EN 1253-3-2016 en Gullies for buildings - Part 3 Evaluation of conformity《建筑物的沟槽-第3部分 合格评定》.pdf

《EN 1253-3-2016 en Gullies for buildings - Part 3 Evaluation of conformity《建筑物的沟槽-第3部分 合格评定》.pdf》由会员分享，可在线阅读，更多相关《EN 1253-3-2016 en Gullies for buildings - Part 3 Evaluation of conformity《建筑物的沟槽-第3部分 合格评定》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 1253-3:2016Gullies for buildingsPart 3: Evaluation of conformityBSI Standards PublicationBS EN 1253-3:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 1253-3:2016. It supersedes BS EN 1253-3:1999 which is withdrawn.The UK participation in its preparati

2、on was entrusted to Technical Committee B/505/11, Waste Fittings For Sanitary Appliances.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible fo

3、r its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 90752 4 ICS 91.140.80 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Poli

4、cy and Strategy Committee on 31 May 2016.Amendments/corrigenda issued since publicationDate Text affectedBS EN 1253-3:2016g3g3g3g8g24g21g18g19g8g4g17g3g22g23g4g17g7g4g21g7g3g17g18g21g16g8g3g8g24g21g18g19g50g8g17g17g8g3g8g24g21g18g19g34g12g22g6g11g8g3g17g18g21g16g3EN 1253-3 g3 g3g3 g16g131g155g3g884g

5、882g883g888g3g12g6g22g3g891g883g484g883g886g882g484g890g882g3 g22g151g146g135g148g149g135g134g135g149g3g8g17g3g883g884g887g885g486g885g483g883g891g891g891g8g144g137g142g139g149g138g3g25g135g148g149g139g145g144g3g3g10g151g142g142g139g135g149g3g136g145g148g3g132g151g139g142g134g139g144g137g149g3g486g3

6、g19g131g148g150g3g885g483g3g8g152g131g142g151g131g150g139g145g144g3g145g136g3g133g145g144g136g145g148g143g139g150g155g3g4g152g131g142g145g139g148g149g3g135g150g3g149g139g146g138g145g144g149g3g146g145g151g148g3g132g159g150g139g143g135g144g150g149g3g486g3g19g131g148g150g139g135g3g885g483g3g50g152g131g

7、142g151g131g150g139g145g144g3g134g135g3g142g131g3g133g145g144g136g145g148g143g139g150g177g3g3 g4g132g142g161g151g136g135g3g136g242g148g3g10g135g132g161g151g134g135g3g486g3g23g135g139g142g3g885g483g3g5g135g153g135g148g150g151g144g137g3g134g135g148g3g14g145g144g136g145g148g143g139g150g161g150g3g23g138

8、g139g149g3g8g151g148g145g146g135g131g144g3g22g150g131g144g134g131g148g134g3g153g131g149g3g131g146g146g148g145g152g135g134g3g132g155g3g6g8g17g3g145g144g3g883g886g3g9g135g132g148g151g131g148g155g3g884g882g883g888g484g3g3g3g6g8g17g3g143g135g143g132g135g148g149g3g131g148g135g3g132g145g151g144g134g3g150g

9、145g3g133g145g143g146g142g155g3g153g139g150g138g3g150g138g135g3g6g8g17g512g6g8g17g8g15g8g6g3g12g144g150g135g148g144g131g142g3g21g135g137g151g142g131g150g139g145g144g149g3g153g138g139g133g138g3g149g150g139g146g151g142g131g150g135g3g150g138g135g3g133g145g144g134g139g150g139g145g144g149g3g136g145g148g3

10、g137g139g152g139g144g137g3g150g138g139g149g3g8g151g148g145g146g135g131g144g3g22g150g131g144g134g131g148g134g3g150g138g135g3g149g150g131g150g151g149g3g145g136g3g131g3g144g131g150g139g145g144g131g142g3g149g150g131g144g134g131g148g134g3g153g139g150g138g145g151g150g3g131g144g155g3g131g142g150g135g148g13

11、1g150g139g145g144g484g3g24g146g486g150g145g486g134g131g150g135g3g142g139g149g150g149g3g131g144g134g3g132g139g132g142g139g145g137g148g131g146g138g139g133g131g142g3g148g135g136g135g148g135g144g133g135g149g3g133g145g144g133g135g148g144g139g144g137g3g149g151g133g138g3g144g131g150g139g145g144g131g142g3g1

12、49g150g131g144g134g131g148g134g149g3g143g131g155g3g132g135g3g145g132g150g131g139g144g135g134g3g145g144g3g131g146g146g142g139g133g131g150g139g145g144g3g150g145g3g150g138g135g3g6g8g17g486g6g8g17g8g15g8g6g3g16g131g144g131g137g135g143g135g144g150g3g6g135g144g150g148g135g3g145g148g3g150g145g3g131g144g155

13、g3g6g8g17g3g143g135g143g132g135g148g484g3g3g23g138g139g149g3g8g151g148g145g146g135g131g144g3g22g150g131g144g134g131g148g134g3g135g154g139g149g150g149g3g139g144g3g150g138g148g135g135g3g145g136g136g139g133g139g131g142g3g152g135g148g149g139g145g144g149g3g523g8g144g137g142g139g149g138g481g3g9g148g135g14

14、4g133g138g481g3g10g135g148g143g131g144g524g484g3g4g3g152g135g148g149g139g145g144g3g139g144g3g131g144g155g3g145g150g138g135g148g3g142g131g144g137g151g131g137g135g3g143g131g134g135g3g132g155g3g150g148g131g144g149g142g131g150g139g145g144g3g151g144g134g135g148g3g150g138g135g3g148g135g149g146g145g144g149

15、g139g132g139g142g139g150g155g3g145g136g3g131g3g6g8g17g3g143g135g143g132g135g148g3g139g144g150g145g3g139g150g149g3g145g153g144g3g142g131g144g137g151g131g137g135g3g131g144g134g3g144g145g150g139g136g139g135g134g3g150g145g3g150g138g135g3g6g8g17g486g6g8g17g8g15g8g6g3g16g131g144g131g137g135g143g135g144g15

16、0g3g6g135g144g150g148g135g3g138g131g149g3g150g138g135g3g149g131g143g135g3g149g150g131g150g151g149g3g131g149g3g150g138g135g3g145g136g136g139g133g139g131g142g3g152g135g148g149g139g145g144g149g484g3g3g6g8g17g3g143g135g143g132g135g148g149g3g131g148g135g3g150g138g135g3g144g131g150g139g145g144g131g142g3g1

17、49g150g131g144g134g131g148g134g149g3g132g145g134g139g135g149g3g145g136g3g4g151g149g150g148g139g131g481g3g5g135g142g137g139g151g143g481g3g5g151g142g137g131g148g139g131g481g3g6g148g145g131g150g139g131g481g3g6g155g146g148g151g149g481g3g6g156g135g133g138g3g21g135g146g151g132g142g139g133g481g3g7g135g144g

18、143g131g148g141g481g3g8g149g150g145g144g139g131g481g3g9g139g144g142g131g144g134g481g3g9g145g148g143g135g148g3g28g151g137g145g149g142g131g152g3g21g135g146g151g132g142g139g133g3g145g136g3g16g131g133g135g134g145g144g139g131g481g3g9g148g131g144g133g135g481g3g10g135g148g143g131g144g155g481g3g10g148g135g1

19、35g133g135g481g3g11g151g144g137g131g148g155g481g3g12g133g135g142g131g144g134g481g3g12g148g135g142g131g144g134g481g3g12g150g131g142g155g481g3g15g131g150g152g139g131g481g3g15g139g150g138g151g131g144g139g131g481g3g15g151g154g135g143g132g145g151g148g137g481g3g16g131g142g150g131g481g3g17g135g150g138g135g

20、148g142g131g144g134g149g481g3g17g145g148g153g131g155g481g3g19g145g142g131g144g134g481g3g19g145g148g150g151g137g131g142g481g3g21g145g143g131g144g139g131g481g3g22g142g145g152g131g141g139g131g481g3g22g142g145g152g135g144g139g131g481g3g22g146g131g139g144g481g3g22g153g135g134g135g144g481g3g22g153g139g150

21、g156g135g148g142g131g144g134g481g3g23g151g148g141g135g155g3g131g144g134g3g24g144g139g150g135g134g3g14g139g144g137g134g145g143g484g3g3g3g3g3g8g24g21g18g19g8g4g17g3g6g18g16g16g12g23g23g8g8g3g9g18g21g3g22g23g4g17g7g4g21g7g12g29g4g23g12g18g17g3g6g18g16g12g23g50g3g8g24g21g18g19g50g8g17g3g7g8g3g17g18g21g1

22、6g4g15g12g22g4g23g12g18g17g3g8g24g21g18g19g34g12g22g6g11g8g22g3g14g18g16g12g23g8g8g3g9g111g21g3g17g18g21g16g24g17g10g3g3g3g3CEN-CENELECg3Management Centre: Avenue Marnix 17, B-1000 Brussels g825g3g884g882g883g888g3g6g8g17g3 g4g142g142g3g148g139g137g138g150g149g3g145g136g3g135g154g146g142g145g139g150

23、g131g150g139g145g144g3g139g144g3g131g144g155g3g136g145g148g143g3g131g144g134g3g132g155g3g131g144g155g3g143g135g131g144g149g3g148g135g149g135g148g152g135g134g3g153g145g148g142g134g153g139g134g135g3g136g145g148g3g6g8g17g3g144g131g150g139g145g144g131g142g3g16g135g143g132g135g148g149g484g3g21g135g136g48

24、4g3g17g145g484g3g8g17g3g883g884g887g885g486g885g483g884g882g883g888g3g8BS EN 1253-3:2016EN 1253-3:2016 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Evaluation of conformity 4 4.1 General 4 4.2 Type testing . 4 4.3 Factory production contr

25、ol . 4 Annex A (informative) Control by third party (third party control) . 8 A.1 General 8 A.2 Procedure of the third party control 8 A.3 Report by the third party . 9 A.4 Retesting 10 A.5 Non-conforming products . 10 Bibliography . 11 BS EN 1253-3:2016EN 1253-3:2016 (E) 3 European foreword This do

26、cument (EN 1253-3:2016) has been prepared by Technical Committee CEN/TC 165 “Waste water engineering”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Nove

27、mber 2016, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such pate

28、nt rights. This document supersedes EN 1253-3:1999. This is the third part in EN 1253, a series of standards relating to different types of floor gullies, roof drains and access covers for drainage systems inside buildings. The EN 1253 series under the main title Gullies for buildings actually consi

29、sts of the following parts: Part 1: Trapped floor gullies with a depth water seal of at least 50 mm; Part 2: Roof drains and floor gullies without trap; Part 3: Evaluation of conformity; Part 4: Access covers; Part 5: Gullies with light liquids closure. Since the latest edition of EN 1253-3 the most

30、 significant technical changes are the following: a) introduction of the new standards on trapped floor gullies with a depth of water seal of at least 50 mm (EN 1253-1) and roof drains and floor gullies without trap (EN 1253-2); b) amendment of items to be inspected as well as modification of freque

31、ncy of control for specific requirements. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Y

32、ugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1253-3:2016EN 1253-3:2016 (E) 4 1 Scope

33、 This European Standard specifies the requirements for evaluation of conformity for floor gullies, roof drains and access covers for buildings to ensure conformity of these products with EN 12531, EN 1253-2 and EN 12534. 2 Normative references The following documents, in whole or in part, are normat

34、ively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12531:2015, Gullies for buildings Part 1: Trapped floor gull

35、ies with a depth water seal of at least 50 mm EN 1253-2:2015, Gullies for buildings Part 2: Roof drains and floor gullies without trap EN 12534:2016, Gullies for buildings Part 4: Access covers 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1253-1, E

36、N 1253-2 and EN 12534 apply. 4 Evaluation of conformity 4.1 General Products manufactured in accordance with EN 12531, EN 12532 and EN 12534 will be subjected to the evaluation of conformity procedure as follows: a) type testing; b) factory production control. The control by a third party is recomme

37、nded. If third party control is carried out, this should be done in accordance with Annex A. The actual practice of third party control in the different countries may be maintained as long as the third party control in this standard retains its recommended character. 4.2 Type testing Complete drawin

38、gs of the products shall be available. Three production specimens shall be tested in accordance with EN 1253-1, EN 12532 and EN 12534 and shall comply with all the relevant requirements of EN 12531, EN 1253-2 and EN 12534. This procedure also applies if the design is subsequently amended structurall

39、y or if the material is changed. All subsequent amendments, whether structural or not, shall have the approval of the certification body, if required. 4.3 Factory production control The purpose of the factory production control is to constantly ensure that current production of floor gullies, roof d

40、rains and access covers is in conformity with the technical requirements of EN 12531, EN 1253-2, and EN 12534. BS EN 1253-3:2016EN 1253-3:2016 (E) 5 Suitable staff and independence of quality control of production are indispensable prerequisites. The facilities necessary for factory production contr

41、ol include the measuring and test equipment for the tests in accordance with EN 1253-1, EN 12532 and EN 12534. The factory production control shall at least cover the specific items listed in Tables 1, 2 and 3. The documentation shall include all steps of production from the incoming raw materials t

42、o the final product leaving the factory. The factory production control may be organized in accordance with EN ISO 9001. The manufacturer shall have at his disposal: an organization scheme with defined responsibilities; skilled personnel; all the necessary production facilities; all the necessary te

43、sting facilities. Furthermore, the manufacturer shall establish and maintain a quality plan in which process and final inspections are listed. Apart from the inspection aspect, the quality plan shall also contain the method and frequency of inspection and the documentation. Tables 1, 2 and 3 give a

44、model scheme of factory production control and list a minimum of specific items to be covered. Finally, the manufacturer shall establish and maintain written procedures for: document control; control of non-conforming products, their storage, handling and marking; dealing with complaints from custom

45、ers; calibration and control of measuring and testing equipment. BS EN 1253-3:2016EN 1253-3:2016 (E) 6 Table 1 Factory production control for trapped floor gullies with a depth water seal of at least 50 mm in accordance with EN 12531:2015 Items to be inspected Requirements Test methods Frequency of

46、control Appearance 4.1.2 Visual inspection - At start of production - Each production batchaDimensions 4.1.1 Measurement - At start of production - Each production batcha4.1.5 5.3.1 At start of production 4.1.3 Measurement At start of production 4.2.1 5.4.1 At start of production Materials 4.4 Manuf

47、acturers certification of compliance Each consignment Skirt membrane affixed to the gully 4.7.3.4 5.7.3 - At start of production - Random sampling in series production Marking Clause 7 Visual inspection Random sampling in series production Classification by loading strength 4.7.1 5.6 Each production

48、 batchaaThe size of a production batch and the number of specimens to be taken from the batch depend on the type of products, the material and the manufacturing process. Table 2 Factory production control for roof drains and floor gullies without trap in accordance with EN 12532:2015 Items to be ins

49、pected Requirements Test methods Frequency of control Appearance 4.1.2 Visual inspection - At start of production - Each production batchaDimensions 4.1.1 Measurement - At start of production - Each production batcha4.1.3 Measurement At start of production Materials 4.3 Manufacturers certification of compliance Each consignment Skirt membrane affixed to the gully 4.7.1 5.4.2 - At start of production - Random sampling in series production Marking Clause 7 Visual inspection Random sampling in series production Classification by loading s