BS PD ISO TS 13399-308-2016 Cutting tool data representation and exchange Creation and exchange of 3D models Milling cutters with arbor hole for indexable inserts《切削工具数据的表示和交换 三维模型.pdf

《BS PD ISO TS 13399-308-2016 Cutting tool data representation and exchange Creation and exchange of 3D models Milling cutters with arbor hole for indexable inserts《切削工具数据的表示和交换 三维模型.pdf》由会员分享，可在线阅读，更多相关《BS PD ISO TS 13399-308-2016 Cutting tool data representation and exchange Creation and exchange of 3D models Milling cutters with arbor hole for indexable inserts《切削工具数据的表示和交换 三维模型.pdf（60页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationPD ISO/TS 13399-308:2016Cutting tool datarepresentation and exchangePart 308: Creation and exchange of 3Dmodels Milling cutters with arbor holefor indexable insertsPD ISO/TS 13399-308:2016 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of

2、 ISO/TS13399-308:2016.The UK participation in its preparation was entrusted to TechnicalCommittee MTE/18, Tools tips and inserts for cutting applications.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all

3、the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 92322 7ICS 25.100.01; 35.240.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This Pu

4、blished Document was published under the authority of theStandards Policy and Strategy Committee on 29 February 2016.Amendments issued since publicationDate Text affectedPD ISO/TS 13399-308:2016 ISO 2016Cutting tool data representation and exchange Part 308: Creation and exchange of 3D models Millin

5、g cutters with arbor hole for indexable insertsReprsentation et change des donnes relatives aux outils coupants Partie 308: Cration et change des modles 3D Fraises mtaux trou de fixation et plaquettes amoviblesTECHNICAL SPECIFICATIONISO/TS13399-308Reference numberISO/TS 13399-308:2016(E)First editio

6、n2016-02-01PD ISO/TS 13399-308:2016ISO/TS 13399-308:2016(E)ii ISO 2016 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, e

7、lectronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Ver

8、nier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgPD ISO/TS 13399-308:2016ISO/TS 13399-308:2016(E)Foreword vIntroduction vii1 Scope . 12 Normative references 13 Starting elements, coordinate systems, planes 23.1 General . 23.2 Reference system 23.3 Coordina

9、te system at the cutting part 33.4 Planes 33.5 Design of the pocket seat and cutting reference point (CRP) of the insert . 43.6 Adjustment coordinate system on workpiece side 73.6.1 General 73.6.2 Designation of the coordinate system workpiece side . 84 Design of the model . 94.1 General . 94.2 Nece

10、ssary parameters for the connection interface feature 104.3 Necessary properties for inserts 104.3.1 General. 104.3.2 Properties for equilateral, equiangular and equilateral, nonequiangular inserts 104.3.3 Properties for nonequilateral, equiangular and nonequilateral, nonequiangular inserts . 114.3.

11、4 Design of the pocket seat feature 125 Face milling cutter .125.1 General 125.2 Necessary properties 135.3 Basic geometry . 135.4 Determination of the position of the mounting coordinate system of insert 145.5 Chip flute and pocket seat 155.6 Face milling cutter, assembly . 166 Shoulder milling cut

12、ter .176.1 General 176.2 Necessary properties 176.3 Basic geometry . 176.4 Determination of the position of the mounting coordinate system of insert 176.5 Chip flute and pocket seat 186.6 Shoulder milling cutter, assembly . 187 Plain milling cutter .197.1 General 197.2 Necessary properties 197.3 Bas

13、ic geometry . 207.4 Determination of the position of the mounting coordinate system of insert 207.5 Chip flute and pocket seat 217.6 Plain milling cutter, assembly 238 Shell milling cutter 238.1 General 238.2 Necessary properties 248.3 Basic geometry . 248.4 Determination of the position of the moun

14、ting coordinate system of insert 258.5 Chip flute and pocket seat 258.6 Shell milling cutter, assembly 259 Full-side-slot milling cutter 25 ISO 2016 All rights reserved iiiContents PagePD ISO/TS 13399-308:2016ISO/TS 13399-308:2016(E)9.1 General 259.2 Necessary properties 269.3 Basic geometry . 269.4

15、 Determination of the position of the mounting coordinate system of insert 279.5 Chip flute and pocket seat 289.6 Assembly of a full-side slot milling cutter 3010 Half-side slot milling cutter .3110.1 General 3110.2 Necessary properties 3110.3 Basic geometry . 3110.4 Determination of the position of

16、 the mounting coordinate system of insert 3110.5 Chip flute and pocket seat 3210.6 Half-side slot milling cutter, assembly . 3211 Full-side profile slot milling cutter .3311.1 General 3311.2 Necessary properties 3311.3 Basic geometry . 3411.4 Determination of the position of the mounting coordinate

17、system of insert 3411.5 Chip flute and pocket seat 3411.6 Full-side profile slot milling cutter, assembly 3412 Full-side angular slot milling cutter 3512.1 General 3512.2 Necessary properties 3512.3 Basic geometry . 3612.4 Determination of the position of the mounting coordinate system of insert 361

18、2.5 Chip flute and pocket seat 3612.6 Full-side angular slot milling cutter, assembly . 3613 Saw blade/slitting cutter 3613.1 General 3613.2 Necessary properties 3713.3 Basic geometry . 3713.4 Determination of the position of the mounting coordinate system of insert 3813.5 Chip flute and pocket seat

19、 4013.6 Saw blade/slitting cutter, assembly . 4114 Design of details .4214.1 Basics for modelling 4214.2 Fixing threads for inserts 4214.3 Contact surfaces/drive keys Orientation . 4214.4 Chamfers, roundings, others 4215 Attributes of surfaces Visualization of the model features 4216 Structure of th

20、e design elements (tree of model) .4217 Data exchange model 43Annex A (informative) Information about nominal dimensions 45Bibliography .46iv ISO 2016 All rights reservedPD ISO/TS 13399-308:2016ISO/TS 13399-308:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide fe

21、deration of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that com

22、mittee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document a

23、nd those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Pa

24、rt 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of t

25、he document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific ter

26、ms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 29, Small tools.ISO/TS 1339

27、9 consists of the following parts, under the general title Cutting tool data representation and exchange: Part 1: Overview, fundamental principles and general information model Part 2: Reference dictionary for the cutting items Technical Specification Part 3: Reference dictionary for tool items Tech

28、nical Specification Part 4: Reference dictionary for adaptive items Technical Specification Part 5: Reference dictionary for assembly items Technical Specification Part 50: Reference dictionary for reference systems and common concepts Technical Specification Part 60: Reference dictionary for connec

29、tion systems Technical Specification Part 80: Creation and exchange of 3D models Overview and principles Technical Specification Part 100: Definitions, principles and methods for reference dictionaries Technical Specification Part 150: Usage guidelines Technical Specification Part 201: Creation and

30、exchange of 3D models Regular inserts Technical Specification Part 202: Creation and exchange of 3D models Irregular inserts Technical Specification Part 203: Creation and exchange of 3D models Replaceable inserts for drilling Technical Specification Part 204: Creation and exchange of 3D models Inse

31、rts for reaming Technical Specification Part 301: Concept for the design of 3D models based on properties according to ISO/TS 133993: Modelling of threadcutting taps, threadforming taps and threadcutting dies Technical Specification ISO 2016 All rights reserved vPD ISO/TS 13399-308:2016ISO/TS 13399-

32、308:2016(E) Part 302: Concept for the design of 3D models based on properties according to ISO/TS 133993: Modelling of solid drills and countersinking tools Technical Specification Part 303: Concept for the design of 3D models based on properties according to ISO/TS 133993: Modelling of end mills wi

33、th solid cutting edges Technical Specification Part 304: Concept for the design of 3D models based on properties according to ISO/TS 133993: Modelling of milling cutters with arbor hole and solid cutting edges Technical Specification Part 307: Creation and exchange of 3D models End mills for indexab

34、le inserts Technical Specification Part 308: Creation and exchange of 3D models Milling cutters with arbor hole for indexable inserts Technical Specification Part 309: Creation and exchange of 3D models Tool holders for indexable inserts Technical Specification Part 311: Creation and exchange of 3D

35、models Solid reamers Technical Specification Part 312: Creation and exchange of 3D models Reamers for indexable inserts Technical Specification Part 401: Creation and exchange of 3D models Converting, extending and reducing adaptive items Technical Specification Part 405: Creation and exchange of 3D

36、 models Collets Technical SpecificationThe following parts are under preparation: Part 70: Graphical data layout Layer settings for tool designs Technical Specification Part 71: Graphical data layout Creation of documents for the standardized data exchange Graphical product information Technical Spe

37、cification Part 72: Creation of documents for the standardized data exchange Definition of properties for drawing header and their XMLdata exchange Technical Specification Part 305: Creation and exchange of 3D models Modular tooling systems with adjustable cartridges for boring Technical Specificati

38、on Part 310: Creation and exchange of 3D models Turning tools with carbide tips Technical Specificationvi ISO 2016 All rights reservedPD ISO/TS 13399-308:2016ISO/TS 13399-308:2016(E)IntroductionThis part of ISO/TS 13399 defines the concept, the terms and the definitions on how to design simplified 3

39、D models of milling cutters with arbors hole for indexable inserts that can be used for NC-programming, simulation of the manufacturing processes and the determination of collision within machining processes. It is not intended to standardize the design of the cutting tool itself.A cutting tool is u

40、sed in a machine to remove material from a workpiece by a shearing action at the cutting edges of the tool. Cutting tool data that can be described by the ISO/TS 13399 series include, but are not limited to, everything between the workpiece and the machine tool. Information about inserts, solid tool

41、s, assembled tools, adaptors, components and their relationships can be represented by the ISO/TS 13399 series. The increasing demand providing the end-user with 3D models for the purposes defined above is the basis for the development of this series of International Standards.The objective of this

42、International Standard is to provide the means to represent the information that describes cutting tools in a computer sensible form that is independent from any particular computer system. The representation will facilitate the processing and exchange of cutting tool data within and between differe

43、nt software systems and computer platforms and support the application of this data in manufacturing planning, cutting operations and the supply of tools. The nature of this description makes it suitable not only for neutral file exchange, but also as a basis for implementing and sharing product dat

44、abases and for archiving. The methods that are used for these representations are those developed by ISO/TC 184 for the representation of product data by using standardized information models and reference dictionaries.Definitions and identifications of dictionary entries are defined by means of sta

45、ndard data that consist of instances of the EXPRESS entity data types defined in the common dictionary schema, resulting from a joint effort between ISO/TC 184/SC 4 and IEC/TC 3/SC 3D and in its extensions defined in ISO 13584-24 and ISO 13584-25. ISO 2016 All rights reserved viiPD ISO/TS 13399-308:

46、2016PD ISO/TS 13399-308:2016Cutting tool data representation and exchange Part 308: Creation and exchange of 3D models Milling cutters with arbor hole for indexable inserts1 ScopeThis part of ISO/TS 13399 specifies a concept for the design of tool items, limited to any kind of milling cutters with a

47、rbor hole for indexable inserts, together with the usage of the related properties and domains of values.This part of ISO/TS 13399 specifies a common way of design simplified models that contain the following: definitions and identifications of the design features of milling cutters with arbor hole

48、for indexable inserts, with an association to the used properties; definitions and identifications of the internal structure of the 3D model that represents the features and the properties of milling cutters with arbor hole for indexable inserts.The following are outside the scope of this part of IS

49、O/TS 13399: applications where these standard data may be stored or referenced; concept of 3D models for cutting tools; concept of 3D models for cutting items; concept of 3D models for other tool items not being described in the scope of this part of ISO/TS 13399; concept of 3D models for adaptive items; concept of 3D models for assembly items and auxiliary items.2 Normative referencesThe following d