DIN ISO 366-3-2010 Textile machinery and accessories - Reeds - Part 3 Dimensions and designation of metal reeds with double-spring baulk (ISO 366-3 2009)《纺织机械及附件 簧片 第3部分 带双弹簧止挡的金属簧.pdf

《DIN ISO 366-3-2010 Textile machinery and accessories - Reeds - Part 3 Dimensions and designation of metal reeds with double-spring baulk (ISO 366-3 2009)《纺织机械及附件 簧片 第3部分 带双弹簧止挡的金属簧.pdf》由会员分享，可在线阅读，更多相关《DIN ISO 366-3-2010 Textile machinery and accessories - Reeds - Part 3 Dimensions and designation of metal reeds with double-spring baulk (ISO 366-3 2009)《纺织机械及附件 簧片 第3部分 带双弹簧止挡的金属簧.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、July 2010 Translation by DIN-Sprachendienst.English price group 5No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 59

2、.120.30!$iDU“1703350www.din.deDDIN ISO 366-3Textile machinery and accessories Reeds Part 3: Dimensions and designation of metal reeds with double-springbaulk (ISO 366-3:2009)English translation of DIN ISO 366-3:2010-07Textilmaschinen und Zubehr Webbltter Teil 3: Doppel-Gussbund-Webbltter, Mae und Be

3、zeichnung (ISO 366-3:2009)Englische bersetzung von DIN ISO 366-3:2010-07Matriel pour lindustrie textile Peignes Partie 3: Dimensions et dsignation des peignes mtalliques ligature double (ISO 366-3:2009)Traduction anglaise de DIN ISO 366-3:2010-07SupersedesDIN ISO 366-3:1990-10www.beuth.deIn case of

4、doubt, the German-language original shall be considered authoritative.Document comprises 5 pages06.10 DIN ISO 366-3:2010-07 A comma is used as the decimal marker. Contents Page National foreword .2 1 Scope 3 2 Dimensions.3 3 Designation 3 National foreword This standard has been prepared by Technica

5、l Committee ISO/TC 72 “Textile machinery and accessories”, Subcommittee SC 3 “Machinery for fabric manufacturing including preparatory machinery and accessories” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Textil und Textil-maschinen (

6、Textilnorm) (Textiles and Textile Machinery Standards Committee (Textilnorm), Working Committee NA 106-02-07 AA Webereimaschinen. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. DIN shall not be held responsible for identifying an

7、y or all such patent rights. DIN ISO 366 consists of the following parts, under the general title Textile machinery and accessories Reeds: Part 1: Pitch bound reeds Dimensions Part 2: Dimensions and designation of metal reeds with plate baulk Part 3: Dimensions and designation of metal reeds with do

8、uble-spring baulk Part 4: Dimensions and designation of plastic-bound metal reeds Amendments This standard differs from DIN ISO 366-3:1990-10 as follows: a) The text of ISO 366-2:2009 has been adopted. b) A new Figure 2 has been added. c) A requirement for the perpendicularity tolerance of dents in

9、relation to base of reed has been specified. Previous editions DIN TEX 4600: 1928-10, 1929-09, 1935-05 DIN 64600: 1944-02, 1951-07, 1969-01, 1979-01 DIN ISO 366-3: 1990-10 2 Textile machinery and accessories Reeds 1 Scope This part of ISO 366 specifies the dimensions and designation of metal reeds w

10、ith double-spring baulk for weaving machines. 2 Dimensions The dimensions of metal reeds with double-spring baulk shown in Figure 1 and given in Table 1, and the tolerance of perpendicularity of dents according Figure 2, shall be met. 3 Designation The designation of metal reeds with double-spring b

11、aulk shall include the following information in the order given: a) “Metal reed with double-spring baulk”; b) reference to this part of ISO 366, i.e. ISO 366-3; c) inner height of the reed, e, in millimetres; d) overall height of the reed, h1, in millimetres; e) thickness of the reed baulk, d, in mi

12、llimetres; f) width of the dents of the reed, b, in millimetres; g) type of steel used for the dents of the reed, i.e. plain or stainless. EXAMPLE A metal reed with double-spring baulk of total height h1= 150 mm, of thickness of reed baulk d = 8 mm, and having dents of width b = 4 mm, made of stainl

13、ess steel, is designated as follows: Metal reed with double-spring baulk ISO 366-3 - 150 8 4 stainless steel Part 3: Dimensions and designation of metal reeds with double-spring baulk DIN ISO 366-3:2010-07 3 Key B overall width of reed BNusable width b width of dents of reed d thickness of reed baul

14、k (approximate value, depends on the thickness or diameter of the wire) e inner height of reed h1total height of reed f width of end piece Figure 1 Metal reed with double-spring baulk Table 1 Dimensions of metal reeds with double-spring baulk Dimensions in millimetres Width of dents of reed b 3 4 (5

15、) 6 Thickness of reed baulk d Total height of reed h16,5 8 (9) 10 110 120 130 140 150 160 NOTE The grey table elements show the dimensions recommended for metal reed with plate baulk. DIN ISO 366-3:2010-07 4 Key e inner height of reed h1total height of reed s thickness of dents t distance of dents Figure 2 Tolerance of perpendicularity of dents in relation to base of reed DIN ISO 366-3:2010-07 5