CEPT ERC DEC -1998 European Radiocommunications Committee - ERC Decision of 20 March 1998 on the Adoption of Approval Regulations for Equipment to be Used for Radio Relay Systems Oo.pdf

《CEPT ERC DEC -1998 European Radiocommunications Committee - ERC Decision of 20 March 1998 on the Adoption of Approval Regulations for Equipment to be Used for Radio Relay Systems Oo.pdf》由会员分享，可在线阅读，更多相关《CEPT ERC DEC -1998 European Radiocommunications Committee - ERC Decision of 20 March 1998 on the Adoption of Approval Regulations for Equipment to be Used for Radio Relay Systems Oo.pdf（11页珍藏版）》请在麦多课文档分享上搜索。

1、STD-CEPT ERC/DEC/(S)Oq-ENGL 1998 232b414 001322b 802 ERC/DEC/(98)09 EUROPEAN RADIOCOMMUNICATIONS COMMITTEE ERC Decision of 20 March 1998 on the adoption of approval regulations for equipment to be used for radio relay systems operating in the fixed service for the transmission of digital signals and

2、 analogue video signals operating between 21.2 GHz and 23.6 GHz based on the European Standard (Telecommunications series) EN 300 198 VI .2.1 (ERC/DEC/( 9 8)09) EUROPEAN CONFERENCE OF POSTAL AND TELECOMMUNICATIONS ADMINISTRATIONS Copyright 1998 the European Conference of Postal and Telecommunication

3、s Administrations (CEPT) STDmCEPT ERC/DEC/(SB)OS-ENGL 3998 2326434 0033228 685 ERC/DEC/(98)09 Page 1 EXPLANATORY MEMORANDUM 1 INTRODUCTION The free movement of radiocommunications goods and the provision of Europe-wide services for radiocommunications are only achievable if there exist common regula

4、tions throughout Europe regarding availability of frequency bands, approval requirements and border crossing procedures. A basic requirement to fulfil these objectives is the Europe-wide implementation of national regulations based on the European Standards (Telecommunication series) (ENS) developed

5、 by the European Telecommunications Standards Institute (ETSI). This Decision (ERC/DEC/(98)09) provides the necessaty mechanism for CEPT Administrations to commit themselves to implement, within their national regimes, European Telecommunications Standard 300 198 and withdraw any conflicting nationa

6、l standard. 2 BACKGROUND Both the ERC and ETSI are involved in the development of common regulations, as described in (1) above. The Memorandum of Understanding between ERC and ETSI explains the respective responsibilities of the two organisations and its annex describes the principles of co-operati

7、on. The ERC, for its part, should, inter alia, adopt Decisions on the introduction of ETSI standards into approval regimes. EN 300 198 V1.2.1 has been prepared by the Transmission and Multiplexing (TM) Technical Committee of ETSI. The standard has undergone the ETSI standards approval procedure and

8、is now published as an EN. The EN is based on CEPT Recommendation T/R 13-02. The use of the frequency range (21.2 to 23.6 GHz ) covered by EN 300 198 V1.2.1 is not harmonised within CEPT. Administrations have adopted different arrangements, to meet national requirements, for frequency bands and chan

9、nel separations (3.5,7, 14,28,56 and I12 MHZ). Further, the equipment used in this frequency range is subject to national licensing and frequency planning which requires specification of, inter dia, frequency of operation and equivalent isotropically radiated power (e.i.r.p.). Nevertheless, there ar

10、e a number of parameters, in particular those considered by the ERC as essential for spectrum management purposes2, which can be harmonised by adopting within approval regulations the limit values and measurement methods provided in EN 300 198 V1.2.1. In the European Table of Frequency allocations f

11、or the year 2008 (ERC Report 25), the fixed service has been removed from the band 21.4 GHz - 22.0 GHz, reflecting the WARC-92 decision on the Broadcasting-Satellite Service (BSS) for High Definition Television (HDTV). EN 300 198 V1.2.1: “Transmission and Multiplexing (TM); Digital Radio Relay Syste

12、ms (DRRS); Parametersfor DRRS See Annex 1 of the Decision for the transmission of digital signais and analogue video signals operating at 23 GHz“ STDeCEPT ERC/DEC/(SA)09-ENGL 1998 D 232b414 0033229 513 ERC/DEC/(98)09 Page 2 3 REQUIREMENT FOR AN ERC DECISION The allocation and assignment of radio fre

13、quencies and the complementary equipment approval regimes in CEPT Member countries are laid down by law, regulation or administrative action. The ERC recognises that for harmonised fixed and mobile radio services to be introduced successfully throughout Europe, manufacturers and operators must be gi

14、ven the confidence to make the necessary investment in the development and procurement of new systems. Commitment by CEPT Administrations to implement this ERC Decision will provide a clear indication that equipment conforming to approval regulations based on EN 300 198 VI .2.1 will have the benefit

15、 of a Europe-wide market. STD.CEPT ERC/DEC/(8)09-ENGL 1998 2326434 0033230 233 ERCIDECl(98)09 Page 3 ERC Decision of 20 March 1998 on the adoption of approval regulations for equipment to be used for radio relay systems operating in the fixed service for the transmission of digital signals and analo

16、gue video signals operating between 21.2 GHz and 23.6 GHz based on the European Standard (Telecommunications series) EN 300 198 V1.2.1 (ERC/DEC(98)09) The European Conference of Postal and Telecommunications Administrations, considering: a) that CEPT has a long term objective to harmonise the use of

17、 frequencies and the related regulatory regimes; b) that such harmonisation will benefit administrations, manufacturers, operators and users; c) that ETSI has published EN 300 198 V1.2.1 for radio relay systems operating in the 21.2 to 23.6 GHz frequency range with channel separations of 3.5,7,14,28

18、,56 and 112 MHz; d) that EN 300 198 V1.2.1 supersedes ETS 300 198 and that, in due course, the ERC will abrogate its Decision, (ERC/DEC(96)09) associated with ETS 300 198; e) that, for the foreseeable future, there will continue to be widespread use of radio relay systems in the fixed service having

19、 the technical characteristics described in (c) above; f, that the European Table of Frequency Allocations (ERC Report 25) has identified the Broadcasting Satellite Service as the only primary service in the band 2 1.4 GHz - 22.0 GHz; g) that, in accordance with the Memorandum of Understanding betwe

20、en ERC and ETSI, the ERC shall adopt ERC Decisions on the introduction of ETSs and ENS into approval regimes; h) that the use of radio equipment is subject to national licensing and frequency planning requirements, in particular for frequency of operation and e.i.r.p.; i) that suitable transitional

21、arrangements are given in CEPT Recommendation T/R 01-05. STD-CEPT ERC/DEC/(S8)0S-ENGL 1998 232b414 0013231 L7T W ERC/DEC/(98)09 Page 4 DECIDES 1. to adopt approval regulations for equipment to be used for radio relay systems operating in the frequency bands 21.2 GHz - 21.4 GHz and 22.0 GHz - 23.6 GH

22、z with power levels of up to lW, based on the limit values and measurement methods for spectrum management parameters contained in EN 300 198 V 1.2.1, with the exclusion by national choice of those parameters which are subject to national licensing requirements3. A list of the spectrum management pa

23、rameters to be included in approval regulations is given in Annex 1; 2. to withdraw any conflicting national approval regulation(s); 3. that this Decision shall enter into force on 1 April 1998; 4. that CEPT Member Administrations shall communicate the national measures implementing this Decision to

24、 the ERC Chairman and the ER0 when the Decision is nationally implemented. Annex 2 and 3 are provided for information to show which options have been adopted by each administration in those cases where EN 300 198 V1.2.1 offers a choice STD.CEPT ERC/DEC/(Si)OS-ENGL 1998 9 2326434 OOL323Z O06 EN 300 1

25、98 V1.2.1 ERC/DEC/(98)09 Page 5 Annex 1 Section Comments ANNEX 1 Transmission capacity Parameters from EN 300 198 V1.2.1 to be included in approval regulations: 5.1 Options for transmission capacity with the appropriate channel spacings 3.5,7, 14,28,56 Transmitter characteristics I Limits for parame

26、ters of digital systems (section 5) 5.3 Options for channel spacings 3.5,7, 14,28, 56 and 1 12 MHz Transmitter power range Transmitter output power tolerance RF spectrum mask I 1 and 112 MHz. Manufacturers declaration Baseband Darameters I 5.2 5.3.1 5.3.3 5.3.5 Spurious emissions R!? frequency toler

27、ance Receiver characteristics 5.3.7 5.3.8 5.4 Spurious emissions System performance BER performance co-channel interference Interference sensitivity 5.4.3 5.5 5.5.1 5.5.3 5.5.3.1 Options for channel spacings 3.5,7, 14,28, 56 and 112 MHz adjacent channel interference I 5.5.3.2 I CW swrious interferen

28、ce I 5.5.3.3 I 1 Limits for parameters* of wide band analogue systems (section 6) Transmitlreceive capacity Baseband parameters Transmitter characteristics TX power range TX output power tolerance I 6.1 Options for transmission capacity with the appropriate channel spacings 28 and 56 MHz. Manufactur

29、ers declaration Options for channel spacings 28 and 56 MHz 6.3 6.4 6.4.1 6.4.2 Spectrum mask Spurious emissions FW freauencv tolerance 6.4.3.1 6.4.4 6.4.5 I Receiver threshold I 6.6.1 I I Receiver characteristics Spurious emissions Transmidreceive Derformance Co-channel interference I 6.6.2.a I adia

30、cent channel interference I 6.6.2.b I I 6.5 6.5.2 6.6 CW spurious interference I 6.6.2.c I I In some countries the spurious emissions and spurious radiations of transmitters and receivers are not considered as approval requirements but are essential requirements of the EMC Directive 89/336 EC for wh

31、ich alternative procedures apply. STD-CEPT ERC/DEC/(S8)09-ENGL 1998 2326434 0013233 T42 m Administration Albania ERC/DEC/(98)09 Page 7 Annex 2 Adoption of channel spacing options Adoption of options for environmental conditions ANNEX 2 Slovenia Adoption of the digital elements of EN 300 198 V1.2.1:

32、National variations I Switzerland I I I Andorra Republic of Macedonia I I Austria I 6,7,8, 10, 11, 12, 13, 14, 16, I 22,27 I Greece Iceland Ireland Italy Latvia Liechtenstein Hwary Lithuania Luxembourg Malta I Moldova I l I Monaco Netherlands Norway Poland Portugal Romania Russian Federation I Swede

33、n I I Ukraine United Kingdom Vatican Civ Previous page is blank STD-CEPT ERC/DEC/(98)09-ENGL i1998 m 232b414 0033234 989 ERC/DEC/(98)09 Page 8 Annex 2 Key: Channel spacing options Option 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Spectrum efficiency class 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3

34、 3 3 3 3 Bit-rate (Mbitk) 2 2 2x2 8 34 2x2 8 34 140 or 155 2 2x2 8 2x8 34 51 8 2x8 34 51 51 140 or 155 Channel Spacing (MH4 3.5 7 7 14 56 3.5 7 28 112 3.5 3.5 7 14 28 56 3.5 7 14 14 28 56 System grade A A A A A A A A A B B B B B B B B B B B B Class 1 : equipment performance based on typically 2-stat

35、e modulation scheme (e.g. 2-FSK (Frequency Shif Keying), Gaussian Minimum Shift Keying (GMSK) with discriminator detection, or equivalent); Class 2: equipment performances based on typically 4-state modulation scheme (e.g. 4-FSK, 4- QAM (Quadrature Amplitude Modulation), or equivalent); Class 3: equ

36、ipment performances based on typically 16-state modulation scheme (e.g. 16- QAM, or equivalent). Some equipment types, may benefit from some performance improvement due to the technology gap, for this reason two grades of system performance, grade A and grade B are provided. Environmental condition

37、options 22 = Class 3.1 23 = Class 3.2 24 = Class 3.3 25 = Class 3.4 26 =Class 3.5 27 = Class 4.1 28 = Class 4.1E Some countries may require a more stringent temperature range than is currently covered in this EN. ERCIDEC/(98)09 Pape 9 Annex 3 ANNEX 3 Adoption of the analogue elements of EN 300 198 V

38、1.2.1: National variations Key: Channel spacing Environmental conditions I = C3.5 MHz Video bandwidth in a 28 MHz Channel 2 = 6 MHz Video bandwidth in a 56 MHz Channel 3 = IO MHz Video bandwidth in a 56 MHz Channel 4 = I4 MHz Video bandwidth in a 56 MHz Channel 5 = Class 3.1 6 = Class 3.2 7 = Class

39、3.3 8 = Class 3.4 9 = Class 3.5 1 O = Class 4.1 11 = Class 4.1 STD*CEPT ERC/DEC/(98)09-ENGL 1998 m 2326414 0013236 751 m ERC/DEC/(98)09 Page 11 European Radiocommunications Committee Decision CEPT/ERC/DEC/(98)09 on the adoption of approval regulations for equipment to be used for radio relay systems

40、 operating in the fixed service for the transmission of digital signals and analogue video signals operating between 21.2 GHz and 23.6 GHz based on the European Standard (Telecommunications series) EN 300 198 V1.2.1 As of 1 June 1998 the following CEPT Members have committed themselves to apply the terms of this Decision: Austria Croatia Finland France Norway Porugal Turkey United Kingdom Italy State 8.6.1998 Previous page is blank