DIN EN ISO 13534-2001 Petroleum and natural gas industries - Drilling and production equipment - Inspection maintenance repair and remanufacture of hoisting equipment (ISO 13534 20.pdf

《DIN EN ISO 13534-2001 Petroleum and natural gas industries - Drilling and production equipment - Inspection maintenance repair and remanufacture of hoisting equipment (ISO 13534 20.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 13534-2001 Petroleum and natural gas industries - Drilling and production equipment - Inspection maintenance repair and remanufacture of hoisting equipment (ISO 13534 20.pdf（15页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 75.180.10Erdl- und Erdgasindustrie Bohr- und Frdereinrichtungen Inspektion, Instandhaltung, Instandsetzungund Wiederaufbereitung von Hebeeinrichtungen (ISO 13534 : 2000)European Standard EN ISO 13534 : 2000 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordT

2、his standard has been published in accordance with a decision taken by CEN/TC 12 to adopt, withoutalteration, International Standard ISO 13534 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Erdl-und Erdgasgewinnung (Petroleum and Natural Gas In

3、dustries Standards Committee), Technical CommitteeBohr- und Frdereinrichtungen.Ref. No. DIN EN ISO 13534 : 2001-09English price group 10 Sales No. 111012.01DEUTSCHE NORM September 2001EN ISO 13534Continued overleaf.EN comprises 13 pages. No part of this standard may be reproduced without the prior p

4、ermission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Petroleum and natural gas industries Drilling andproduction equipmentInspection, maintenance, repair and remanufacture of hoisting e

5、quipment(ISO 13534 : 2000)English version of DIN EN ISO 13534English versionICS 75.018.10Descriptors:Petroleum and natural gas industries Drilling andproduction equipmentInspection, maintenance, repair and remanufacture ofhoisting equipment(ISO 13534 : 2000) 2000. CEN All rights of exploitation in a

6、ny form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 13534 : 2000 EErdl- und Erdgasindustrie Bohr- und Frdereinrichtungen Inspektion, Instandhaltung,Instandsetzung und Wiederaufberei-tung von Hebeeinrichtungen(ISO 13534 : 2000)This European Standard was approved by CEN

7、 on 2000-12-01.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be

8、obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Cent

9、re hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.EN

10、ISO 13534December 2000Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr Normung|Industries du ptrole et du gaznaturel Equipement de forageet de production Vrification,maintenance, rparation et fabrication

11、partir de matriaux recycls dumatriel de levage (ISO 13534 : 2000)Page 2EN ISO 13534 : 2000ForewordInternational StandardISO 13534 : 2000 Petroleum and natural gas industries Drilling and production equipment Inspection,maintenance, repair and remanufacture of hoisting equipment,which was prepared by

12、 ISO/TC 67 Materials, equipment and offshore structures for petroleum and natural gasindustries of the International Organization for Standardization, has been adopted by Technical CommitteeCEN/TC 12 Materials, equipment and offshore structures for petroleum and natural gas industries, theSecretaria

13、t of which is held by AFNOR, as a European Standard.This European Standard shall be given the status of a national standard, either by publication of an identical textor by endorsement, and conflicting national standards withdrawn, by June 2001 at the latest.In accordance with the CEN/CENELEC Intern

14、al Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerl

15、and, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 13534 : 2000 was approved by CEN as a European Standard withoutany modification.2334445556667711111111111112121212121212121313Page 3EN ISO 13534 : 2000Page 4EN ISO 13534 : 2000Page 5EN ISO 13534 : 2000Page 6EN ISO 13534 : 2000Page 7EN ISO 13534 : 2000Page 8EN ISO 13534 : 2000Page 9EN ISO 13534 : 2000Page 10EN ISO 13534 : 2000Page 11EN ISO 13534 : 2000Page 12EN ISO 13534 : 2000Page 13EN ISO 13534 : 2000