DIN EN ISO 8623-2015 Tall-oil fatty acids for paints and varnishes - Test methods and characteristic values (ISO 8623 2015) German version EN ISO 8623 2015《色漆和清漆用松焦油脂肪酸 测试方法和特征值(IS.pdf

《DIN EN ISO 8623-2015 Tall-oil fatty acids for paints and varnishes - Test methods and characteristic values (ISO 8623 2015) German version EN ISO 8623 2015《色漆和清漆用松焦油脂肪酸 测试方法和特征值(IS.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 8623-2015 Tall-oil fatty acids for paints and varnishes - Test methods and characteristic values (ISO 8623 2015) German version EN ISO 8623 2015《色漆和清漆用松焦油脂肪酸 测试方法和特征值(IS.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、December 2015 English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 87.060.20!%JwM“2398442www.din.d

2、eDIN EN ISO 8623Tall-oil fatty acids for paints and varnishes Test methods and characteristic values (ISO 8623:2015);English version EN ISO 8623:2015,English translation of DIN EN ISO 8623:2015-12Talll-Fettsuren fr Beschichtungsstoffe Prfung und Kennwerte (ISO 8623:2015);Englische Fassung EN ISO 862

3、3:2015,Englische bersetzung von DIN EN ISO 8623:2015-12Acides gras de tall-oil pour peintures et vernis Mthodes dessai et valeurs charactristiques (ISO 8623:2015);Version anglaise EN ISO 8623:2015,Traduction anglaise de DIN EN ISO 8623:2015-12SupersedesDIN EN ISO 8623:2011-02www.beuth.deDocument com

4、prises 18 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.01.16DIN EN ISO 8623:2015-12 2 A comma is used as the decimal marker. National foreword This document (EN ISO 8623:2015) has been prepared by Technical Committee ISO/TC

5、35 “Paints and varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Beschichtungsstoffe und Beschichtungen (DIN Standards Committee Coatings and Coating Mate

6、rials), Working Committee NA 002-00-02 AA Lackrohstoffe. The method for the determination of unsaponifiable matter (diethyl ether method) as in ISO 150:1980 has been adopted as a standard method by the International Union of Pure and Applied Chemistry (IUPAC) in the fifth edition of its “Standard me

7、thods for the analysis of oils, fats and derivatives”, Section “Oils and fats”. It corresponds to the method previously specified in DIN 55934:1982-11, 14.3. The formula for calculating the rosin acids content (see B.5) includes a factor of 1,042 to correct for the slight esterification of rosin aci

8、ds, and a factor of 0,1 to correct for the unesterified acids, in accordance with the Scandinavian technical rule SCAN-T 14:78. Because the reference values for the composition of tall-oil fatty acids given in DIN 55961:1993-03 have not been included in ISO 8623, they are included in the informative

9、 National Annex to the present standard. However, the content for some fatty acids has not been given, as there has not yet been enough experience with them. For example, limiting the all-cis-9,12,15-octadecatrienoic acid content to less than 1 % in order to reduce yellowing is currently under consi

10、deration. If this seems necessary, e.g. due to the results of investigations, then this content can be specially agreed. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 150 DIN EN ISO 150 ISO 383 DIN 12242-1 ISO 2114 DIN EN ISO 2114 ISO

11、 2811 (all parts) DIN EN ISO 2811 (all parts) ISO 3681 DIN EN ISO 3681 ISO 3696 DIN EN ISO 3696 ISO 3961 DIN EN ISO 3961 ISO 4630 DIN EN ISO 4630 Amendments This standard differs from DIN EN ISO 8623:2011-02 as follows: a) the former requirements have been changed to information on characteristic va

12、lues; b) the data for unsaponifiable matter content has been changed from mass fraction of max. 2 % to max. 5 %; DIN EN ISO 8623:2015-12 3 c) the method for the determination of the unsaponifiable matter (diethyl ether method) has been taken from ISO 150, 1980 edition, because it is no longer includ

13、ed in the current edition of ISO 150, i.e. ISO 150:2006; d) the concentration of phenolphthalein indicator solution has been changed from 10 g/l in ethanol to 5 g/l in ethanol or in a 1:1 ethanol/water mixture. Previous editions DIN 55961: 1971-08, 1974-12, 1984-10, 1993-03 DIN ISO 8623: 1998-08 DIN

14、 EN ISO 8623: 2011-02 DIN EN ISO 8623:2015-12 4 National Annex NA (informative) Reference values for the composition of tall-oil fatty acids Table NA.1 Reference values for the composition of tall-oil fatty acids Fatty acid Content % (mass fraction) Palmitic acid C 16:0 0,5 to 1,5 Stearic acid C 18:

15、0 0,5 to 2 Oleic acid C 18:1 27 to 38 Linoleic acid C 18:2a42 to 55 5,9,12-octadecatrienoic acid C 18:3a10 to 15 Other fatty acids 3 to 4 aand isomers DIN EN ISO 8623:2015-12 5 National Annex NB (informative) Bibliography DIN 12242-1, Laboratory glassware Interchangeable conical ground joints Dimens

16、ions, tolerances DIN 55934:1980-01, Binders for paints and varnishes Linseed oil and related products Methods of test*)DIN EN ISO 150, Raw, refined and boiled linseed oil for paints and varnishes Specifications and methods of test DIN EN ISO 2114, Plastics (polyester resins) and paints varnishes (bi

17、nders) Determination of partial acid value and total acid value DIN EN ISO 2811, Paints and varnishes Determination of density (all parts) DIN EN ISO 3681, Binders for paints and varnishes Determination of saponification value Titrimetric method DIN EN ISO 3961, Animal and vegetable fats and oils De

18、termination of iodine value DIN EN ISO 4630, Clear liquids Estimation of colour by the Gardner colour scale DIN ISO 3696, Water for analytical laboratory use Specification and test methods SCAN-T 14:78, Tall oils Resin acids*)*)Withdrawn; replaced by DIN EN ISO 150. *)Obtainable from Secretariat, Sc

19、andinavian Pulp, Paper and Board Testing Committee, Box 5604, S-11486 Stockholm. DIN EN ISO 8623:2015-12 6 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 8623 September 2015 ICS 87.060.99 Supersedes EN ISO 8623:2010English Version Tall-oil fatty acids for p

20、aints and varnishes - Test methods and characteristic values (ISO 8623:2015) Acides gras de tall-oil pour peintures et vernis - Mthodes dessai et valeurs caractristiques Talll-Fettsuren fr Beschichtungsstoffe - Prfverfahren und Kennwerte (ISO 8623:2015) This European Standard was approved by CEN on

21、31 July 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be

22、 obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to t

23、he CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ir

24、eland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Ce

25、ntre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 8623:2015 E(ISO 8623:2015) Foreword .Introduction .1 Scope .2 Normative references 3 Test methods and characteristic values .Annex A (

26、normative) Determination of unsaponifiable matter (Diethyl ether method) Annex B (normative) Determination of rosin acid content .Contents PageEuropean foreword. . 3 EN ISO 8623:2015 (E) 245666710DIN EN ISO 8623:2015-12 European foreword This document (EN ISO 8623:2015) has been prepared by Technica

27、l Committee ISO/TC 35 “Paints and varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at

28、the latest by March 2016, and conflicting national standards shall be withdrawn at the latest by March 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or a

29、ll such patent rights. This document supersedes EN ISO 8623:2010. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Es

30、tonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice Th

31、e text of ISO 8623:2015 has been approved by CEN as EN ISO 8623:2015 without any modification. EN ISO 8623:2015 (E) 3DIN EN ISO 8623:2015-12 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of prepar

32、ing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in li

33、aison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Di

34、rectives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that

35、some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent decl

36、arations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information a

37、bout ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 35, Paints and varnishes, Subcommittee SC 10, Test methods for binders for paints and varnishes.This sec

38、ond edition cancels and replaces the first edition (ISO 8623:1997), which has been technically revised with the following changes: the former requirements were changed to information on characteristic values; the data for unsaponifiable matter content was changed from mass fraction of max. 2,5 % to

39、max. 5 %; the method for the determination of the unsaponifiable matter (diethyl ether method) was implemented from the 1980 edition of ISO 150 because it is no longer included in the actual revision of ISO 150, i.e. ISO 150:2006; the concentration of phenolphthalein indicator solution was changed f

40、rom 10 g/l in ethanol to 5 g/l in ethanol or in a 1:1 ethanol/water mixture.EN ISO 8623:2015 (E) 4DIN EN ISO 8623:2015-12 IntroductionNormally, requirements are agreed between the interested parties. So with this new edition, this International Standard no longer specifies requirements but only test

41、 methods and gives information on characteristic values for tall-oil fatty acids.EN ISO 8623:2015 (E) 5DIN EN ISO 8623:2015-12 1 ScopeThis International Standard specifies test methods and gives information on characteristic values for distilled tall-oil fatty acids for paints and varnishes.2 Normat

42、ive referencesThe following documents, in whole or in part, are normally referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) appli

43、es.ISO 383, Laboratory glassware Interchangeable conical ground jointsISO 2114, Plastics (polyester resins) and paints and varnishes (binders) Determination of partial acid value and total acid valueISO 2811 (all parts), Paints and varnishes Determination of densityISO 3681, Binders for paints and v

44、arnishes Determination of saponification value Titrimetric methodISO 3696, Water for analytical laboratory use Specification and test methodsISO 3961, Animal and vegetable fats and oils Determination of iodine valueISO 4630, Clear liquids Estimation of colour by the Gardner colour scale3 Test method

45、s and characteristic valuesTest methods and typical characteristic values for tall-oil fatty acids for paints and varnishes are given in Table 1.Table 1 Test methods and characteristic values for tall-oil fatty acidsProperty Characteristic value Test methodDensityat 20 C g/cm30,900 to 0,910ISO 2811a

46、t 23 C g/cm30,898 to 0,908Colour max. 5 ISO 4630Acid value mg KOH/g min. 192 ISO 2114Saponification value mg KOH/g min. 193 ISO 3681Iodine value g Iodine /100 g min. 125 ISO 3961Unsaponifiable matter % (mass fraction) max. 5 Annex ARosin acid content % (mass fraction) max. 2,5 Annex BEN ISO 8623:201

47、5 (E) 6DIN EN ISO 8623:2015-12 Annex A (normative) Determination of unsaponifiable matter (Diethyl ether method)A.1 GeneralThis test method is applicable to all fats. It is, however, only approximate for certain fats having high content of unsaponifiable matter.A.2 Terms and definitionsA.2.1unsaponi

48、fiable mattersubstances soluble in the fat, which after saponification are insoluble in water but soluble in the solvent used for the determinationNote 1 to entry It includes lipids of natural origin such as sterols, alcohols and hydrocarbons as well as any foreign organic matter non-volatile at 100

49、 C (mineral oils) which may be present.A.3 ApparatusUse ordinary laboratory apparatus and glassware, together with the following:A.3.1 150 ml flask fitted with a reflux condenser.A.3.2 500 ml separating funnels.A.3.3 Oven, regulated at (103 2) C.A.4 ReagentsDuring the analysis, use only reagents of recognized analytical grade and only water of at least grade 3 as defined in ISO 3696.A.4.1 Aqueous solution of potassium hydroxide, c (KOH) = 28 g/l.A.4.2 Ethanolic solution of potass