques - Norme de performance - Partie 071-2: Commutateurs spatiaux optiques unimodaux 1 2 et 2 2 non connectoriss pour la catgorie C - Environnements contrls (CEI 61753-071-2:2014) Lichtwellenl

7、eiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 071-2: Nicht mit Steckverbindern versehene rumliche 1 x 2 und 2 x 2 Einmodenschalter fr die Kategorie C - Kontrollierte Umgebung (IEC 61753-071-2:2014) This European Standard was approved by CENELEC on 2014-06-17. CENELEC me

8、mbers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applica

9、tion to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENEL

10、EC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icel

11、and, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europi

12、sches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61753-071-2:2014 E BS EN 61753-071-2:2014EN 61753-071-2:2014 - 2 - Fore

13、word The text of document 86B/3748/FDIS, future edition 1 of IEC 61753-071-2, prepared by SC 86B “Fibre optic interconnecting devices and passive components“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-071-2:2014. The following dates

14、 are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-03-17 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-06-17 Attention is drawn

15、 to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61753-071-2:2014 was approved by CENELEC a

16、s a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61300-3-3 NOTE Harmonised as EN 61300-3-3. IEC 61300-3-4 NOTE Harmonised as EN 61300-3-4. IEC 61300-3-6 NOTE Harmonised as EN 61300-3-6. IE

17、C 62343-2 NOTE Harmonised as EN 62343-2. BS EN 61753-071-2:2014- 3 - EN 61753-071-2:2014 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document an

18、d are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (m

19、od), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60876-1 - Fibre optic interconnecting devices and passive components - Fibre optic spatial swi

20、tches - Part 1: Generic specification EN 60876-1 - IEC 61300 (Series) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures EN 61300 (Series) - IEC 61300-2-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement proce

21、dures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 - IEC 61300-2-9 - Fibre optic interconnecting devices and passive

22、components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 - IEC 61300-2-14 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power EN 61300-2-14 - IEC 61300-2-17 - Fibre optic interco

23、nnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold EN 61300-2-17 - IEC 61300-2-18 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN

24、61300-2-18 - IEC 61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-22 - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature - - BS EN 6

25、1753-071-2:2014EN 61753-071-2:2014 - 4 - IEC 61300-2-42 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief EN 61300-2-42 - IEC 61300-2-44 - Fibre optic interconnecting devices and passive compon

26、ents - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices EN 61300-2-44 - IEC 61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polariz

27、ation dependent loss in a single-mode fibre optic device EN 61300-3-2 - IEC 61300-3-7 (mod) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single

28、mode components EN 61300-3-7 - IEC 61300-3-20 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices EN 61300-3-20 - IEC 61300-3-21 - Fibre optic interconnecting de

29、vices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time EN 61300-3-21 - IEC 61300-3-50 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measureme

30、nts - Crosstalk for optical spatial switches EN 61300-3-50 - IEC 61753-1 2007 Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards EN 61753-1 2007 BS EN 61753-071-2:2014 2 IEC 61753-071-2:2014 IEC 2014 CONTENTS 1 Sco

31、pe 5 2 Normative references 5 3 Terms and definitions 6 4 Test conditions 7 5 Test report . 8 6 Reference components 8 7 Performance requirements. 8 7.1 Dimensions . 8 7.2 Test details and requirements . 8 Annex A (normative) Sample size 13 Bibliography 14 Figure 1 Configuration of 1 2 spatial switc

32、h . 6 Figure 2 Configuration of 2 2 spatial switch, non-crossover type . 7 Figure 3 Configuration of 2 2 spatial switch, crossover type 7 Table 1 Single-mode spectral bands 8 Table 2 Test details and requirements . 8 Table A.1 Number of samples for each test 13 BS EN 61753-071-2:2014IEC 61753-071-2:

33、2014 IEC 2014 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 071-2: Non-connectorized single-mode fibre optic 1 2 and 2 2 spatial switches for category C Controlled environments 1 Scope This part of IEC 61753 contains the minimum initial test and measurement r

34、equirements and severities which non-connectorized single-mode fibre optic 1 2 and 2 2 spatial switches need to satisfy in order to be categorized as meeting the requirements of category C Controlled environments, as defined in Annex A of IEC 61753-1:2007. 2 Normative references The following docume

35、nts, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60876-1, Fibre optic in

36、terconnecting devices and passive components Fibre optic spatial switches Part 1: Generic specification IEC 61300 (all parts), Fibre optic interconnecting devices and passive components Basic test and measurement procedures IEC 61300-2-1, Fibre optic interconnecting devices and passive components Ba

37、sic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention IEC 61300-2-9, Fibre optic interconnecting devices and passive components B

38、asic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-14, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests High optical power IEC 61300-2-17, Fibre optic interconnecting devices and passive components Basic test and me

39、asurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance IEC 61300-2-19, Fibre optic interconnecting devices and passive components Basic test and m

40、easurement procedures Part 2-19: Tests Damp heat (steady state) IEC 61300-2-22, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Change of temperature BS EN 61753-071-2:2014 6 IEC 61753-071-2:2014 IEC 2014 IEC 61300-2-42, Fibre optic i

41、nterconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static side load for connectors IEC 61300-2-44, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Flexing of the strain relief of fibre

42、 optic devices IEC 61300-3-2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-2: Examination and measurements Polarization dependent loss in a single-mode fibre optic device IEC 61300-3-7, Fibre optic interconnecting devices and passive compone

43、nts Basic test and measurement procedures Part 3-7: Examinations and measurements Wavelength dependence of attenuation and return loss of single mode components IEC 61300-3-20, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-20: Examinations an

44、d measurements Directivity of fibre optic branching devices IEC 61300-3-21, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-21: Examinations and measurements Switching time and bounce time IEC 61300-3-50, Fibre optic interconnecting devices and

45、 passive components Basic test and measurement procedures Part 3-50: Examinations and measurements Crosstalk for optical spatial switches IEC 61753-1:2007, Fibre optic interconnecting devices and passive components performance standard Part 1: General and guidance for performance standards IEC/TR 62

46、343-6-5, Dynamic modules Part 6-5: Investigation of operating mechanical shock and vibration tests for dynamic modules ITU-T G-series Recommendations: Transmission systems and media,digital systems and networks Supplement 39, Optical system design and engineering considerations 3 Terms and definitio

47、ns For the purposes of this document, the following terms and definitions, as well as those given in IEC 60876-1, apply. 3.1 1 2 spatial switch single-mode fibre-pigtailed 1 2 spatial switch as shown in Figure 1 Note 1 to entry: There is one input port and two output ports. Key 1, 2, and 3 show a po

48、rt number. Figure 1 Configuration of 1 2 spatial switch Input Outputs 1 3 2 State 1 State 2 IEC 1577/14 BS EN 61753-071-2:2014IEC 61753-071-2:2014 IEC 2014 7 3.2 2 2 spatial switch single-mode fibre-pigtailed 2 2 spatial switch as shown in Figures 2 and 3 Note 1 to entry: There are two input ports a

49、nd two output ports. Key 1, 2, 3 and 4 show a port number. Figure 2 Configuration of 2 2 spatial switch, non-crossover type Key 1, 2, 3 and 4 show a port number. Figure 3 Configuration of 2 2 spatial switch, crossover type 3.3 operational vibration vibration test whose relevant parameters should be monitored during the te