BS PD ISO TS 13399-305-2017 Cutting tool data representation and exchange Creation and exchange of 3D models Modular tooling systems with adjustable cartridges for boring《切削工具数据表示和.pdf

《BS PD ISO TS 13399-305-2017 Cutting tool data representation and exchange Creation and exchange of 3D models Modular tooling systems with adjustable cartridges for boring《切削工具数据表示和.pdf》由会员分享，可在线阅读，更多相关《BS PD ISO TS 13399-305-2017 Cutting tool data representation and exchange Creation and exchange of 3D models Modular tooling systems with adjustable cartridges for boring《切削工具数据表示和.pdf（86页珍藏版）》请在麦多课文档分享上搜索。

1、Cutting tool data representation and exchangePart 305: Creation and exchange of 3D models Modular tooling systems with adjustable cartridges for boringPD ISO/TS 13399-305:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis Published Document is

2、the UK implementation of ISO/TS 13399-305:2017.The UK participation in its preparation was entrusted to TechnicalCommittee MTE/18, Tools tips and inserts for cutting applications.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does no

3、t purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 92986 1ICS 25.100.01; 35.240.50Compliance with a British Standard cannot confer immunity fro

4、mlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate Text affectedPUBLISHED DOCUMENTPD ISO/TS 13399-305:2017 ISO 2017Cutting tool data representation and exchan

5、ge Part 305: Creation and exchange of 3D models Modular tooling systems with adjustable cartridges for boringReprsentation et change des donnes relatives aux outils coupants Partie 305: Cration et change des modles 3D Systmes doutils modulables avec cartouches rglables pour alsageTECHNICAL SPECIFICA

6、TIONISO/TS13399-305Reference numberISO/TS 13399-305:2017(E)First edition2017-01PD ISO/TS 13399-305:2017ISO/TS 13399-305:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication ma

7、y be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the

8、 requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgPD ISO/TS 13399-305:2017ISO/TS 13399-305:2017(E)Foreword viIntroduction vii1 Scope . 12 Normative references 13 Terms and definitions . 24

9、Starting elements, coordinate systems, planes 24.1 General . 24.2 Reference system 24.3 Mounting coordinate system 34.4 Coordinate system at the cutting part 44.5 Planes 54.6 Adjustment coordinate system on workpiece side 64.6.1 General 64.6.2 Designation of the coordinate system workpiece side . 74

10、.6.3 Arrangement of coordinate system workpiece side 84.7 Design of the pocket seat and cutting reference point (CRP) of the insert . 95 Design of the model 135.1 General 135.2 Necessary parameters for the connection interface feature 135.3 Necessary properties for insert and pocket seat 145.3.1 Gen

11、eral. 145.3.2 Properties for equilateral, equiangular and equilateral, non-equiangular inserts .145.3.3 Properties for non-equilateral, equiangular and non-equilateral, non-equiangular inserts .155.3.4 Properties for round inserts . 155.3.5 Design of the pocket seat feature 166 Basic shapes for exte

12、nsion bridges, adjustment and assembly parts 166.1 Monoblock extension bridges with adaptor . 166.1.1 General. 166.1.2 Necessary properties 166.1.3 Basic geometry . 176.2 Bridge tool adapter 196.2.1 General. 196.2.2 Necessary properties 196.2.3 Basic geometry . 196.3 Bridge tool 206.3.1 General. 206

13、.3.2 Necessary properties 216.3.3 Basic geometry . 216.4 Slide for adjustable units . 226.4.1 General. 226.4.2 Necessary properties 226.4.3 Basic geometry of slides for adjustable units 226.5 Slide element . 236.5.1 General. 236.5.2 Necessary properties 246.5.3 Basic geometry of slide elements . 246

14、.6 Balance weight . 256.6.1 General. 256.6.2 Necessary properties 266.6.3 Basic geometry of balance weights . 26 ISO 2017 All rights reserved iiiContents PagePD ISO/TS 13399-305:2017ISO/TS 13399-305:2017(E)7 Basic shapes for cartridges and insert holders .277.1 Adjustable unit . 277.1.1 General. 277

15、.1.2 Necessary properties 287.1.3 Basic geometry of adjustable units . 287.2 Boring head for adjustable units 297.2.1 General. 297.2.2 Necessary properties 307.2.3 Basic geometry of boring heads for adjustable units 308 Basic shapes of rotating boring systems .318.1 General 318.2 Assembled single-po

16、int bridge tool . 318.2.1 General. 318.2.2 Necessary properties 328.2.3 Assembled model of single-point bridge tool 338.3 Assembled single-point bridge tool for reverse internal operations 358.3.1 General. 358.3.2 Necessary properties 368.3.3 Assembled model of single-point bridge tool for reverse o

17、perations 368.4 Assembled multi-point bridge tool. 378.4.1 General. 378.4.2 Necessary properties 388.4.3 Assembled model of multi-point bridge tool .398.5 Assembled single-point bridge tool for external operations408.5.1 General. 408.5.2 Necessary properties 408.5.3 Assembled model of single-point b

18、ridge tool for external operations 418.6 Assembled multi-point bridge tool for external operations .428.6.1 General. 428.6.2 Necessary properties 438.6.3 Assembled model of a multi-point bridge tool for external operations 438.7 Single-point bridge tool for axial grooving 448.7.1 General. 448.7.2 Ne

19、cessary properties 458.7.3 Assembled model of single-point bridge tool for axial grooving 468.8 Assembled multi-point bridge tool for axial grooving .478.8.1 General. 478.8.2 Necessary properties 478.8.3 Assembled model of multi-point bridge tool for axial grooving 478.9 Boring head . 488.9.1 Genera

20、l. 488.9.2 Necessary properties 498.9.3 Assembled model of boring head . 498.10 Fine boring head with boring bar 508.10.1 General. 508.10.2 Necessary properties 508.10.3 Assembled model of fine boring head with boring bar .518.11 Boring head with adjustable unit . 528.11.1 General. 528.11.2 Necessar

21、y properties 528.11.3 Assembled model of boring head with adjustable unit .539 Design of details .549.1 Basis for modelling . 549.2 Fixing threads for inserts 549.3 Contact/clamping surfaces Orientation 549.4 Chamfers and roundings . 5410 Attributes of surfaces Visualization of model features 55iv I

22、SO 2017 All rights reservedPD ISO/TS 13399-305:2017ISO/TS 13399-305:2017(E)11 Data exchange model 55Annex A (informative) Information about nominal dimensions 67Annex B (informative) STP structure 68Bibliography .73 ISO 2017 All rights reserved vPD ISO/TS 13399-305:2017ISO/TS 13399-305:2017(E)Forewo

23、rdISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technica

24、l committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of ele

25、ctrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was

26、drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent

27、 rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not con

28、stitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/is

29、o/foreword.html.The committee responsible for this document is ISO/TC 29, Small tools.A list of all parts in the ISO 13399 series can be found on the ISO website.vi ISO 2017 All rights reservedPD ISO/TS 13399-305:2017ISO/TS 13399-305:2017(E)IntroductionThis document defines the concept, the terms an

30、d the definitions of how to design simplified 3D models of modular tooling systems with adjustable cartridges for boring that can be used for NC-programming, simulation of the manufacturing processes and the determination of collision within machining processes. It is not intended to standardize the

31、 design of the cutting tool itself.A cutting tool is used in a machine to remove material from a workpiece by a shearing action at the cutting edges of the tool. Cutting tool data that can be described by ISO 13399 include, but are not limited to, everything between the workpiece and the machine too

32、l. Information about inserts, solid tools, assembled tools, adaptors, components and their relationships can be represented by this document. The increasing demand providing the end user with 3D models for the purposes defined above is the basis for the development of the ISO 13399 series.The object

33、ive of ISO 13399 series is to provide the means to represent the information that describes cutting tools in a computer sensible form that is independent from any particular computer system. The representation will facilitate the processing and exchange of cutting tool data within and between differ

34、ent software systems and computer platforms and support the application of this data in manufacturing planning, cutting operations and the supply of tools. The nature of this description makes it suitable not only for neutral file exchange, but also as a basis for implementing and sharing product da

35、tabases and for archiving. The methods that are used for these representations are those developed by ISO/TC 184/SC 4 for the representation of product data by using standardized information models and reference dictionaries.Definitions and identifications of dictionary entries are defined by means

36、of standard data that consist of instances of the EXPRESS entity data types defined in the common dictionary schema, resulting from a joint effort between ISO/TC 184/SC 4 and IEC/TC 3/SC 3D, and in its extensions defined in ISO 13584-24 and ISO 13584-25. ISO 2017 All rights reserved viiPD ISO/TS 133

37、99-305:2017Cutting tool data representation and exchange Part 305: Creation and exchange of 3D models Modular tooling systems with adjustable cartridges for boring1 ScopeThis document specifies a concept for the design of tool items, for all kinds of modular tooling systems with adjustable cartridge

38、s for boring, together with the usage of the related properties and domains of values.This document specifies a common way of designing simplified models that contain the following: definitions and identifications of the design features of modular tooling systems with adjustable cartridges for borin

39、g, with an association to the used properties; definitions and identifications of the internal structure of the 3D model that represents the features and the properties of modular tooling systems with adjustable cartridges for boring.The following are outside the scope of this document:a) applicatio

40、ns where these standard data may be stored or referenced;b) concept of 3D models for cutting tools;c) concept of 3D models for cutting items;d) concept of 3D models for other tool items not being described in the scope of this document;e) concept of 3D models for adaptive items;f) concept of 3D mode

41、ls for assembly items and auxiliary items.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edit

42、ion of the referenced document (including any amendments) applies.ISO/TS 13399-50, Cutting tool data representation and exchange Part 50: Reference dictionary for reference systems and common conceptsISO/TS 13399-80, Cutting tool data representation and exchange Part 80: Creation and exchange of 3D

43、models Overview and principlesISO/TS 13399-201, Cutting tool data representation and exchange Part 201: Creation and exchange of 3D models Regular insertsISO/TS 13399-202, Cutting tool data representation and exchange Part 202: Creation and exchange of 3D models Irregular insertsTECHNICAL SPECIFICAT

44、ION ISO/TS 13399-305:2017(E) ISO 2017 All rights reserved 1PD ISO/TS 13399-305:2017ISO/TS 13399-305:2017(E)3 Terms and definitionsNo terms and definitions are listed in this document.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia

45、: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp4 Starting elements, coordinate systems, planes4.1 GeneralThe modelling of the 3D models shall be done by means of nominal dimensions. Some examples of nominal dimensions are given in Annex A.W

46、ARNING There is no guarantee that the 3D model, created according to the methods described in this document, is a true representation of the physical tool supplied by the tool manufacturer. If the models are used for simulation purposes, e.g. CAM simulation, it shall be taken into consideration that

47、 the real product dimensions can differ from those nominal dimensions.NOTE 1 Some of the definitions have been taken from ISO/TS 13399-50.NOTE 2 ISO 10303-242 (STEP 3D) allow to write sub-assemblies as separate STEP 3D files.4.2 Reference systemThe reference system shall consist of the following sta

48、ndard elements as shown in Figure 1: standard coordinate system: right-handed rectangular Cartesian system in three-dimensional space, called “primary coordinate system” (PCS); three orthogonal planes: planes in the coordinate system that contain the axis of the system, named “XY-plane” (XYP), “XZ-p

49、lane” (XZP) and “YZ-plane” (YZP); three orthogonal axis: axes built as intersections of the three orthogonal plane lines respectively, named “X-axis” (XA), “Y-axis” (YA) and “Z-axis” (ZA).2 ISO 2017 All rights reservedPD ISO/TS 13399-305:2017ISO/TS 13399-305:2017(E)Figure 1 Primary coordinate system4.3 Mounting coordinate systemFor the virtual mounting of components of modular systems either on an adaptive item or on another component, an additional reference system shall be defined. This refere