DIN EN ISO 4028-2004 Hexagon socket set screws with dog point (ISO 4028 2003) German version EN ISO 4028 2003《内六角圆柱端紧定螺钉》.pdf

《DIN EN ISO 4028-2004 Hexagon socket set screws with dog point (ISO 4028 2003) German version EN ISO 4028 2003《内六角圆柱端紧定螺钉》.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 4028-2004 Hexagon socket set screws with dog point (ISO 4028 2003) German version EN ISO 4028 2003《内六角圆柱端紧定螺钉》.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 21.060.10Hexagon socket set screws with dog point(ISO 4028 : 2003)English version of DIN EN ISO 4028Gewindestifte mit Innensechskant und Zapfen (ISO 4028 : 2003)European Standard EN ISO 4028 : 2003 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis stand

2、ard has been published in accordance with a decision taken by CEN/TC 185 Threaded and non-threaded mechanical fasteners and accessories, to adopt, without alteration, International StandardISO 4028 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss

3、 MechanischeVerbindungselemente (Fasteners Standards Committee), Technical Committee Schrauben mit Innenantrieb.The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are asfollows:ISO Standard DIN StandardISO 225 DIN EN 20225ISO 261 DIN ISO 261ISO 898-5 DIN

4、 EN ISO 898-5ISO 965-2 DIN ISO 965-2ISO 965-3 DIN ISO 965-3ISO 3269 DIN EN ISO 3269ISO 3506-3 DIN EN ISO 3506-3ISO 4042 DIN EN ISO 4042ISO 4759-1 DIN EN ISO 4759-1ISO 6157-1 DIN EN 26157-1ISO 8839 DIN EN 28839ISO 10683 DIN EN ISO 10683ISO 23429 DIN EN ISO 23429DEUTSCHE NORM May 2004DIN EN ISO 4028 N

5、o part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).English price group 7www.din.dewww.beuth.de9568526Continued overleaf.Doc

6、ument comprises 9 pages.08.04G4G15G62G91G32G5Supersedes DIN 915,December 1980 edition.AmendmentsDIN 915, December 1980 edition, has been superseded by the specifications of EN ISO 4028, which is identicalto ISO 4028.Previous editionsDIN 437: 1922-10, 1925-04; DIN 585-1: 1928-07; DIN 585-2: 1928-07;

7、DIN 585-3: 1929-07;DIN 915: 1933-10, 1948-01, 1953-06, 1959-09, 1969-09, 1973-01, 1980-12.National Annex NAStandards referred to(and not included in Normative references and Annex ZA)DIN EN 20225 Bolts, screws, studs and nuts Symbols and designations for dimensioning(ISO 225 : 1983)DIN EN 26157-1 Fa

8、steners Surface discontinuities Part 1: Bolts, screws and studs for generalrequirements (ISO 6157-1 : 1988)DIN EN 28839 Mechanical properties of fasteners Bolts, screws, studs and nuts made of non-ferrousmetals (ISO 8839 : 1986)DIN EN ISO 898-5 Mechanical properties of fasteners made of carbon steel

9、 and alloy steel Part 5: Setscrews and similar threaded fasteners not under tensile stresses (ISO 898-5 : 1998)DIN EN ISO 3269 Fasteners Acceptance inspection (ISO 3269 : 2000)DIN EN ISO 3506-3 Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screwsand similar faste

10、ners not under tensile stress (ISO 3506-3 : 1997)DIN EN ISO 4042 Fasteners Electroplated coatings (ISO 4042 : 1999)DIN EN ISO 4759-1 Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, Band C (ISO 4759-1 : 2000)DIN EN ISO 10683 Fasteners Non-electrolytically applied zinc

11、 flake coatings (ISO 10683 : 2000)DIN EN ISO 23429 Gauging of hexagon sockets (ISO 23429 : 2004)DIN ISO 261 ISO general purpose metric screw threads General plan (ISO 261 : 1998)DIN ISO 965-2 ISO general purpose metric screw threads Tolerances Part 2: Limits of sizes for generalpurpose external and

12、internal screw threads Medium quality (ISO 965-2 : 1998)DIN ISO 965-3 ISO general purpose metric screw threads Tolerances Part 3: Deviations forconstructional screw threads (ISO 965-3 : 1998)Page 2DIN EN ISO 4028 : 2004-05English versionICS 21.060.10Hexagon socket set screws with dog point(ISO 4028

13、: 2003) 2003. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 4028 : 2003 EGewindestifte mit Innensechskant undZapfen (ISO 4028 : 2003)This European Standard was approved by CEN on 2003-11-04.CEN members are bound to comply with

14、the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or

15、to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN m

16、embers are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland,Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia,Spain, Sweden, Switzerland, and the United Kingdom.EN ISO 4028December 2003Manag

17、ement Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungVis sans tte six pans creux, tton(ISO 4028 : 2003)Page 2EN ISO 4028 : 2003ForewordInternational StandardISO 4028 : 2003 Hexagon socket set screws with do

18、g point,which was prepared by ISO/TC 2 Fasteners of the International Organization for Standardization, has beenadopted by Technical Committee CEN/TC 185 Threaded and non-threaded mechanical fasteners andaccessories, the Secretariat of which is held by DIN, as a European Standard.This European Stand

19、ard shall be given the status of a national standard, either by publication of an identical textor by endorsement, and conflicting national standards withdrawn, by June 2004 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing co

20、untries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland, and theUnited Kingdom.Endorsement notice

21、The text of the International Standard ISO 4028 : 2003 was approved by CEN as a European Standard withoutany modification.NOTE: Normative references to international publications are listed in Annex ZA (normative).Page 3EN ISO 4028 : 2003Page 4EN ISO 4028 : 2003Page 5EN ISO 4028 : 2003Page 6EN ISO 4028 : 2003Page 7EN ISO 4028 : 2003