DIN EN 54-29-2015 Fire detection and fire alarm systems - Part 29 Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors German version EN 54-2.pdf

《DIN EN 54-29-2015 Fire detection and fire alarm systems - Part 29 Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors German version EN 54-2.pdf》由会员分享，可在线阅读，更多相关《DIN EN 54-29-2015 Fire detection and fire alarm systems - Part 29 Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors German version EN 54-2.pdf（100页珍藏版）》请在麦多课文档分享上搜索。

1、June 2015 Translation by DIN-Sprachendienst.English price group 31No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 1

2、3.220.20!%Ck“2322772www.din.deDDIN EN 54-29Fire detection and fire alarm systems Part 29: Multi-sensor fire detectors Point detectors using a combination of smoke and heat sensors;English version EN 54-29:2015,English translation of DIN EN 54-29:2015-06Brandmeldeanlagen Teil 29: Mehrfachsensor-Brand

3、melder Punktfrmige Melder mit kombinierten Rauch- und Wrmesensoren;Englische Fassung EN 54-29:2015,Englische bersetzung von DIN EN 54-29:2015-06Systmes de dtection et dalarme incendie Partie 29: Dtecteurs dincendie multi-capteurs Dtecteurs ponctuels utilisant une combinaison de capteurs de fume et d

4、e chaleur;Version anglaise EN 54-29:2015,Traduction anglaise de DIN EN 54-29:2015-06See start of applicationwww.beuth.deDocument comprises 100 pagesIn case of doubt, the German-language original shall be considered authoritative.05.15 DIN EN 54-29:2015-06 2 A comma is used as the decimal marker. Sta

5、rt of application The start of application of this standard is 2015-06-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal

6、Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. National foreword This document (EN 54-29:2015) has been prepared by Technical Committee CEN/TC 72 “Fire detection

7、and fire alarm systems” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the DIN-Normenausschuss Feuerwehrwesen (DIN Standards Committee Firefighting and Fire Protection), Working Group NA 031-02-01-08 AK Brandmelder Gruppe A of Working Committee NA 031

8、-02-01 AA Brandmelde- und Feueralarmanlagen. This European product standard specifies requirements for multi-sensor fire detectors Point detectors using a combination of smoke and heat sensors for use in fire detection and alarm systems permanently installed in buildings (referred to in German as “B

9、MS” and “BMA” equipment). The system requirements and technical application rules for fire detection and fire alarm systems complying with this standard are specified in DIN 14675 and DIN VDE 0833-2 (VDE 0833-2). Certification of conformity of these products with the requirements specified in this E

10、uropean Standard is based on conformity evaluation of the products carried out by “Notified Bodies” in accordance with the EU Directive No. 305/2011 (see Annex ZA). It should be noted that, in Germany, smoke detection and the corresponding activation of fire protection dampers are to meet the requir

11、ements for building inspectorate approval by the Deutsches Institut fr Bautechnik (DIBt) (German Building Institute). DIN EN 54-29:2015-06 3 National Annex NA (informative) Bibliography DIN 14675, Fire detection and fire alarm systems Design and operation DIN VDE 0833-2 (VDE 0833-2), Alarm systems f

12、or fire, intrusion and hold up Part 2: Requirements for fire alarm systems EUV 305/2011, Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC D

13、IN EN 54-29:2015-06 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 54-29 April 2015 ICS 13.220.20 English Version Fire detection and fire alarm systems - Part 29: Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors Syst

14、mes de dtection et dalarme incendie - Partie 29 : Dtecteurs dincendie multi-capteurs - Dtecteurs ponctuelsutilisant une combinaison de capteurs de fume et de chaleur Brandmeldeanlagen - Teil 29: Mehrfachsensor-Brandmelder - Punktfrmige Melder mit kombinierten Rauch- und Wrmesensoren This European St

15、andard was approved by CEN on 15 February 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concern

16、ing such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into

17、its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Ger

18、many, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE F

19、R NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 54-29:2015 EEN 54-29:2015 (E) 2 Contents Page Foreword 6 Introduction .8 1 Scope 9 2 Normative referenc

20、es 9 3 Terms and definitions 10 4 Requirements 10 4.1 General . 10 4.2 Nominal activation conditions/sensitivity 10 4.2.1 Individual alarm indication 10 4.2.2 Response to slowly developing fires 10 4.2.3 Repeatability of smoke response 11 4.2.4 Directional dependence of smoke response . 11 4.2.5 Dir

21、ectional dependence of heat response . 11 4.2.6 Lower limit of heat response . 11 4.2.7 Reproducibility of smoke response 11 4.2.8 Reproducibility of heat response 11 4.2.9 Air movement 11 4.2.10 Dazzling . 11 4.3 Operational reliability . 11 4.3.1 Connection of ancillary devices 11 4.3.2 Monitoring

22、 of detachable detectors 11 4.3.3 Manufacturers adjustments 12 4.3.4 On-site adjustment of response behaviour . 12 4.3.5 Protection against the ingress of foreign bodies 12 4.3.6 Software controlled detectors . 12 4.4 Tolerance to supply parameters . 13 4.4.1 Variation in supply parameters . 13 4.5

23、Performance parameters under fire conditions 14 4.5.1 Fire sensitivity . 14 4.6 Durability of nominal activation conditions/sensitivity 14 4.6.1 Temperature resistance . 14 4.6.2 Humidity resistance 14 4.6.3 Shock and vibration resistance . 14 4.6.4 Electrical stability . 15 4.6.5 Resistance to chem

24、ical agents . 15 5 Test and assessment and sampling methods . 15 5.1 General . 15 5.1.1 Atmospheric conditions for tests . 15 5.1.2 Operating conditions for tests 15 5.1.3 Mounting arrangements . 15 5.1.4 Tolerances . 16 5.1.5 Measurement of smoke response value 16 5.1.6 Measurement of heat response

25、 value 16 5.1.7 Provision for tests 17 5.1.8 Test schedule 17 5.2 Nominal activation conditions/sensitivity 18 5.2.1 Individual alarm indication 18 DIN EN 54-29:2015-06 EN 54-29:2015 (E) 3 5.2.2 Response to slowly developing fires 19 5.2.3 Repeatability of smoke response 19 5.2.4 Directional depende

26、nce of smoke response 19 5.2.5 Directional dependence of heat response 20 5.2.6 Lower limit of heat sensitivity 20 5.2.7 Reproducibility of smoke response 21 5.2.8 Reproducibility of heat response 21 5.2.9 Air movement . 22 5.2.10 Dazzling 22 5.3 Operational reliability 23 5.3.1 Connection of ancill

27、ary devices 23 5.3.2 Monitoring of detachable detectors 23 5.3.3 Manufacturers adjustments . 23 5.3.4 On-site adjustment of behaviour . 23 5.3.5 Protection against the ingress of foreign bodies 23 5.3.6 Software controlled devices . 23 5.4 Tolerance to supply parameters 24 5.4.1 Variation in supply

28、parameters 24 5.5 Performance parameters under fire conditions . 24 5.5.1 Fire sensitivity . 24 5.6 Durability of nominal activation conditions/sensitivity . 26 5.6.1 Temperature resistance 26 5.6.2 Humidity resistance 28 5.6.3 Shock and vibration resistance . 30 5.6.4 Electrical stability 34 5.6.5

29、Resistance to chemical agents 35 6 Assessment and verification of constancy of performance (AVCP) . 37 6.1 General . 37 6.2 Type testing . 37 6.2.1 General . 37 6.2.2 Test samples, testing and compliance criteria 38 6.2.3 Test reports 38 6.3 Factory production control (FPC) 38 6.3.1 General . 38 6.3

30、.2 Requirements . 39 6.3.3 Product specific requirements . 41 6.3.4 Initial inspection of factory and FPC . 42 6.3.5 Continuous surveillance of FPC 42 6.3.6 Procedure for modifications 42 6.3.7 One-off products, pre-production products, (e.g. prototypes) and products produced in very low quantities

31、43 7 Classification and designation 43 8 Marking, Labelling and Packaging 44 Annex A (normative) Smoke tunnel for smoke response values 45 Annex B (normative) Test aerosol for smoke response value measurements 46 Annex C (normative) Smoke measuring instruments . 47 C.1 Obscuration meter . 47 C.2 Mea

32、suring ionization chamber (MIC) . 47 Annex D (normative) Heat tunnel for heat response value 51 Annex E (normative) Apparatus for dazzling test . 52 Annex F (informative) Apparatus for impact test. 54 DIN EN 54-29:2015-06 EN 54-29:2015 (E) 4 Annex G (normative) Fire test room . 56 Annex H (normative

33、) Open wood fire (TF1) . 58 H.1 Fuel . 58 H.2 Arrangement 58 H.3 Method of ignition . 58 H.4 Variables 58 H.5 End-of-test condition 58 H.6 Test validity criteria 59 Annex I (normative) Smouldering (pyrolysis) wood fire (TF2) 61 I.1 Fuel . 61 I.2 Hotplate 61 I.3 Arrangement 61 I.4 Heating rate . 61 I

34、.5 End-of-test condition 61 I.6 Test validity criteria 61 Annex J (normative) Glowing smouldering cotton fire (TF3) 65 J.1 Fuel . 65 J.2 Arrangement 65 J.3 Ignition . 66 J.4 End-of-test condition 67 J.5 Test validity criteria 67 Annex K (normative) Open plastics (polyurethane) fire (TF4) . 69 K.1 Fu

35、el . 69 K.2 Conditioning 69 K.3 Arrangement 69 K.4 Ignition . 69 K.5 Method of ignition . 69 K.6 End-of-test condition 69 K.7 Test validity criteria 69 Annex L (normative) Liquid (heptane) fire (TF5) . 71 L.1 Fuel . 71 L.2 Arrangement 71 L.3 Ignition . 71 L.4 End-of-test condition 71 L.5 Test validi

36、ty criteria 71 Annex M (normative) Low temperature black smoke (decalene) liquid fire (TF8) 73 M.1 Fuel . 73 M.2 Arrangement 73 DIN EN 54-29:2015-06 EN 54-29:2015 (E) 5 M.3 Ignition 73 M.4 End-of-test condition 73 M.5 Test validity criteria . 73 Annex N (informative) Information concerning the const

37、ruction of the smoke tunnel . 75 Annex O (informative) Construction of the heat tunnel 77 Annex P (informative) Information concerning test procedures and requirements for the response to slowly developing fires 80 Annex Q (informative) Information concerning the construction of the measuring ioniza

38、tion chamber 84 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation 86 ZA.1 Scope and relevant characteristics . 86 ZA.2 Procedure for assessment and verification of constancy of performance (AVCP) of point detectors using a c

39、ombination of smoke and heat sensors. 88 ZA.3 CE marking and labelling . 92 Bibliography 96 DIN EN 54-29:2015-06 EN 54-29:2015 (E) 6 Foreword This document (EN 54-29:2015) has been prepared by Technical Committee CEN/TC 72 “Fire detection and fire alarm systems”, the secretariat of which is held by

40、BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2015, and conflicting national standards shall be withdrawn at the latest by January 2017. Attention is drawn to the possibility that s

41、ome of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, a

42、nd supports the basic requirements of Regulation (EU) 305/2011. For relationship with EU Regulations, see informative Annex ZA which is an integral part of this document. EN 54, Fire detection and fire alarm systems, consists of the following parts: Part 1: Introduction Part 2: Control and indicatin

43、g equipment Part 3: Fire alarm devices Sounders Part 4: Power supply equipment Part 5: Heat detectors Point detectors Part 7: Smoke detectors Point detectors using scattered light, transmitted light or ionization Part 10: Flame detector Point detectors Part 11: Manual call points Part 12: Smoke dete

44、ctors Line detector using an optical light beam Part 13: Compatibility assessment of system components Part 14: Technical Specification: Guidelines for planning, design, installation, commissioning, use and maintenance Part 16: Voice alarm control and indicating equipment Part 17: Short circuit isol

45、ators Part 18: Input/output devices Part 20: Aspirating smoke detectors Part 21: Alarm transmission and fault warning routing equipment Part 22: Resettable Line-type heat detectors Part 23: Fire alarm devices Visual alarms DIN EN 54-29:2015-06 EN 54-29:2015 (E) 7 Part 24: Components of voice alarm s

46、ystems Loudspeakers Part 25: Components using radio links and system requirements Part 26: Point fire detectors using carbon monoxide sensors Part 27: Duct smoke detectors Part 28: Non-resettable (digital) line type heat detectors Part 29: Point detectors using a combination of smoke and heat sensor

47、s Part 30: Point detectors using a combination of carbon monoxide and heat sensors Part 31: Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors Part 32: Guidelines for the planning, design, installation, commissioning, use and maintenance of voice alarm systems

48、NOTE This list includes standards that are in preparation and other standards may be added. For current status of published standards refer to http:/www.cen.eu/Pages/default.aspx. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Ma