DIN 33870-2-2013 Office machines - Requirements and tests for the preparation of refilled toner modules for electrophotographical printer copiers and facsimile machines- Part 2 4-C.pdf

《DIN 33870-2-2013 Office machines - Requirements and tests for the preparation of refilled toner modules for electrophotographical printer copiers and facsimile machines- Part 2 4-C.pdf》由会员分享，可在线阅读，更多相关《DIN 33870-2-2013 Office machines - Requirements and tests for the preparation of refilled toner modules for electrophotographical printer copiers and facsimile machines- Part 2 4-C.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、December 2013DEUTSCHE NORM English price group 20No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 87.080!%F2h“235156

2、9www.din.deDIN 33870-2Office machines Requirements and tests for the preparation of refilled toner modules for electrophotographical printers, copiers and facsimile machinesPart 2: 4Colourprinters; with CDROM,English translation of DIN 33870-2:2013-12Brogerte Anforderungen und Prfungen fr die Aufber

3、eitung von gebrauchten Tonermodulen fr elektrofotographische Drucker, Kopierer und Fernkopierer Teil 2: 4FarbDruckgerte; mit CDROM,Englische bersetzung von DIN 33870-2:2013-12Bureautique et ingnerie des donnes Exigences et essais relatifs au traintement des modules pour imprimantes lectrophotographi

4、ques, copieurs et tlcopieurs Partie 2: Imprimantes 4couleur; avec CDROM,Traduction anglaise de DIN 33870-2:2013-12Together withDIN 338701:201312,supersedesDIN 33870:200101;supersedesDINFachbericht 155:200709www.beuth.deDocument comprises 44 pagesDDIN-Normenausschuss Informationstechnik und Anwendung

5、en (NIA)DIN-Sprachendienst02.17 DIN 33870-2:2013-12 2 A comma is used as the decimal marker. Contents Page Foreword . 4 1 Scope 5 2 Normative references 5 3 Terms and definitions 6 4 Remanufacturing process . 8 4.1 General 8 4.2 Documentation . 9 4.3 Remanufacturing . 9 5 Requirements 10 5.1 General

6、 10 5.2 Health-related properties 10 5.3 Influence of the toner cartridge on the printer (durability test) . 11 5.4 Start-up behaviour 11 5.5 Yield count (YC) 11 5.6 Properties of prints . 11 5.6.1 General 11 5.6.2 Colour reproduction . 11 5.6.3 Fade 12 5.6.4 Toner adhesion. 14 5.6.5 Colour uniformi

7、ty 15 5.6.6 Background 15 5.6.7 Ghosting 15 5.6.8 Toner miscibility 15 6 Sampling . 15 7 Testing . 15 7.1 Test equipment. 15 7.1.1 Test device . 15 7.1.2 Test templates 16 7.1.3 Test paper . 16 7.1.4 Colour measurement device 16 7.1.5 Adhesive tape 16 7.2 Preparation of samples and test equipment .

8、16 7.3 Creating test and reference prints 17 7.4 Procedure . 17 7.4.1 Test conditions . 17 7.4.2 Mechanical function (durability test) . 18 7.4.3 Start-up behaviour 18 7.4.4 Yield 18 7.5 Print properties 21 7.5.1 Colour reproduction . 21 7.5.2 Fade 21 7.5.3 Toner adhesion. 21 DIN 33870-2:2013-12 3 7

9、.5.4 Colour uniformity 21 7.5.5 Background . 21 7.5.6 Ghosting 22 7.5.7 Toner miscibility . 22 8 Health and safety . 22 8.1 General 22 8.2 Material safety data sheet 22 8.3 AMES test 22 9 Test report . 22 10 Marking . 23 10.1 General 23 10.2 Toner cartridge 23 10.3 Packaging . 23 10.4 Instruction ma

10、nual . 24 10.5 Internet . 24 Annex A (normative) Test templates A Determining the yield according to ISO/IEC 24712 Test template A.1 according to ISO/IEC 24712, Annex A, Business letter . 26 Annex B (normative) Test templates B Determining the print quality Test template B.1 16 colour levels CMYK 31

11、 Annex C (normative) Form sheet C for evaluation of the tests . 36 Bibliography . 44 Figures Figure 1 Defined test area for measuring fade in test template B.1 . 13 Tables Table 1 Calculation example for fade 14 Table 2 Evaluation of the calculation example for fade 14 Table 3 Use of test charts in

12、the course of testing ( 10 000 pages) 19 Table 4 Use of test charts in the course of testing (10 001 20 000 pages) . 20 Table 5 Use of test charts in the course of testing ( 20 001*)pages) . 20 *)Translators note: The number “20 001” is an error in the German version of this standard. It should corr

13、ectly read “20 000”. DIN 33870-2:2013-12 4 Foreword This standard has been prepared by Working Committee NA 043-01-28 AA Brogerte of the Normenausschuss Informationstechnik und Anwendungen (NIA) (Information Technology and Selected IT Applications Standards Committee). It defines requirements and te

14、sts for the remanufacturing of original toner cartridges and is intended to act as a basis for a generally applicable evaluation of these cartridges. At the same time, environmental and sustainability aspects are also taken into consideration. The digital test templates (PDF files) and specimen form

15、 C for evaluating the tests are attached to the standard on CD-ROM. DIN 33870 Requirements and tests for the remanufacturing of refilled toner cartridges for electrophotographical printers, copiers and facsimile machines consists of the following parts: Part 1: Monochrome; with CD-ROM Part 2: 4-Colo

16、ur printers; with CD-ROM Amendments This standard differs from DIN 33870:2001-01 and DIN-Fachbericht (DIN Technical Report) 155:2007-09 as follows: a) the scope of test procedures has been restricted; b) information on the remanufacturing process and minimum information on the documentation have bee

17、n added; c) ISO/IEC 19798 has been taken into account; d) the scope of the test has been extended; e) further test templates have been added. Previous editions DIN 33870: 2001-01 DIN-Fachbericht 155: 2007-09 DIN 33870-2:2013-12 5 1 Scope This standard applies solely to remanufactured toner cartridge

18、s with black, yellow, magenta and cyan toner which are used in office machines with printing functions (4-Colour printers). The test procedures described in this standard apply to toner cartridges complying with this standard for use in colour printers (within the meaning of this standard) which wer

19、e first placed on the market after 31 December 2013. The date of issue of the EU conformity declaration is used for the date of first marketing. Thus, DIN 33870-2 is to be applied for toner cartridges used in printers which were first placed on the market after the date mentioned above. For toner ca

20、rtridges used exclusively in printers which were first placed on the market before 31 December 2013, the test methods described in DIN-Fachbericht 155 remain in effect. The marketer of the remanufactured toner cartridges shall include a copy of the EU conformity declaration of the printer in the tes

21、t documentation and be able to indicate the source of the EU conformity declaration if he wishes to apply the test procedures according to DIN-Fachbericht 155. In matters relating to marking, health, safety, and the remanufacturing process, DIN 33870-2 is also applicable for these toner cartridges.

22、This standard specifies the properties and functions after remanufacture as well as the tests to be carried out for proving the image describing quality aspects of toner cartridges. The aim of this standard is to specify minimum requirements for consistent printing quality and malfunction-free opera

23、tion across the entire period of use of the toner cartridges. NOTE The scope has been restricted in order to ensure that, even after publication of this standard, toner cartridges for older printers which are no longer obtainable in sufficient numbers for the tests can still be marked appropriately.

24、 Therefore the restriction applies only to the test procedures. For remanufactured toner cartridges with monochromatic toner which are used in monochromatic printers, DIN 33870-1 applies. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document

25、 and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. DIN 5033-7, Colorimetry Measurement conditions for object colours DIN 6160, Anomaloscopes for th

26、e diagnosis of red-green colour vision deficiencies DIN 58220-5, Visual acuity testing Part 5: Vision screening test for general use DIN EN 12281, Printing and business paper Requirements for copy paper for dry toner imaging processes DIN EN ISO 780, Packaging Pictorial marking for the handling of g

27、oods DIN EN ISO 4628-6, Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 6: Assessment of degree of chalking by tape method DIN ISO/IEC 17025, General requirements for the competence of test

28、ing and calibration laboratories DIN ISO/IEC 24712, Colour test pages for measurement of office equipment consumable yield ISO/IEC 19798, Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components DIN 33870-2:2013-12 6 ISO 116

29、64-4:2008, Colorimetry Part 4: CIE 1976 L*a*b* colour space1)Verordnung zum Schutz von Gefahrstoffen (Gefahrstoffverordnung) (Hazardous Substances Ordinance) as of 26 November 2010, BGBl (German Federal Law Gazette) I, pp. 1643, 1644 in the current version2)EGV 1907/06 DG, Gesetz zur Durchfhrung der

30、 Verordnung (EG) Nr. 1907/06 (REACH-Anpassungsgesetz) (Law on Enforcement of Directive (EC) No. 1907/06 (REACH Adaptation Law)2)TRGS 614, Verwendungsbeschrnkungen fr Azofarbstoffe, die in krebserzeugende aromatische Amine gespalten werden knnen (Restrictions on the usage of azocolorants which can br

31、eak down into carcinogenic amines)2)3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 primary colours individual colours used to create mixed colours Note 1 to entry: Primary colours in the sense of this standard are: cyan, magenta, yellow and

32、black. SOURCE: DIN 33871-2:2009 3.2 yield number of prints which can be produced from an unused unit of consumption under defined conditions before the termination criteria arise 3.3 lightness coordinate L* of the CIELAB colour space Note 1 to entry: The lightness is measured using a colour measurem

33、ent device in the CIELAB colour space. 3.4 colour reproduction relationship between the reproduced colours of a digital test template in a printing process using remanufactured toner cartridges, and the reproduced colours in an exactly corresponding process using reference materials Note 1 to entry:

34、 One measure for the colour reproduction characteristic is the average colour difference E*ab,mor, for black, the lightness difference L* = L*p-L*v(see test of colour reproduction). SOURCE: DIN 33871-2:2009 1) Registered in the DITR database of DIN Software GmbH, obtainable from: Beuth Verlag GmbH,

35、10772 Berlin. 2)Registered in the DITR database of DIN Software GmbH, obtainable from: Beuth Verlag GmbH, 10772 Berlin. DIN 33870-2:2013-12 7 3.5 toner colour powder for the electrophotographic printing process, consisting of pigments and additives 3.6 residual toner toner which is still in the tone

36、r cartridge before remanufacturing 3.7 toner adhesion property which describes the adhesion of a toner after it has been applied to paper and affixed 3.8 toner cartridge complex module (of a printer, copier, or facsimile machine) which, in addition to the toner container complete with toner, can als

37、o contain a photographic semiconductor, loading unit, cleaning unit, and residual toner container 3.9 toner miscibility compatibility between the toner used by the Original Equipment Manufacturer (OEM) and the toner used by the remanufacturer 3.10 original toner cartridge toner cartridge brought ont

38、o the market by the printer manufacturer 3.11 remanufactured toner cartridge toner cartridge which has run through the remanufacturing process Note 1 to entry: The remanufacturing process is defined in Clause 4 of this standard. 3.12 yield count YC ratio of the yield of a remanufactured unit of cons

39、umption (A) to the yield of a comparable unit of consumption (V), determined under identical test conditions: YC = A/V 3.13 “not significant” within the meaning of this standard, a deviation which does not influence usage characteristics 3.14 EC Safety Data Sheet compilation of product data relevant

40、 in the field of registration, evaluation, approval and restriction of chemical materials according to applicable regulations Note 1 to entry: The compilation is made according to Article 31, Requirements for Safety Data Sheets and Appendix II, Guidelines for the Creation of Safety Data Sheets of Di

41、rective (EC) No. 1907/2006. Note 2 to entry: Regulation (EC) No. 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European DIN 33870-2:2013-12 8 Chemicals Agency, am

42、ending directive 1999/45/EC and repealing Council Regulation (EEC) No. 793/93 and Commission Regulation (EC) No. 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (published in the Official Journal of the European Union L 396 of

43、 30 December 2006). Note 3 to entry: The mentioned directive meets the currently applicable legal requirements. If changes occur in the future, the texts of the legal regulations of the EU can be downloaded on the Internet under http:/eur- lex.europa.eu/RECH_legislation.do. 3.15 marketer manufacture

44、r or party bringing the remanufactured toner cartridges onto the market without naming the manufacturer 3.16 AMES test bacterial test procedure for mutagenic properties of substances (mutagenicity test) Note 1 to entry: This test was developed in the seventies by Prof. Bruce N. Ames (University of C

45、alifornia, Berkeley) and is considered the widest-known bacterial test for mutagenic effects of materials. 3.17 standard observer standard colorimetric observer whose sensitivity functions correspond to those specified by the CIE Note 1 to entry: The colour perception of the human eye changes with t

46、he visual field size of angular subtense. The standard colorimetric observer originally defined by the CIE in 1931 is based on a visual field size of angular subtense of 2. In 1964, an additional standard observer with a visual field size of angular subtense of 10 was defined see CIE 15:2004. Note 2

47、 to entry: Within the meaning of this standard, a defined viewing angle based on a visual field size of angular subtense of 2. 3.18 fade significant decrease of colour saturation on the printed page 3.19 background contamination of unprinted areas with toner particles 4 Remanufacturing process 4.1 G

48、eneral Compliance with the process steps shall be proven according to the recognized state of the art in a process description (e.g. according to DIN EN ISO 9001 and DIN EN ISO 14001). For traders / marketers with a private label, traceability to the manufacturer shall be ensured. If the marketer do

49、es not have a collection system reflecting the state of the art and proven in a process description, the provider of the collection system, which the marketer has to instruct in this case, shall have a collection system with process descriptions (e.g. according to DIN EN ISO 14001). The process description of the collection system shall also be submitted to the marketer. NOTE The operator of a collection system provides