EN 13485-2001 en Thermometers for Measuring the Air and Product Temperature for the Transport Storage and Distribution of Chilled Frozen Deep-Frozen Quick-Frozen Food and Ice Cream.pdf

《EN 13485-2001 en Thermometers for Measuring the Air and Product Temperature for the Transport Storage and Distribution of Chilled Frozen Deep-Frozen Quick-Frozen Food and Ice Cream.pdf》由会员分享，可在线阅读，更多相关《EN 13485-2001 en Thermometers for Measuring the Air and Product Temperature for the Transport Storage and Distribution of Chilled Frozen Deep-Frozen Quick-Frozen Food and Ice Cream.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep- frozen/quick- frozen food and ice cream - Tests, performance, suitability The European Standard EN 13485:2001 has the status ofa British Standard ICs 17.2

2、00.20; 67.260 BS EN 13485:2001 Wk present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represent

3、ed on this committee can be obtained on request to its secretary. Cr oss-r e fer enc e s The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspon

4、dence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of

5、 itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 21 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. O BSI O8 April 2002 ISBN O

6、580 39467 O EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13485 November 2001 ICs 17.200.20; 67.260 English version Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep- frozen/quick-frozen food and ice cream - Tests,

7、petformance, su ita bi I ity Thermomtres pour le mesurage de la temprature de lair et des produits pour le transport, lentreposage et la distribution de denres alimentaires rfrigres, congeles, surgeles et des crmes glaces - Essais, performance, aptitude lemploi Thermometer zur Messung der Luft- und

8、Produkttemperatur fr den Transport, die Lagerung und die Verteilung von gekhlten, gefrorenen, tiefgefrorenen Lebensmitteln und Eiskrem - Prfungen, Leistung, Gebrauchstauglich keit This European Standard was approved by CEN on 28 September 2001. CEN members are bound to comply with the CENKENELEC Int

9、ernal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member

10、. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are

11、 the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION EUROPISCHES KOMITEE FR NORMUNG COMI

12、T EUROPEN DE NORMALISATION Management Centre: rue de Stassart, 36 B-1050 Brussels O 2001 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13485:2001 E EN 13485:2001 (E) Contents page Foreword 3 Introduction . 4 1 Scope 5 2 Normative

13、 references 5 3 Terms and definitions 5 4 Requirements . 9 5 Test methods 13 6 Conditions of acceptance . 18 7 Designation . 19 8 Marking . 19 9 Periodic verification . 19 Annex A (informative) Example of data form describing suitability for use of equipment of a specific series (to be filled in by

14、the manufacturer) . 20 Bibliography 21 2 EN 13485:2001 (E) Foreword This European Standard has been prepared by Technical Committee CEN/TC 141 “Pressure gauges - Thermometers - Means of measuring and/or recording temperature in the cold chain“, the secretariat of which is held by AFNOR. This Europea

15、n Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2002, and conflicting national standards shall be withdrawn at the latest by May 2002. This European Standard is a document meeting the objectives of direct

16、ives - 92/1/EEC of January 15, 1992 of the Commission of the monitoring of temperatures in the means of transport, warehousing and storage of quick-frozen foodstuffs intended for human consumption ; - 92/2/EEC of January 13, 1992 of the Commission laying down the sampling procedure and the community

17、 method of analysis for the official control of the temperatures of quick-frozen foods intended for human consumption ; - 93/43/EEC of June 14, 1993 of the Council of the hygiene of foodstuffs and in particular on “temperature control criteria“ . Annex A is informative. This standard contains a Bibl

18、iography. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, No

19、rway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 3 EN 13485:2001 (E) Introduction This European Standard specifies the technical and functional characteristics of thermometers. It does not define the location of the thermometer and its sensors with respect to types of usage such as

20、 transport, storage and distribution. 4 EN 13485:2001 (E) 1 Scope This European Standard sets the technical and functional characteristics for all types of thermometers (electronic, mechanical, etc.) for equipping the means used for the transport, storage and distribution of chilled, frozen, deep- f

21、rozen/quick-frozen food and ice cream and for measuring the internal temperature of the products. It specifies the test methods which allow the verification of the equipments conformity to suitability and performance requirements. It applies to the whole indicator-temperature sensor(s). The temperat

22、ure sensor(s) may be integrated into the thermometer or remote from it (external temperature sensor(s). 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the

23、text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to ap

24、plies (including amendments). EN 5008 1-1, Electromagnetic compatibility - Generic emission standard - Part I: Residential, commercial and light industry. EN 50082-1 , Electromagnetic compatibility - Generic immunity standard - Part I: Residential, commercial and light industry. EN 60068-2-27, Basic

25、 environmental testing procedures - Part 2: Tests - Test Ea and guidance: Shock (IEC 60068- 27: 1987). EN 60529, Degrees of protection provided by enclosures (IP Code) (IEC 60529: 1989). EN 61 O1 0-1, Safety requirements for electrical equipment for measurement, control and laboratory use - Part I:

26、General requirements. (CE1 610010-1:1990 + Al:1992, modified). EN 13486, Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification. 3 Terms and definitions For the purposes of this Europe

27、an Standard, the following terms and definitions apply. 3.1 (measurable) quantity attribute of a phenomenon, body or substance that may be distinguished qualitatively and determined quantitatively 1) EXAMPLE Temperature 3.2 unit (of measurement) particular quantity, defined and adopted by convention

28、, with which other quantities of the same kind are compared in order to express their magnitudes relative to that quantity I) ) Definition taken from VIM (see Bibliography). 5 EN 13485:2001 (E) EXAMPLE The unit of temperature used in this standard is “degree Celsius“ 3.3 symbol of a unit conventiona

29、l sign designating a unit of measurement 2, EXAMPLE “C is the symbol of “degree Celsius“ 3.4 value (of a quantity) magnitude of a particular quantity generally expressed as a unit of measurement multiplied by a number 2, EXAMPLE 15C 3.5 true value (of a quantity) value consistent with the definition

30、 of a given particular quantity NOTE This is a value that would be obtained by a perfect measurement 2, 3.6 measurement set of operations having the object of determining a value of a quantity 2, 3.7 measurand particular quantity subject to a measurement 2) EXAMPLE Tem peratu re 3.8 influence quanti

31、ty quantity that is not the measurand but that affects the result of the measurement 2, 3.9 indication (of a measuring instrument) value of a quantity provided by a measuring instrument 2, 3.10 accu racy of measu remen t closeness of the agreement between the result of a measurement and a true value

32、 of the measurand 2, 3.1 1 uncertainty of measurement parameter, associated with the result of a measurement, that characterizes the dispersion of the values that could reasonably be attributed to the measurand 2, 3.12 error (of measurement) result of a measurement minus a true value of the measuran

33、d 2, 3.13 relative error error of a measurement divided by a true value of the measurand 2, Definition taken from VIM. 6 EN 13485:2001 (E) 3.14 measuring instrument device intended to be used to make measurements, alone or in conjunction with supplementary device(s) 2, 3.15 displaying device ; indic

34、ating device part of a measuring instrument that displays an indication 3) 3.16 thermometer any device to measure and display temperature 3.17 temperature sensor element of a measuring instrument or measuring chain that is directly affected by the temperature 3.18 external temperature sensor sensor

35、which measures a temperature independent of the enclosure of the indicating device 3.19 internal temperature sensor sensor which measures the temperature of the enclosure of the thermometer 3.20 scale (of a measuring instrument) ordered set of marks, together with any numbering, forming part of a di

36、splaying device of a measuring instrument 3, 3.21 scale division part of a scale between two successive scale marks 3, 3.22 gauging (of a measuring instrument) operation of fixing the positions of the scale marks of a measuring instrument (in some cases of certain principal marks only), in relation

37、to the corresponding values of the measurands 3, 3.23 adjustment (of a measuring instrument) operation of bringing a measuring instrument into a state of performance suitable for its use 3, 3.24 user adjustment (of a measuring instrument) adjustment employing the means at the disposal of the user 3)

38、 3.25 span modulus of the difference between the two limits of a nominal range 3, EXAMPLE For a nominal range of - 35 “C to + 25 “C, the span is 60 “C 3.26 measuring range ; working range set of values for which the error of a measuring instrument is intended to lie within specified limits 3, 3, Def

39、inition taken from VIM. 7 EN 13485:2001 (E) 3.27 rated operating conditions conditions of use for which specified metrological characteristics of a measuring instrument are intended to lie within given limits 3, 3.28 limiting conditions extreme conditions that a measuring instrument is required to w

40、ithstand without damage, and without degradation of specified metrological characteristics when it is subsequently operated under its rated operating conditions 4) 3.29 reference conditions conditions of use prescribed for testing the performance of a measuring instrument or for intercomparison of r

41、esults of measurements 4, 3.30 resolution (of a displaying device) smallest difference between indications of a displaying device that can be meaningfully distinguished 4, 3.31 response time time interval between the instant when a stimulus is subjected to a specified abrupt change and the instant w

42、hen the response reaches and remains within specified limits around its final steady value 4, 3.32 intrinsic error (of a measuring instrument) error of a measuring instrument, determined under reference conditions 4) 3.33 storage and transport conditions extreme conditions which a non-operational me

43、asuring instrument can withstand without damage and without degradation of specified metrological characteristics when it is subsequently operated under its rated operating conditions 3.34 chilled food food which has been subjected to cooling (without freezing) and is intended to be maintained at lo

44、w temperature 3.35 frozen food food which has been subjected to a freezing process specially designed to preserve the wholesomeness and quality of the product 3.36 deep-frozen or quick-frozen food food which has been subjected to a quick freezing process 3.37 verification operation which allows a re

45、cord to be made that the differences between the values given by a measuring device or measuring system (where the values represent the results of measurements) and the corresponding known values of a measured quantity are all less than the maximum permissible errors (or permitted error limits) NOTE

46、 unlikely that this will cause confusion. The use of parentheses around words of some terms, in clause 3, means that these words can be omitted if it is 4) Definition taken from VIM. 8 EN 13485:2001 (E) Type of application Chilled, frozen Chi Iled , frozen, d eep-frozen/Qu ick-frozen and ice cream 4

47、 Requirements Lower limit Higher limit tem peratu re temperature r - .- a v) C L + U O O LL al o 1 al r - .- a v) C L + U O O LL L al al + 5 Fu 5 9 9 O o + O hl I m 9 9 O o + O o I 9 9 rn W + O o I 9 9 O rn + O o I 9 9 O b + O d I 9 9 O rn + O d I 9 9 O b + O o I 9 9 O b + O o I 9 9 rn Co + O d 9 9

48、O W + O d I 9 9 rn Co + O d I 9 9 O W + O hl I $ C al v) m al C - E + .- $ Fu L al al + 5 r, ,o L L al o, C o, C 3 v) m .- L E U al k o al Q v) .- 8 O - EN 13485:2001 (E) Rated operating conditions Limiting conditions Storage and transport conditions Table 6 - Types of climatic environment (thermome

49、ters for products) - 20 “C + 30 “C - 30 “C + 50 “C - 30 “C + 70 “C 4.9.2 Mechanical vibrations Equipment for use on transport vehicles shall be able to operate in the following environmental conditions : - Vibration frequency : 5 Hz to 8,6 Hz ; displacement amplitude : 10 mm ; - Vibration frequency : 8,6 Hz to 150 Hz ; acceleration : 3 g. 4.9.3 Shock resistance Equipment for use on transport vehicles shall be able to operate in the conditions as defined in 5.5.5. 5 Test methods 5.1 Test list The thermometer (fixed or portable) shall be subjected to the tests list