EN 3813-2013 en Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar and wire for forged fasteners - De 50 mm《航空航天系列 钛合金TI-P64001(Ti-6Al-4V) 退火 酒吧和丝锻紧固件-De = 50.pdf

《EN 3813-2013 en Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar and wire for forged fasteners - De 50 mm《航空航天系列 钛合金TI-P64001(Ti-6Al-4V) 退火 酒吧和丝锻紧固件-De = 50.pdf》由会员分享，可在线阅读，更多相关《EN 3813-2013 en Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar and wire for forged fasteners - De 50 mm《航空航天系列 钛合金TI-P64001(Ti-6Al-4V) 退火 酒吧和丝锻紧固件-De = 50.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 3813:2013Aerospace series Titanium alloy TI-P64001 (Ti-6Al-4V) Annealed Bar and wire for forged fasteners De 50 mmIncorporating corrigendum January 2014BS EN 3813:2013National forewordThis British Standard is the UK implementation of EN 3813:2013.The UK participation i

2、n its preparation was entrusted by Technical Committee ACE/61, Metallic materials for aerospace purposes, to Subcommittee ACE/61/-/49, Titanium and its Alloys for Aerospace Purposes.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication

3、does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 85172 8ICS 49.025.30Compliance with a British Standard cannot confer immunity froml

4、egal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2013.Amendments/corrigenda issued since publicationDate Text affected31 January 2014 Implementation of CEN correction notice 30 October 2013: title of standard amende

5、dBRITISH STANDARDEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3813 January 2013 ICS 49.025.30 English Version Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar and wire for forged fasteners - De 50 mm Srie arospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) - Recuit

6、- Barre et fil pour lments de fixations forges - De 50 mm Luft- und Raumfahrt - Titanlegierung TI-P64001(Ti-6Al-4V) - Geglht - Stangen und Drhte zum Warmstauchschmieden fr Verbindungselemente - De 50 mm This European Standard was approved by CEN on 10 March 2011. CEN members are bound to comply with

7、 the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Manage

8、ment Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same stat

9、us as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta

10、, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN

11、All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3813:2013 E BS EN 3813:2013EN 3813:2013 (E) 2 Foreword This document (EN 3813:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-

12、STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the st

13、atus of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject

14、 of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulga

15、ria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tur

16、key and the United Kingdom. BS EN 3813:2013EN 3813:2013 (E) 3 Contents Introduction . 4 1 Scope 5 2 Normative references 5 BS EN 3813:2013EN 3813:2013 (E) 4 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this

17、 series is described in EN 4258. This standard has been prepared in accordance with EN 4500-004. BS EN 3813:2013EN 3813:2013 (E) 5 1 Scope This standard specifies the requirements relating to: Titanium alloy Ti-6Al-4V Annealed Bar and wire for forged fasteners De 50 mm for aerospace applications. 2

18、Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendme

19、nts) applies. EN 2032-2, Aerospace series Metallic materials Part 2: Coding of metallurgical condition in delivery condition EN 3114-002, Aerospace series Test method Microstructure of ( + ) titanium alloy wrought products Part 002: Microstructure of bars, sections, forging stock and forgings EN 405

20、0-004, Aerospace series Test method for metallic materials Ultrasonic inspection of bars, plates, forging stock and forgings Part 004: Acceptance criteria EN 4258, Aerospace series Metallic materials General organization of standardization Links between types of EN standards and their useEN 4500-004

21、, Aerospace series Metallic materials Rules for drafting and presentation of material standards Part 004: Specific rules for titanium and titanium alloysEN 4800-002, Aerospace series Titanium and titanium alloys Technical specification Part 002: Bar and section EN 4800-004, Aerospace series Titanium

22、 and titanium alloys Technical specification Part 004: Wire BS EN 3813:2013EN 3813:2012 (E) 6 1 Material designation Titanium alloy Ti-6Al-4V 2 Chemical composition % Element Al V O + 2N N H Fe C Y Others Ti Each Total min. 5,50 3,50 Base max. 6,75 4,50 0,25 0,03 0,008 0 0,30 0,08 0,005 0 0,10 0,40

23、3 Method of melting See EN 4800-002 and EN 4800-004. 4.1 Form Bar and wire 4.2 Method of production Wrought 4.3 Limit dimension(s) mm De 50 5 Technical specification EN 4800-002 and EN 4800-004 6.1 Delivery condition Annealed Heat treatment 700 C 790 C / 1 h t 2 h / AC or in inert atmosphere 6.2 Del

24、ivery condition code U a7 Use condition Delivery condition Heat treatment Characteristics 8.1 Test sample(s) See EN 4800-002 and EN 4800-004. Location for test sample b8.2 Test piece(s) See EN 4800-002 and EN 4800-004. 8.3 Heat treatment Use condition See line 29. 9 Dimensions concerned mm De 50 De2

25、5 mm, location of test specimen shall be the mid-radius. 99 Typical use Forged fasteners BS EN 3813:2013EN 3813:2012 (E) 8 100 Product qualification See EN 4800-002 and EN 4800-004. Qualification programme to be agreed between manufacturer and purchaser. This page deliberately left blankBSI is the n

26、ational body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group H

27、eadquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a depe

28、ndable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Stan

29、dards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchase

30、d. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscripti

31、on products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and recei

32、ve substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised

33、or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon

34、as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an ina

35、ccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copy

36、right in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or t

37、ransmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW