DIN EN 13305-2009 Bitumen and bituminous binders - Framework for specification of hard industrial bitumens English version of DIN EN 13305 2009-07《沥青和沥青粘合剂 硬质工业沥青的规范框架 英文版本DIN EN 1.pdf

《DIN EN 13305-2009 Bitumen and bituminous binders - Framework for specification of hard industrial bitumens English version of DIN EN 13305 2009-07《沥青和沥青粘合剂 硬质工业沥青的规范框架 英文版本DIN EN 1.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13305-2009 Bitumen and bituminous binders - Framework for specification of hard industrial bitumens English version of DIN EN 13305 2009-07《沥青和沥青粘合剂 硬质工业沥青的规范框架 英文版本DIN EN 1.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、July 2009DEUTSCHE NORM English price group 6No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 75.140; 91.100.50!$XO=“153

2、4426www.din.deDDIN EN 13305Bitumen and bituminous binders Framework for specification of hard industrial bitumensEnglish version of DIN EN 13305:2009-07Bitumen und bitumenhaltige Bindemittel Spezifikationsrahmen fr Hartbitumen fr industrielle AnwendungenEnglische Fassung DIN EN 13305:2009-07Supersed

3、esDIN EN 13305:2003-07www.beuth.deDocument comprises 7 pagesDIN EN 13305:2009-07 2 National foreword This standard has been prepared by Technical Committee CEN/TC 336 “Bituminous binders” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Ma

4、terialprfung (Materials Testing Standards Committee), Joint Technical Committee NA 062-03-32 GA Bitumen; Prfverfahren und Anforderungen fr die Bindemittel. Amendments This standard differs from DIN EN 13305:2003-07 as follows: a) EN ISO 3838 has been deleted from clause 2 “Normative references”. b)

5、Table 1 in clause 3 has been revised. c) DIN EN 15326 has been added to clause 2 “Normative references”. Previous editions DIN EN 13305: 2003-07 EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 13305March 2009ICS 75.140; 91.100.50 Supersedes EN 13305:2003 English VersionBitumen and bituminous binde

6、rs - Framework for specification ofhard industrial bitumensBitumes et liants bitumineux - Cadre de spcifications desbitumes industriels dursBitumen und bitumenhaltige Bindemittel -Spezifikationsrahmen fr Hartbitumen fr industrielleAnwendungenThis European Standard was approved by CEN on 10 February

7、2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained o

8、n application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Cen

9、tre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

10、 Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means

11、 reservedworldwide for CEN national Members.Ref. No. EN 13305:2009: EEN 13305:2009 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Properties and test methods 44 Typical grades 5DIN EN 13305:2009-07 EN 13305:2009 (E) 3 Foreword This document (EN 13305:2009) has been prepared by Tech

12、nical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall

13、 be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13305:2003.

14、 According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

15、 Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 13305:2009-07 EN 13305:2009 (E) 4 1 Scope This European Standard provides a framework for the specification of hard industrial bitumens

16、 used mainly in flooring, varnishes, mineral rubber, roofing and mastic. Within Europe several types of hard industrial bitumen are used, and dependent upon traditional practices, different grades may be used for the same purpose. The framework given in this European standard provides a basis for qu

17、ality agreements to be established between supplier and client. The hard industrial bitumen products are graded by the limits of the ring and ball softening point values, expressed as multiples of 5, and are characterised by an H in front of the values. 2 Normative references The following reference

18、d documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1426, Bitumen and bituminous binders Determination of needle penetrat

19、ion EN 1427, Bitumen and bituminous binders Determination of the softening point Ring and Ball method EN 12592, Bitumen and bituminous binders Determination of solubility EN 13303, Bitumen and bituminous binders Determination of the loss in mass after heating of industrial bitumen EN 15326, Bitumen

20、and bituminous binders Measurement of density and specific gravity Capillary-stoppered pyknometer method EN ISO 2592, Determination of flash and fire points - Cleveland open cup method (ISO 2592:2000) 3 Properties and test methods Hard industrial bitumens are specified according to the limits of sof

21、tening point values. The specification of hard industrial bitumens with stated values shall be made according to the rules given in Table 1: DIN EN 13305:2009-07 EN 13305:2009 (E) 5 Table 1 Properties and test methods Property Test methods Unit Limits and tolerance Ring and ball softening point aEN

22、1427 C 5 of mid-point valuee Penetration at 25 CbEN 14260,1 mm cSolubility in toluene dEN 12592 % 99,0 Loss in mass after heating EN 13303 % NR cFlash point EN ISO 2592 C 250 Density EN 15326 kg/m3NR ca Ring and ball softening point testing for hard industrial bitumens are carried out in glycerol, a

23、s the values typically are above 80 C. b Taking into account the precision of the test method and the specification limits, it may be necessary to carry out the test at 40 C. c NR: No requirements. Values can be agreed between the clients and the suppliers d If other solvents are used, it shall be s

24、tated in the test report. eMid-point value: value which defines the ring and ball softening point class 4 Typical grades Typical grades for hard industrial bitumen are: H 80/90; H 85/95; H 90/100; H 100/110; H 155/165. EXAMPLE H 85/95 means that the softening point of the product is between 85 C and 95 C. NOTE This list does not imply that all grades are available in all countries, neither is it intended to be comprehensive or limiting. Other grades may be supplied in accordance with the local practices, and by agreement between client and supplier. DIN EN 13305:2009-07