DIN EN 16297-2-2013 Pumps - Rotodynamic pumps - Glandless circulators - Part 2 Calculation of energy efficiency index (EEI) for standalone circulators German version EN 16297-2 201.pdf

《DIN EN 16297-2-2013 Pumps - Rotodynamic pumps - Glandless circulators - Part 2 Calculation of energy efficiency index (EEI) for standalone circulators German version EN 16297-2 201.pdf》由会员分享，可在线阅读，更多相关《DIN EN 16297-2-2013 Pumps - Rotodynamic pumps - Glandless circulators - Part 2 Calculation of energy efficiency index (EEI) for standalone circulators German version EN 16297-2 201.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、April 2013 Translation by DIN-Sprachendienst.English price group 7No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 2

2、3.080!*“7615958www.din.deDDIN EN 16297-2Pumps Rotodynamic pumps - Glandless circulators Part 2: Calculation of energy efficiency index (EEI) for standalonecirculators;English version EN 16297-2:2012,English translation of DIN EN 16297-2:2013-04Pumpen Kreiselpumpen - Umwlzpumpen in Nassluferbauart Te

3、il 2: Berechnung des Energieeffizienzindexes (EEI) von externen Umwlzpumpen;Englische Fassung EN 16297-2:2012,Englische bersetzung von DIN EN 16297-2:2013-04Pompes Pompes rotodynamiques - Circulateurs sans presse-toupe Partie 2: Calcul de lindice defficacit nergtique (EEI) pour les circulateursindpe

4、ndants;Version anglaise EN 16297-2:2012,Traduction anglaise de DIN EN 16297-2:2013-04Together with DIN EN16297-1:2013-04,supersedesDIN EN 1151-1:2006-11 andDIN EN 1151-1 Corrigendum1:2008-06www.beuth.deDocument comprises 10 pagesIn case of doubt, the German-language original shall be considered auth

5、oritative.04.13DIN EN 16297-2:2013-04 2 A comma is used as the decimal marker. National foreword This standard specifies the procedure for calculating the energy efficiency index of standalone circulators designed for use in heating systems or cooling distribution systems. Verification of the energy

6、 efficiency index is necessary to meet the requirements of Commission Regulation (EC) No 641/2009. This document (EN 16297-2:2012) has been prepared by Technical Committee CEN/TC 197 “Pumps” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss

7、 Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-11-01 AA Kreiselpumpen of Section Kreiselpumpen. Representatives of manufacturers and users of glandless circulators, and of the employers liability insurance associations contributed to this standard. This standard

8、 contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC in conjunction with Directive 2009/125/EC and Commission Regulation (EC) No 641/2009, and which apply to machines that are either first placed on the market or commission

9、ed within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of these directives. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume co

10、mpliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in Clause 2 and in the Bibliography of the EN have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. For the International Standards whic

11、h have not been published as DIN ISO Standards with the same number, there are no national standards available. Amendments This standard differs from DIN EN 1151-1:2006-11 and DIN EN 1151-1 Corrigendum 1:2008-06 as follows: a) the scope now includes electrically controlled pumps; b) the standard has

12、 been subdivided; c) the procedure for calculating the energy efficiency index (EEI) of standalone circulators has been included to meet the requirements of the Ecodesign Directive. Previous editions DIN EN 1151-1: 1999-05, 2006-11 DIN EN 1151-1 Corrigendum 1: 2008-06 EUROPEAN STANDARD NORME EUROPEN

13、NE EUROPISCHE NORM EN 16297-2 October 2012 ICS 23.080 Supersedes EN 1151-1:2006English Version Pumps - Rotodynamic pumps - Glandless circulators - Part 2: Calculation of energy efficiency index (EEI) for standalone circulators Pompes - Pompes rotodynamiques - Circulateurs sans presse-toupe - Partie

14、2: Calcul de lindice defficacit nergtique (EEI) pour les circulateurs indpendants Pumpen - Kreiselpumpen - Umwlzpumpen in Nassluferbauart - Teil 2: Berechnung des Energieeffizienzindexes (EEI) von externen Umwlzpumpen This European Standard was approved by CEN on 18 August 2012. CEN members are boun

15、d to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CE

16、N-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre h

17、as the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L

18、uxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012

19、CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16297-2:2012: EEN 16297-2:2012 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definitions .54 Symbols and units .55 Performance requirements

20、 and safety requirements 56 Calculation of energy efficiency index (EEI) .56.1 General conditions 56.2 Procedure .66.2.1 Load profile for calculation of average compensated power input, PLavg66.2.2 Part load operating points 66.2.3 Calculation of average compensated power input, PL,avg.66.2.4 Calibr

21、ation factor .66.2.5 Calculation of energy efficiency index (EEI), EEI.6Annex ZA (informative) Relationship between this European Standard and the requirements of Commission Regulation (EC) No 641/2009 .8DIN EN 16297-2:2013-04 EN 16297-2:2012 (E) 3 Foreword This document (EN 16297-2:2012) has been p

22、repared by Technical Committee CEN/TC 197 “Pumps”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2013, and conflicting national standards shall b

23、e withdrawn at the latest by April 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a manda

24、te given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This document, together with EN 16297-1:2012, super

25、sedes EN 1151-1:2006. EN 16297 consists of the following parts under the general title Pumps Rotodynamic pumps Glandless circulators: Part 1: General requirements and procedures for testing and calculation of energy efficiency index (EEI); Part 2: Calculation of energy efficiency index (EEI) for sta

26、ndalone circulators; Part 3: Energy efficiency index (EEI) for circulators integrated in products. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cy

27、prus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the Unit

28、ed Kingdom. DIN EN 16297-2:2013-04 EN 16297-2:2012 (E) 4 Introduction The European Standard has been prepared under mandate M/469 EN of 22 June 2010 given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Requirements of the EU Directive 20

29、05/32/EC of 6 July 2005 and Commission Regulation (EC) 641/2009 of 22 July 2009 by describing procedures for measurement and calculation of hydraulic power, power consumption, and energy efficiency index of circulators. DIN EN 16297-2:2013-04 EN 16297-2:2012 (E) 5 1 Scope This European Standard spec

30、ifies the procedure for calculating the energy efficiency index (EEI) of standalone circulators. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited ap

31、plies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 809:1998+A1 :2009, Pumps and pump units for liquids Common safety requirements EN 16297-1:2012, Pumps Rotodynamic pumps Glandless circulators Part 1: General requirements and procedure

32、s for testing and calculation of energy efficiency index (EEI) EN 60335-2-51:2003, Household and similar electrical appliances Safety Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations 3 Terms and definitions For the purpose of this docume

33、nt, the terms and definitions given in EN 16297-1:2012 and the following apply. 3.1 standalone circulator circulator designed to operate independently from a product that generates and/or transfers heat Note 1 to entry For the purpose of this document, the term circulator is used in the following in

34、 place of standalone circulator. 3. 2 differential pressure controlled circulator circulator adapting in time the differential pressure to the demand by varying the speed 4 Symbols and units For the purpose of this document, the symbols, quantities and units given in Table 1 of EN 16297-1:2012 apply

35、. 5 Performance requirements and safety requirements The requirements of EN 16297-1, EN 809 and EN 60335-2-51 apply. 6 Calculation of energy efficiency index (EEI) 6.1 General conditions Standalone circulators with pump housing shall be measured as a complete unit. DIN EN 16297-2:2013-04 EN 16297-2:

36、2012 (E) 6 Standalone circulators without pump housing shall be measured in pump housing identical to the pump housing in which they are intended to be used. 6.2 Procedure 6.2.1 Load profile for calculation of average compensated power input, PLavgThe load profile for calculation of average compensa

37、ted power input, PLavg, for standalone circulators is shown in Table 1. Table 1 Load profile for calculation of average compensated power input, PL,avgQ in % of Q100%Time in % of annual operating hours 100 L1 = 6 75 L2 1550 L3 = 3525 L4 44 6.2.2 Part load operating points Part load operating points

38、are measured by using following procedure: a) Calculate Hrefat each part load point on the reference control curve (see Figure 4 in EN 16297-1:2012). b) Select and set a control curve (control curve or non-controlled curve) which is as close as possible to the reference control curve and reaches poi

39、nt (Q100%, H100%) within the tolerance of H100%. c) Change the system curve to reach the part load operating points. 6.2.3 Calculation of average compensated power input, PL,avgThe average compensated power input, PL,avg, is calculated as: PP PPPPP P= + + += + + +L,avg 1 L,100% 2 L,75% 3 L,50% 4 L,2

40、5%L,100% L,75% L,50% L,25%L LLL0,06 0,15 0,35 0,44PL,avgmust be based on measurements from 100 % flow to 0 % flow or as average of PL,avgbased on data measured from 0% flow to 100% flow and 100 % flow to 0 % flow. If more than one control curve reaches the point (Q100%, H100%) within the tolerance o

41、f H100%, it is recommended to make the calculation on more than one curve and use the curve which gives the lowest PL,avg. 6.2.4 Calibration factor The calibration factor for standalone circulators isCC= =20%xx%0,49 . 6.2.5 Calculation of energy efficiency index (EEI), EEIThe energy efficiency index

42、 (EEI), EEI, for standalone circulators is calculated as: DIN EN 16297-2:2013-04 EN 16297-2:2012 (E) 7 L,avg L,avgEEI 20%ref ref0,49PPC = It is permissible to substitute the parameter EEIby the abbreviation EEI in data sheets, manuals, leaflets, brochures etc. DIN EN 16297-2:2013-04 EN 16297-2:2012

43、(E) 8 Annex ZA (informative) Relationship between this European Standard and the requirements of Commission Regulation (EC) No 641/2009 This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of confo

44、rming to requirements Commission Regulation (EC) No 641/2009 of 22 July 2009: implementing Directive 2005/32/EC1of the European Parliament and of the Council with regard to ecodesign requirements for glandless standalone circulators and glandless circulators integrated in products Once this standard

45、 is cited in the Official Journal of the European Union under that Commission Regulation , compliance with the clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding requirements of that and associated

46、 EFTA regulations. Table ZA.1 Correspondence between this European Standard and Commission Regulation (EC) No 641/2009 Clauses and sub-clauses of this EN Requirements of CommissionRegulation (EC) No 641/2009 Qualifying remarks/Notes Part 1: 6.2.1 Annex II, 2., 3. Calculation of Phyd Part 1: 6.2.2 An

47、nex II, 2., 4. Calculation of Pref Part 1: 6.2.4 Annex II, 2., 5. Reference control curve Part 1: 6.2.9 Annex II, 2., 9. Calculation of EEI Part 2: 6.2.5 Annex II, 2., 9. Calculation of EEI Part 3: 6.2.5 Annex II, 2., 9. Calculation of EEI WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. 1The Directive was replaced by the Directive 2009/125/EC. DIN EN 16297-2:2013-04