EN 60317-42-1997 en Specifications for particular types of winding wires - Part 42 Polyester-amide-imide enamelled round copper wire class 200 (Incorporates Amendment A1 2010)《特种绕组.pdf

《EN 60317-42-1997 en Specifications for particular types of winding wires - Part 42 Polyester-amide-imide enamelled round copper wire class 200 (Incorporates Amendment A1 2010)《特种绕组.pdf》由会员分享，可在线阅读，更多相关《EN 60317-42-1997 en Specifications for particular types of winding wires - Part 42 Polyester-amide-imide enamelled round copper wire class 200 (Incorporates Amendment A1 2010)《特种绕组.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN60317-42:1997+A1:2010Specifications for particular types of winding wires Part 42: Polyester-amide-imide enamelled round copper wire, class 200ICS 29.060.10BS EN 60317-42:1997+A1:2010This British Standard, having been prepared under the direction of the Electrotechnical Sector B

2、oard, was published under the authority of the Standards Boardand comesinto effect on15 August 1997 BSI 2010ISBN 978 0 580 67187 6National forewordThis British Standard is the UK implementation of EN 60317-42:1997+A1:2010. It is identical with IEC 60317-42:1997, incorporating amendment 1:2010. It su

3、persedes BS EN 60317-42:1997, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GEL/55, Winding wires.The start and finish of text introduced or altered by amendment is indicatedin the text by tags. Tags indicating changes to IEC text carry the number of

4、 the IEC amendment. For example, text altered by IEC amendment 1 is indicated by A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its co

5、rrect application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments/corrigenda issued since publicationDate Comments31 May 2010 Implementation of IEC amendment 1:2010 with CENELEC endorsement A1:2010.EUROPEAN STANDARD EN 60317-42/A1 NORME EUROPENNE EUROPISCH

6、E NORM March 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2010 CENELEC - All rights of exploitation in any form and by any

7、 means reserved worldwide for CENELEC members. Ref. No. EN 60317-42:1997/A1:2010 E ICS 29.060.10 English version Specifications for particular types of winding wires - Part 42: Polyester-amide-imide enamelled round copper wire, class 200 (IEC 60317-42:1997/A1:2010) Spcifications pour types particuli

8、ers de fils de bobinage - Partie 42: Fil de section circulaire en cuivre maill avec polyester-amide-imide, classe 200 (CEI 60317-42:1997/A1:2010) Technische Lieferbedingungen fr bestimmte Typen von Wickeldrhten - Teil 42: Runddrhte aus Kupfer, lackisoliert mit Polyesteramid-imid, Klasse 200 (IEC 603

9、17-42:1997/A1:2010) This amendment A1 modifies the European Standard EN 60317-42:1997; it was approved by CENELEC on 2010-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a national standard wi

10、thout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This amendment exists in three official versions (English, French, German). A version in any other language mad

11、e by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, D

12、enmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 60317-42:1997+A1:2010ForewordThe text of documen

13、t 55/531/FDIS, future edition 1 of IEC 60317-42, prepared by IEC TC 55 Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC asEN 60317-42 on 1997-03-11.The following dates were fixed: Annexes designated “normative” are part of the body of the standard.In this sta

14、ndard, Annex ZA is normative.Annex ZA has been added by CENELEC.Endorsement noticeThe text of the International StandardIEC 60317-42:1997 was approved by CENELEC as a European Standard without any modification.ContentsPageForeword 2Introduction 31 Scope 32 Normative references 33 Definitions and gen

15、eral noteson methods of test and appearance 34 Dimensions 35 Electrical resistance 36 Elongation 37 Springiness 38 Flexibility and adherence 39 Heat shock 310 Cut-through 311 Resistance to abrasion 312 Resistance to solvents 413 Breakdown voltage 414 Continuity of insulation 415 Temperature index 41

16、6 Resistance to refrigerants 417 Solderability 418 Heat or solvent bonding 419 Dielectric dissipation factor 420 Resistance to transformer oil 421 Loss of mass 423 Pin hole test 430 Packaging 4Annex ZA (normative) Normative references to international publications with their correspondingEuropean pu

17、blications Table 1 Resistance to abrasion 45 latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 1997-12-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 1997-12-

18、01Foreword to amendment A1The text of document 55/1128/CDV, future amendment 1 to IEC 60317-42:1997, prepared by IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60317-42:1997on 2010-03-01.Attention is drawn to the possibility

19、 that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights.The following dates were fixed: Annex ZA has been added by CENELEC. latest date by which the amendment has to be implemented at

20、 national level by publication of an identical national standard or by endorsement (dop) 2010-12-01 latest date by which the national standards conflicting with the amendmenthave to be withdrawn (dow) 2010-03-01 BSI 20102Endorsement noticeThe text of amendment 1:2010 to the International Standard IE

21、C 60317-42:1997 was approved by CENELEC as an amendment to the EuropeanStandard without any modification.BS EN 60317-42:1997+A1:2010 BSI 2010 3IntroductionThis part of IEC 317 forms an element of a series which deals with insulated wires used for windings in electrical equipment. The series has thre

22、e groups describing:1) methods of test (IEC 851);2) specifications (IEC 317);3) packaging (IEC 264).1 ScopeThis part of IEC 317 specifies the requirements of enamelled round copper winding wire of class 200 with a sole coating based on polyester-amide-imide resin, which may be modified providing it

23、retains the chemical identity of the original resin and meets all specified wire requirements.NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics.Class 200 is a thermal class that requi

24、res a minimum temperature index of 200 and a heat shock temperature of at least 220 C.The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equ

25、ipment involved.The range of nominal conductor diameters covered by this part is: Grade 1: 0,018 mm up to and including 1,600 mm; Grade 2: 0,025 mm up to and including 5,000 mm.The nominal conductor diameters are specified in clause 4 of IEC 317-0-1.2 Normative referencesThe following normative docu

26、ment contains provisions which, through reference in this text, constitute provisions of this part of IEC 317. At the time of publication, the edition indicated was valid. All normative documents are subject to revision, and parties to agreements based on this part of IEC 317 are encouraged to inves

27、tigate the possibility of applying the most recent edition of the normative document indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.IEC 60317-0-1:2008, Specifications for particular types of winding wires Part 01: General requirements Enamelled

28、round copper wire. 3 Definitions and general notes on methods of test and appearanceFor definitions and general notes on methods of test, 3.1 Definitions and general notes on methods of test See Subclause 3.3 of IEC 60317-0-1.3.2 Appearancesee Clause 3 of IEC 60317-0-1.In case of inconsistencies bet

29、ween IEC 60317-0-1 and this standard, IEC 60317-42 shall prevail.4 DimensionsSee clause 4 of IEC 317-0-1.5 Electrical resistanceSee clause 5 of IEC 317-0-1.6 ElongationSee clause 6 of IEC 317-0-1.7 SpringinessSee clause 7 of IEC 317-0-1.8 Flexibility and adherenceSee clause 8 of IEC 317-0-1, where t

30、he constant K used for the calculation of the number of revolutions for the peel test shall be 110 mm.9 Heat shockSee clause 9 of IEC 317-0-1, where the minimum heat shock temperature shall be 220 C.10 Cut-throughNo failure shall occur within 2 min at 300 C.11 Resistance to abrasion (nominal conduct

31、or diameters from 0,250 mm up to and including 2,500 mm)The wire shall meet the requirements given inTable 1. BS EN 60317-42:1997+A1:20104 BSI 2010 Table 1 Resistance to abrasion12 Resistance to solventsSee clause 12 of IEC 317-0-1.13 Breakdown voltageSee clause 13 of IEC 317-0-1, where the elevated

32、 temperature shall be 200 C.14 Continuity of insulationSee clause 14 of IEC 317-0-1.15 Temperature indexSee clause 15 of IEC 317-0-1, where the minimum temperature index shall be 200.16 Resistance to refrigerantsTest inappropriate.17 SolderabilityTest inappropriate.18 Heat or solvent bondingTest ina

33、ppropriate.19 Dielectric dissipation factorTest inappropriate.20 Resistance to transformer oilTest inappropriate.21 Loss of massTest inappropriate.22 Clause deleted23 Pin hole testSee Clause 23 of IEC 60317-0-1.30 PackagingSee clause 30 of IEC 317-0-1.Grade 1 Grade 2Nominal conductor diameterMinimum

34、 average force to failureMinimum force to failure of each measurementMinimum average force to failureMinimum force to failure of each measurementmm N N N N0,2500,2800,3150,3550,4000,4500,5000,5600,6300,7100,8000,9001,0001,1201,2501,4001,6001,8002,0002,2402,5003,003,253,503,754,054,354,655,005,355,70

35、6,106,557,057,608,208,809,452,552,752,953,203,453,703,954,254,554,855,155,555,956,456,057,458,004,905,255,656,056,507,007,508,008,609,209,9010,611,312,112,913,914,916,017,118,219,44,154,454,805,155,505,906,356,807,307,808,409,009,6010,211,011,812,613,514,415,416,4NOTE For intermediate nominal conduc

36、tor diameters, the value of the next larger nominal conductor diameter shall be taken.BS EN 60317-42:1997+A1:2010 BSI 2010 5Annex ZA (normative)Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for t

37、he application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title DH/NE Year IEC 60317-0-1 2008 Specifications for particular types of windingwires - Part 0-1: General requirements - Enamelled round copper wire EN 60317-0-1 2008 BS EN 60317-42:1997+A1:2010