DIN 67510-2-2002 Photoluminescent pigments and products - Part 2 Measurement of phosphorescent products on site《发光颜料和产品 第2部分 发光产品的现场测量》.pdf
《DIN 67510-2-2002 Photoluminescent pigments and products - Part 2 Measurement of phosphorescent products on site《发光颜料和产品 第2部分 发光产品的现场测量》.pdf》由会员分享,可在线阅读,更多相关《DIN 67510-2-2002 Photoluminescent pigments and products - Part 2 Measurement of phosphorescent products on site《发光颜料和产品 第2部分 发光产品的现场测量》.pdf(8页珍藏版)》请在麦多课文档分享上搜索。
1、October 2002DEUTSCHE NORM Normenausschuss Lichttechnik (FNL) im DINDIN-SprachendienstEnglish price group 6No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale
2、 for German Standards (DIN-Normen).ICS 13.200; 87.060.10!%$Yq“2015478www.din.deDDIN 67510-2Photoluminescent pigments and products Part 2: Measurement of phosphorescent products on site,English translation of DIN 67510-2:2002-10Langnachleuchtende Pigmente und Produkte Teil 2: Messung von langnachleuc
3、htenden Produkten am Ort der Anwendung,Englische bersetzung von DIN 67510-2:2002-10Produits et pigments photoluminescents Partie 2: Lessai de qualit sur le site dapplication,Traduction anglaise de DIN 67510-2:2002-10SupersedesDIN 67510-2:1992-01www.beuth.deDocument comprises 8 pages01.14 DIN 67510-2
4、:2002-10 2 A comma is used as the decimal marker. Contents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Terms and definitions 4 4 Measurements 4 4.1 Measuring conditions 4 4.2 Measurement of the illuminance .4 4.2.1 Illuminance measuring instrument .4 4.2.2 Procedure 5 4.3 Measurement of l
5、uminance as a function of time .5 4.3.1 General 5 4.3.2 Measurement of luminance .5 4.3.3 Determining the luminance by measuring illuminance 5 4.3.4 Effect of stray light .6 4.3.5 Procedure .6 5 Measurement record 6 Annex A (informative) Example of measurement record .8 Figure A.1 Measurement record
6、 form 8 DIN 67510-2:2002-10 3 Foreword This standard has been prepared by Working Committee FNL 19 Leuchtfarben of the Normenausschuss Lichttechnik (FNL) (Lighting Technology Standards Committee). This standard is recognized by the Hauptverband der gewerblichen Berufsgenossenschaften (Federation of
7、German Industrial Employers Liability Insurance Associations). DIN 67510 consists of the following parts, under the general title Phosphorescent pigments and products: Part 1: Measurement and marking at the producer Part 2: Measurement of phosphorescent products on site Part 3: Low location lighting
8、 system Part 4: Products for phosphorescent escape route systems Markings and applications Annex A is informative. Amendments This standard differs from DIN 67510-2:1992-01 as follows: harmonization with the measuring conditions in DIN 67510-1. Previous editions DIN 67510-2: 1992-01 DIN 67510-2:2002
9、-10 4 1 Scope This standard applies to the measurement of the luminescence of phosphorescent products at the place where they are used. This standard specifies the measurement of illuminance on the phosphorescent product and of the change in the luminance of the phosphorescent product over time. 2 N
10、ormative references This standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the titles of the publications are listed below. For dated references, subsequent amendments to or revisi
11、ons of any of these publications apply to this standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies (including any amendments). DIN 5031-3, Optical radiation physics and illuminating engineering Quantities,
12、symbols and units of illuminating engineering DIN 5032-7, Photometry Classification of illuminance meters and luminance meters DIN 66348-1, Interfaces and basic data link control procedures for serial measurement data communication Start-stop transmission, point-to-point connection. DIN 67510-1, Pho
13、sphorescent pigments and products Measurement and marking at the producer 3 Terms and definitions See DIN 67510-1. 4 Measurements 4.1 Measuring conditions Measurements shall be carried out in the normal conditions to be found at the place of use, particularly as regards illumination and temperature.
14、 The illumination equipment shall be switched on at least 15 min before the measurements begin. 4.2 Measurement of the illuminance 4.2.1 Illuminance measuring instrument The level and uniformity of illuminance shall be determined using an illuminance measuring instrument, which shall meet the follow
15、ing requirements: a) measurement range of at least 10 lx to 10 klx; b) diameter of the light aperture of the photometer head 80 % of the measured surface; c) other parameters according to class B as specified in DIN 5032-7. DIN 67510-2:2002-10 5 4.2.2 Procedure To measure the illuminance on the phos
16、phorescent product to be evaluated, the light aperture of the photometer head shall be mounted in front of the phosphorescent product parallel to its surface at the place where the luminance is then be measured in accordance with 4.3. 4.3 Measurement of luminance as a function of time 4.3.1 General
17、There shall be a waiting period of 5 min between the end of the illuminance measurement and the start of the luminance measurement as a function of time. During this period, the phosphorescent product shall again be exposed to excitation using the existing illumination conditions. 4.3.2 Measurement
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DIN6751022002PHOTOLUMINESCENTPIGMENTSANDPRODUCTSPART2MEASUREMENTOFPHOSPHORESCENTPRODUCTSONSITE 发光 颜料

链接地址:http://www.mydoc123.com/p-661097.html