EN 566-2006 1070 Mountaineering Equipment - Slings - Safety Requirements and Test Methods《登山运动器材 悬带 安全要求和试验方法》.pdf

《EN 566-2006 1070 Mountaineering Equipment - Slings - Safety Requirements and Test Methods《登山运动器材 悬带 安全要求和试验方法》.pdf》由会员分享，可在线阅读，更多相关《EN 566-2006 1070 Mountaineering Equipment - Slings - Safety Requirements and Test Methods《登山运动器材 悬带 安全要求和试验方法》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 566:2006Mountaineering equipment Slings Safety requirements and test methodsThe European Standard EN 566:2006 has the status of a British StandardICS 97.220.40g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g3

2、6g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Thu Aug 09 02:37:39 GMT+00:00 2007, Uncontrolled Copy, (c) BSIBS EN 566:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April

3、 2007 BSI 2007ISBN 978 0 580 50537 9National forewordThis British Standard was published by BSI. It is the UK implementation of EN 566:2006. It supersedes BS EN 566:1997 which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee SW/136, Sports, playground and oth

4、er recreational equipment, to Subcommittee SW/136/5, Mountaineering equipment.A list of organizations represented on SW/136/5 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct app

5、lication.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Thu Aug 09 02:37:39 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 566December

6、2006ICS 97.220.40 Supersedes EN 566:1997 English VersionMountaineering equipment - Slings - Safety requirements andtest methodsEquipement dalpinisme et descalade - Anneaux -Exigences de scurit et mthodes dessaiBergsteigerausrstung - Schlingen - SicherheitstechnischeAnforderungen und PrfverfahrenThis

7、 European Standard was approved by CEN on 25 October 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical reference

8、s concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its

9、own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembou

10、rg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of

11、exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 566:2006: ELicensed Copy: Wang Bin, na, Thu Aug 09 02:37:39 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 566:2006 (E) 2 Contents Page Foreword3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms

12、and definitions .5 4 Safety requirements 5 4.1 Stability .5 4.2 Stitching6 4.3 Tensile strength .6 5 Test methods6 5.1 Stability .6 5.2 Stitching6 5.3 Tensile strength .6 5.3.1 Test sample 6 5.3.2 Conditioning.6 5.3.3 Determination of tensile strength 6 6 Marking .7 7 Information supplied by the man

13、ufacturer .7 Annex A (informative) Standards on mountaineering equipment.8 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC9 Licensed Copy: Wang Bin, na, Thu Aug 09 02:37:39 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 566:2

14、006 (E) 3 Foreword This document (EN 566:2006) has been prepared by Technical Committee CEN/TC 136 “Sports, playground and other recreational equipment“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an iden

15、tical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest by June 2007. This document supersedes EN 566:1997. This document has been prepared under a mandate given to CEN by the European Commission and the Euro-pean Free Trade Assoc

16、iation to support Essential Requirements of EU Directive 89/686/EEC. For relationship with EU Directives, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound

17、 to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer-lan

18、d and United Kingdom. Licensed Copy: Wang Bin, na, Thu Aug 09 02:37:39 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 566:2006 (E) 4 Introduction The text of this European Standard is based on the former UIAA-Standard J (Union Internationale des Associa-tions dAlpinisme), which has been developed with

19、 international participation. This European Standard is one of a package of standards for mountaineering equipment, see Annex A. Licensed Copy: Wang Bin, na, Thu Aug 09 02:37:39 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 566:2006 (E) 5 1 Scope This European Standard specifies safety requirements a

20、nd test methods for slings used for mountaineering in-cluding climbing. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the reference

21、d document (including any amendments) applies. EN ISO 139, Textiles Standard atmospheres for conditioning and testing (ISO 139:2005) 3 Terms and definitions For the purposes of this document, the following term and definition applies. 3.1 sling tape, accessory cord or rope joined together by stitchi

22、ng or other means of fastening. The shape and length are not specified NOTE Examples of construction of slings are illustrated in Figure 1. Figure 1 Examples of construction 4 Safety requirements 4.1 Stability When shuttleless loom webbing is used, the weft shall be locked by an additional locking t

23、hread or by any other system, which guarantees that the edges cannot be unravelled when one of the yarns breaks. Licensed Copy: Wang Bin, na, Thu Aug 09 02:37:39 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 566:2006 (E) 6 4.2 Stitching Where stitching is used to provide safety and strength (e.g. in

24、joints) the visible area of stitching shall contrast with the tape in colour or surface appearance. 4.3 Tensile strength When tested in accordance with 5.3, the tensile strength shall be at least 22 kN. 5 Test methods 5.1 Stability Check the requirements of 4.1 using a test sample of 1 000 mm minimu

25、m length and cut one warp and one weft thread. 5.2 Stitching Carry out a visual examination to check that the requirements specified in 4.2 are met. 5.3 Tensile strength 5.3.1 Test sample One sample of the shortest length of the sling type shall be tested. The test shall always be carried out on an

26、unused test sample. 5.3.2 Conditioning Condition the test samples as described in EN ISO 139. Carry out the test at a relative humidity which may be outside the standard atmosphere given in EN ISO 139, but at a temperature of (23 5) C, in which case the test shall begin within 5 min of removal from

27、the conditioning atmosphere. 5.3.3 Determination of tensile strength Attach the test sample between two bars offering a contact radius of (5 0,05) mm to the sling and with a mean roughness value, Ra, not exceeding 0,8 m and a peak to valley height, Rmax, not exceeding 6,3 m. Determine the loading sp

28、eed, v, as a function of the free length of the test sample, using Equation (1): v = 0,5 l with an accuracy of 20 % (1) where v is the loading speed in millimetres per minute; l is the free length in millimetres of the test sample overall laid out in the flat. Licensed Copy: Wang Bin, na, Thu Aug 09

29、 02:37:39 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 566:2006 (E) 7 6 Marking Slings shall be marked with at least the following items which shall be given at least in the official language(s) of the state of destination within the European Community: a) name of the manufacturer or its representat

30、ive in the European Community; b) tensile strength which the manufacturer ensures at the time of manufacturing; c) number of this European Standard, i.e. EN 566; d) year of manufacture. 7 Information supplied by the manufacturer The sling shall be supplied with an explanatory leaflet, and written in

31、 at least the official language(s) of the state of destination within the European Community containing at least the following items: a) name and address of the manufacturer or its representative in the European Community; b) number of this European Standard, i.e. EN 566; c) meaning of any marking o

32、n the product; d) tensile strength which the manufacturer ensures at the time of manufacturing; e) use of the product; f) how to choose other components for use in the system; g) how to maintain/service the product, on the effects of chemical reagents and how to disinfect the product without adverse

33、 effect; h) lifespan of the product or how to assess it and that after a serious fall the sling should be withdrawn from use as soon as possible; i) influence of wet and icy conditions; j) danger of sharp edges; k) influence of storage and aging due to use; l) influence of knots on the strength. Lic

34、ensed Copy: Wang Bin, na, Thu Aug 09 02:37:39 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 566:2006 (E) 8 Annex A (informative) Standards on mountaineering equipment Table A.1 List of standards on mountaineering equipment No Document Title 1 EN 892 Mountaineering equipment Dynamic mountaineering rop

35、es Safety requirements and test methods 2 EN 12275 Mountaineering equipment Connectors Safety requirements and test methods 3 EN 13089 Mountaineering equipment Ice-tools Safety requirements and test methods 4 EN 12277 Mountaineering equipment Harnesses Safety requirements and test methods 5 EN 12492

36、 Mountaineering equipment Helmets for mountaineers Safety requirements and test methods 6 EN 564 Mountaineering equipment Accessory cord Safety requirements and test methods 7 EN 565 Mountaineering equipment Tape Safety requirements and test methods 8 EN 566 Mountaineering equipment Slings Safety re

37、quirements and test methods 9 EN 12276 Mountaineering equipment Frictional anchors Safety requirements and test methods 10 EN 12270 Mountaineering equipment Chocks Safety requirements and test methods 11 EN 567 Mountaineering equipment Rope clamps Safety requirements and test methods12 EN 958 Mounta

38、ineering equipment Energy absorbing systems for use in klettersteig (via ferrata) climbing Safety requirements and test methods 13 EN 959 Mountaineering equipment Rock anchors Safety requirements and test methods 14 EN 568 Mountaineering equipment Ice anchors Safety requirements and test methods 15

39、EN 569 Mountaineering equipment Pitons Safety requirements and test methods 16 EN 893 Mountaineering equipment Crampons Safety requirements and test methods 17 prEN 15151 Mountaineering equipment Descenders Safety requirements and test methods 18 EN 12278 Mountaineering equipment Pulleys Safety requ

40、irements and test methods Licensed Copy: Wang Bin, na, Thu Aug 09 02:37:39 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 566:2006 (E) 9 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC This European Standard has been prepared

41、 under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 89/686/EEC on the approximation of the laws of the Member States relating to per-sonal protective equipment. Once

42、this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the causes of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a pr

43、esumption of confor-mity with the corresponding Essential Requirements of that Directive and associated EFTA regulations. Table ZA.1 Correspondence between this European Standard and Directive 89/686/EEC Clause(s)/sub-clause(s) of this EN Essential Requirements (ERs) of Directive 89/686/EEC Qualifyi

44、ng remarks/ Notes 4.1, 4.2 1.2.1 Absence of risk and other factors 4.3 1.3.2 Lightness and design strength 6, 7 1.4 Information supplied by the manufacturer WARNING: Other requirements and other EU Directives may be applicable to the product(s) failing within the scope of this standard. Licensed Cop

45、y: Wang Bin, na, Thu Aug 09 02:37:39 GMT+00:00 2007, Uncontrolled Copy, (c) BSIBS EN 566:2006BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at t

46、he international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and servic

47、es. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers membe

48、rs an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20

49、8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service.