DIN EN 15942-2012 Sustainability of construction works - Environmental product declarations - Communication format business-to-business German version EN 15942 2011《建造工程持续性 环保产品声明 .pdf

《DIN EN 15942-2012 Sustainability of construction works - Environmental product declarations - Communication format business-to-business German version EN 15942 2011《建造工程持续性 环保产品声明 .pdf》由会员分享，可在线阅读，更多相关《DIN EN 15942-2012 Sustainability of construction works - Environmental product declarations - Communication format business-to-business German version EN 15942 2011《建造工程持续性 环保产品声明 .pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、January 2012 Translation by DIN-Sprachendienst.English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 35.240.99; 91.040.99!$y+G“1860836www.din.deDDIN EN 15942Sustainability of construction works Environmental product declarations Communication format business-to-businessEnglish translation of DIN EN 15942:2012-01Nachhaltigkeit von Bauwerken Umweltproduktdeklarationen Kommunikationsformate zwischen

3、 UnternehmenEnglische bersetzung von DIN EN 15942:2012-01Contribution des ouvrages de construction au dveloppement durable Dclarations environnementales des produits Formats de communication entre professionnelsTraduction anglaise de DIN EN 15942:2012-01www.beuth.deDocument comprises pagesIn case of

4、 doubt, the German-language original shall be considered authoritative.2001.12 DIN EN 15942:2012-01 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee CEN/TC 350 “Sustainability of construction works” (Secretariat: AFNOR, France). The re

5、sponsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-01-31 AA Nachhaltiges Bauen. National Annex NA (informative) DIN EN 15942:2011 uses a model for describing the product life cycle. This mo

6、del is presented in Tables A.2, A.3, A.4 and A.5 to show the structure of information to be attributed to each stage in the life cycle. Maintenance is attributed to the use stage. The classification of maintenance activities and the terminology used in this standard should be modified to reflect the

7、 principles commonly used in Germany. The usual German classification of maintenance activities and the relevant terminology are given in: DIN 31051:2003, Fundamentals of maintenance DIN EN 13306:2010, Maintenance Maintenance terminology (Trilingual version) This National Annex is oriented towards D

8、IN 31051. When applying the present standard in Germany, the following interpretation of life cycle phases and information modules (German terms) applies: B2 (maintenance) WartungA1)B3 (repair) Instandsetzung B4 (replacement) Ersatz i.S.V. AustauschA2)B5 (refurbishment) Verbesserung A1) In German, W

9、artung is a partial aspect of preventative maintenance. A2) Issues regarding Ersatz (replacement) are not dealt with in DIN 31051. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15942 October 2011 ICS 35.240.99; 91.040.99 English Version Sustainability of construction works - Environmental pro

10、duct declarations - Communication format business-to-business Contribution des ouvrages de construction au dveloppement durable - Dclarations environnementales des produits - Formats de communication entre professionnels Nachhaltigkeit von Bauwerken - Umweltproduktdeklarationen - Kommunikationsforma

11、te zwischen Unternehmen This European Standard was approved by CEN on 13 August 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists

12、and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under th

13、e responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germ

14、any, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG

15、 Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15942:2011: EContents Page Foreword 3Introduction .41 Scope 42 Normative references 43 Terms and definitions .44 Symbols and

16、 abbreviations 55 General principles56 Requirements for EPD communication format .67 Information Transfer Matrix 67.1 General 67.2 Aggregation of information 7Annex A (normative) Master ITM .8Annex B (normative) Information modules according to FprEN 15804:2011, Figure 1 17Bibliography . 18EN 15942:

17、2011 (E) DIN EN 15942:2012-01 2 Foreword This document (EN 15942:2011) has been prepared by Technical Committee CEN/TC 350 “Sustainability of construction works”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication

18、 of an identical text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at the latest by March 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not

19、be held responsible for identifying any or all such patent rights. This document, supports the use of Product Category Rules (FprEN 15804:2011) for construction products. Together they are used as the means for arriving Environmental Product Declarations (EPD). According to the CEN/CENELEC Internal

20、Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg

21、, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 15942:2011 (E) DIN EN 15942:2012-01 3 Introduction The aim of this European Standard is to harmonise the way in which environmental product declarations (EPD) are commun

22、icated in Europe. It is relevant to the use of the EPD in the building chain where materials and products are assembled into new products and assemblies, each with their own EPD. This European Standard will improve handling of the data from EPD at the building level and the assessment of environment

23、al performance of buildings. An EPD expressed in a standardized format will facilitate the communication of the products environmental performance for business-to-business (B2B). 1 Scope This European Standard is applicable to all construction products and services related to buildings and construct

24、ion works. It specifies and describes the communication format for the information defined in FprEN 15804 for business-to-business communication to ensure a common understanding through consistent communication of information. NOTE This European Standard does not deal with business to consumer commu

25、nication and is not intended for that purpose. Business to consumer communication format is planned to be the subject of a future document. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited a

26、pplies. For undated references, the latest edition of the referenced document (including any amendments) applies. FprEN 15804:2011, Sustainability of construction works Environmental product declarations Core rules for the product category of construction products EN ISO 14020, Environmental labels

27、and declarations General principles (ISO 14020:2000) 3 Terms and definitions For the purposes of this document, the terms and definitions given in FprEN 15804:2011 and the following apply. 3.1 consumer individual member of the general public purchasing or using goods, property or services for privat

28、e purposes EN ISO 14025:2006 3.2 business-to-business communication describing or involving the passage of information between different businesses, rather than between businesses and the general public and consumers EN 15942:2011 (E) DIN EN 15942:2012-01 4 3.3 significant figures those digits of a

29、number that carry meaning contributing to its precision NOTE This includes all digits except: leading and trailing zeros where they serve merely as placeholders to indicate the scale of the number, spurious digits introduced, for example, by calculations carried out to greater accuracy than that of

30、the original data, or measurements reported to a greater precision than the EPD supports. 4 Symbols and abbreviations B2B Business-to-business EPD Environmental Product Declaration ITM Information Transfer Matrix LCA Life Cycle Assessment LCIA Life Cycle Impact Assessment PCR Product Category Rules

31、5 General principles To present environmental information in a structured and consistent way and in a common format, a generic template is used. The generic template is used for information transfer. The generic template is called an Information Transfer Matrix (ITM). The ITM: does not preclude the

32、fact that an EPD can have an individual and unique format; is the standardized part of EPD communication according to FprEN 15804; a statement whether the ITM has been independently verified shall be made. The ITM addresses the following types of information according to FprEN 15804: general informa

33、tion; declaration of environmental parameters derived from LCA: parameters describing environmental impacts; parameters describing resource input; additional environmental information describing different waste categories and output flows; scenarios and technical information; additional information

34、on emissions to indoor air, soil and water during the use stage. NOTE For all quantified data, the corresponding scenario is specified in accordance with FprEN 15804. EN 15942:2011 (E) DIN EN 15942:2012-01 5 6 Requirements for EPD communication format An EPD shall include an ITM. The following requi

35、rements on formatting apply (electronic and paper): according to EN ISO 14020 the information in the ITM shall not be misleading. Structure: the EPD information shall be accurately placed in its unique position identified in the ITM, according to Annex A. Numerical data: quantitative data shall be n

36、umerically reported in the appropriate units of measurement as prescribed in FprEN 15804; numerical reporting of no more than three significant figures shall be applied. Use of language (text): text shall be clearly written adopting a single language throughout; where text is conveying a qualitative

37、 issue or parameter, it shall provide sufficient detail as to give transparency and precise and accurate understanding of that issue or parameter. 7 Information Transfer Matrix 7.1 General This clause defines the standardized part of the EPD communication i.e. the generic template. Communication of

38、standardized environmental information for construction products and services requires a format that provides a location of all elements of information from different sources. The ITM provides a unique and consistent reference position in a grid. With reference to FprEN 15804 the ITM will contain so

39、me information, which is mandatory and some information, which is voluntary, and so in some cases blanks or gaps can occur in the ITM. The matrix provides the template for communicating this information for each of the information modules as defined in FprEN 15804:2011, Figure 1. The matrix is also

40、used for communicating the information for any of the scenarios, which can occur and/or the respective technical information for these scenarios. The ITM consists of a grid structure in which all items of information according to FprEN 15804 shall be presented. The ITM allows reporting of an EPD cov

41、ering a full life cycle, but also for example, of information representing single or multiple scenarios for discrete life cycle stages such as production, use or end of life. Where multiple scenarios for discrete life cycle stages or information modules are to be reported the ITM shall be separated

42、into sub-ITM-tables where each sub table addresses all the scenarios related to a specific life cycle stage or information module. These sub-ITM-tables shall follow the structure of the master-ITM-Tables A.2 to A.8. Where there are known linkages between scenarios of different modules these shall be

43、 stated in Table A.2. The content of an EPD shall be communicated at minimum through the ITM as given in Annex A. For EPDs which cover only cradle to gate or cradle to gate with options, only the product stage ITM and where relevant scenario ITM shall be provided. EN 15942:2011 (E) DIN EN 15942:2012

44、-01 6 7.2 Aggregation of information The information modules A1, A2, and A3 may be reported separately and/or aggregated to a sub sum of the information module “I Product Stage”. No other aggregations shall be made. EN 15942:2011 (E) DIN EN 15942:2012-01 7 Annex A (normative) Master ITM The Tables A

45、.1 to A.7 reflect the parameters required in FprEN 15804. Table A.1 Declaration of general information Declaration of general information a The name and address of the manufacturer(s) b The description of the construction products use The functional unit The declared unit c Construction product iden

46、tification by name (including any. product code) A simple visual representation of the construction product to which the data relates d A description of the main product components and or material NOTE This description is intended to enable the user of the EPD to understand the composition of the pr

47、oduct in delivery condition and also support a safe and effective installation, use and disposal of the product. e Name of the programme used and the programme operators name and address and, if relevant the logo and website f The date the declaration was issued The end of the 5 year period of valid

48、ity g Information on which stages are not considered, if the declaration is not based on an LCA covering all life cycle stages h A statement that EPDs of construction products may not be comparable if they do not comply with this European Standard i In the case where an EPD is declared as an average environmental performance for a number of products a statement to that effect shall be included in the declaration: range/ variability of the LCIA result