BS ISO IEC 29341-12-10-2015 Information technology UPnP Device Architecture Remote User Interface Device Control Protocol Remote User Interface Client Service《信息技术 UPnP设备架构 远程用户接口设.pdf

《BS ISO IEC 29341-12-10-2015 Information technology UPnP Device Architecture Remote User Interface Device Control Protocol Remote User Interface Client Service《信息技术 UPnP设备架构 远程用户接口设.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 29341-12-10-2015 Information technology UPnP Device Architecture Remote User Interface Device Control Protocol Remote User Interface Client Service《信息技术 UPnP设备架构 远程用户接口设.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS ISO/IEC 29341-12-10:2015Information technology UPnP Device ArchitecturePart 12-10: Remote User Interface DeviceControl Protocol Remote User InterfaceClient ServiceBS ISO/IEC 29341-12-10:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation o

2、f ISO/IEC 29341-12-10:2015.The UK participation in its preparation was entrusted to Technical Committee IST/6, Data communications.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisio

3、ns of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 88292 0ICS 35.200Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published unde

4、r the authority of the Standards Policy and Strategy Committee on 30 June 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dInformation technology UPnP Device Architecture Part 12-10: Remote User Interface Device Control Protocol Remote User Interface Client ServiceTechn

5、ologies de linformation Architecture de dispositif UPnP Partie 12-10: Protocole de contrle de dispositif dinterface utilisateur distance Service client dinterface utilisateur distanceINTERNATIONAL STANDARDISO/IEC 29341-12-10Reference numberISO/IEC 29341-12-10:2015(E)Second edition2015-06-15 ISO/IEC

6、2015BS ISO/IEC 29341-12-10:2015ii ISO/IEC 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO/IEC 2015All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopyin

7、g, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail

8、copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandISO/IEC 29341-12-10:2015(E)BS ISO/IEC 29341-12-10:2015CONTENTS Foreword . v Introduction vi 1. Scope 12. Normative References 13. Service Modeling Definitions . 23.1. ServiceType . 2 3.2. State Variables . 2 3.2.1. CompatibleUIsUpdateIDEvent 2 3

9、.2.2. CurrentConnections 2 3.2.3. CurrentConnectionsEvent . 3 3.2.4. DeviceProfile . 3 3.2.5. A_ARG_TYPE_CompatibleUIs . 3 3.2.6. A_ARG_TYPE_DisplayMessageType 3 3.2.7. A_ARG_TYPE_InputDataType . 3 3.2.8. A_ARG_TYPE_Int 4 3.2.9. A_ARG_TYPE_String . 4 3.3. Eventing and Moderation . 4 3.3.1. Relations

10、hips Between State Variables 4 3.4. Actions 5 3.4.1. Connect . 5 3.4.2. Disconnect 6 3.4.3. GetCurrentConnections 7 3.4.4. GetDeviceProfile . 8 3.4.5. GetUIListing 9 3.4.6. AddUIListing 9 3.4.7. RemoveUIListing . 10 3.4.8. DisplayMessage 11 3.4.9. ProcessInput . 12 3.4.10. Non-Standard Actions Imple

11、mented by a UPnP Vendor . 13 3.4.11. Relationships Between Actions . 13 3.4.12. Common Error Codes . 14 4. Theory of Operation 154.1. Example Values of State Variables 15 4.1.1. A_ARG_TYPE_URI 15 4.1.2. CurrentConnections 16 4.1.3. A_ARG_TYPE_CompatibleUIs . 16 4.1.4. DeviceProfile . 17 4.2. Remote

12、UI Scenarios for the Basic DCP . 18 4.2.1. Connect, Disconnect and GetCurrentConnections . 18 4.2.2. Add, Get and Remove UI Listings . 18 4.2.3. Display Message . 18 4.2.4. Process Input 18 4.3. Remote UI Scenarios for the Advanced DCP 19 4.3.1. Mirror . 19 4.3.2. Move . 19 4.3.3. Reconnect . 19 4.4

13、. Types of Client Devices 20 ISO/IEC 29341-12-10:2015(E)BS ISO/IEC 29341-12-10:20154.4.1. Autonomous Remote UI Clients . 20 4.4.2. Fully Remoted Remote UI Clients . 20 5. DeviceProfile XSD Schema 216. A_ARG_TYPE_CompatibleUIs XSD Schema 227. XML Service Description 23LIST OF TABLES Table 1: Service

14、State Variables 2 Table 2: Allowed value list for state variable A_ARG_TYPE_DisplayMessageType . 3 Table 3: Allowed value list for state variable A_ARG_TYPE_InputDataType . 3 Table 4: Event moderation 4 Table 5: Actions 5 Table 6: Arguments for Connect() 5 Table 7: Arguments for Disconnect() 6 Table

15、 8: Arguments for GetCurrentConnections() 7 Table 9: Arguments for GetDeviceProfile() . 8 Table 10: Arguments for GetUIListing() 9 Table 11: Arguments for AddUIListing() 9 Table 12: Arguments for RemoveUIListing() . 10 Table 13: Arguments for DisplayMessage() . 11 Table 14. Arguments for ProcessInpu

16、t() 12 Table 15: Common Error Codes. 14 ISO/IEC 29341-12-10:2015(E)BS ISO/IEC 29341-12-10:2015For ewor d ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that ar

17、e members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other internation

18、al organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its furth

19、er maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see http:/www.iso.org/directiv

20、es). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be i

21、n the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of the ISO specific terms and expressi

22、ons related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword Supplementary information ISO/IEC 29341-12-10 was prepared by UPnP Implementers Corporation and adopted, under the PAS proc

23、edure, by joint technical committee ISO/IEC JTC 1. Information technology, in parallel with its approval by national bodies of ISO and IEC. This second edition replaces the first edition (ISO/IEC 29341-12-10:2008), which has been technically revised. The list of all currently available parts of ISO/

24、IEC 29341 series, under the general title Information technology UPnP Device Architecture, can be found on the ISO web site. ISO/IEC 2015 - All rights reserved ISO/IEC 29341-12-10:2015(E)BS ISO/IEC 29341-12-10:2015I ntroduction ISO and IEC draw attention to the fact that it is claimed that complianc

25、e with this document may involve the use of patents as indicated below. ISO and IEC take no position concerning the evidence, validity and scope of these patent rights. The holders of -these patent rights have assured ISO and IEC that they are willing to negotiate licenses under reasonable and non-d

26、iscriminatory terms and conditions with applicants throughout the world. In this respect, the statements of the holders of these patent rights are registered with ISO and IEC. Original UPnP Documents Reference may be made in this document to original UPnP documents. These references are retained in

27、order to maintain consistency between the specifications as published by ISO/IEC and by UPnP Implementers Corporation. The following table indicates the original UPnP document titles and the corresponding part of ISO/IEC 29341: UPnP Document Title ISO/IEC 29341 Part UPnP Device Architecture 1.0 ISO/

28、IEC 29341-1 UPnP Basic:1 Device ISO/IEC 29341-2 UPnP AV Architecture:1 ISO/IEC 29341-3-1 UPnP MediaRenderer:1 Device ISO/IEC 29341-3-2 UPnP MediaServer:1 Device ISO/IEC 29341-3-3 UPnP AVTransport:1 Service ISO/IEC 29341-3-10 UPnP ConnectionManager:1 Service ISO/IEC 29341-3-11 UPnP ContentDirectory:1

29、 Service ISO/IEC 29341-3-12 UPnP RenderingControl:1 Service ISO/IEC 29341-3-13 UPnP MediaRenderer:2 Device ISO/IEC 29341-4-2 UPnP MediaServer:2 Device ISO/IEC 29341-4-3 UPnP AV Datastructure Template:1 ISO/IEC 29341-4-4 UPnP AVTransport:2 Service ISO/IEC 29341-4-10 UPnP ConnectionManager:2 Service I

30、SO/IEC 29341-4-11 UPnP ContentDirectory:2 Service ISO/IEC 29341-4-12 UPnP RenderingControl:2 Service ISO/IEC 29341-4-13 UPnP ScheduledRecording:1 ISO/IEC 29341-4-14 UPnP DigitalSecurityCamera:1 Device ISO/IEC 29341-5-1 UPnP DigitalSecurityCameraMotionImage:1 Service ISO/IEC 29341-5-10 UPnP DigitalSe

31、curityCameraSettings:1 Service ISO/IEC 29341-5-11 UPnP DigitalSecurityCameraStillImage:1 Service ISO/IEC 29341-5-12 UPnP HVAC_System:1 Device ISO/IEC 29341-6-1 UPnP HVAC_ZoneThermostat:1 Device ISO/IEC 29341-6-2 UPnP ControlValve:1 Service ISO/IEC 29341-6-10 UPnP HVAC_FanOperatingMode:1 Service ISO/

32、IEC 29341-6-11 UPnP FanSpeed:1 Service ISO/IEC 29341-6-12 UPnP HouseStatus:1 Service ISO/IEC 29341-6-13 UPnP HVAC_SetpointSchedule:1 Service ISO/IEC 29341-6-14 UPnP TemperatureSensor:1 Service ISO/IEC 29341-6-15 UPnP TemperatureSetpoint:1 Service ISO/IEC 29341-6-16 UPnP HVAC_UserOperatingMode:1 Serv

33、ice ISO/IEC 29341-6-17 UPnP BinaryLight:1 Device ISO/IEC 29341-7-1 UPnP DimmableLight:1 Device ISO/IEC 29341-7-2 UPnP Dimming:1 Service ISO/IEC 29341-7-10 UPnP SwitchPower:1 Service ISO/IEC 29341-7-11 UPnP InternetGatewayDevice:1 Device ISO/IEC 29341-8-1 UPnP LANDevice:1 Device ISO/IEC 29341-8-2 UPn

34、P WANDevice:1 Device ISO/IEC 29341-8-3 UPnP WANConnectionDevice:1 Device ISO/IEC 29341-8-4 UPnP WLANAccessPointDevice:1 Device ISO/IEC 29341-8-5 UPnP LANHostConfigManagement:1 Service ISO/IEC 29341-8-10 UPnP Layer3Forwarding:1 Service ISO/IEC 29341-8-11 UPnP LinkAuthentication:1 Service ISO/IEC 2934

35、1-8-12 UPnP RadiusClient:1 Service ISO/IEC 29341-8-13 UPnP WANCableLinkConfig:1 Service ISO/IEC 29341-8-14 UPnP WANCommonInterfaceConfig:1 Service ISO/IEC 29341-8-15 UPnP WANDSLLinkConfig:1 Service ISO/IEC 29341-8-16 UPnP WANEthernetLinkConfig:1 Service ISO/IEC 29341-8-17 UPnP WANIPConnection:1 Serv

36、ice ISO/IEC 29341-8-18 UPnP WANPOTSLinkConfig:1 Service ISO/IEC 29341-8-19 UPnP WANPPPConnection:1 Service ISO/IEC 29341-8-20 UPnP WLANConfiguration:1 Service ISO/IEC 29341-8-21 UPnP Printer:1 Device ISO/IEC 29341-9-1 ISO/IEC 29341-12-10:2015(E)BS ISO/IEC 29341-12-10:2015UPnP Document Title ISO/IEC

37、29341 Part UPnP Scanner:1.0 Device ISO/IEC 29341-9-2 UPnP ExternalActivity:1 Service ISO/IEC 29341-9-10 UPnP Feeder:1.0 Service ISO/IEC 29341-9-11 UPnP PrintBasic:1 Service ISO/IEC 29341-9-12 UPnP Scan:1 Service ISO/IEC 29341-9-13 UPnP QoS Architecture:1.0 ISO/IEC 29341-10-1 UPnP QosDevice:1 Service

38、 ISO/IEC 29341-10-10 UPnP QosManager:1 Service ISO/IEC 29341-10-11 UPnP QosPolicyHolder:1 Service ISO/IEC 29341-10-12 UPnP QoS Architecture:2 ISO/IEC 29341-11-1 UPnP QOS v2 Schema Files ISO/IEC 29341-11-2 UPnP QosDevice:2 Service ISO/IEC 29341-11-10 UPnP QosManager:2 Service ISO/IEC 29341-11-11 UPnP

39、 QosPolicyHolder:2 Service ISO/IEC 29341-11-12 UPnP RemoteUIClientDevice:1 Device ISO/IEC 29341-12-1 UPnP RemoteUIServerDevice:1 Device ISO/IEC 29341-12-2 UPnP RemoteUIClient:1 Service ISO/IEC 29341-12-10 UPnP RemoteUIServer:1 Service ISO/IEC 29341-12-11 UPnP DeviceSecurity:1 Service ISO/IEC 29341-1

40、3-10 UPnP SecurityConsole:1 Service ISO/IEC 29341-13-11 ISO/IEC 29341-12-10:2015(E)BS ISO/IEC 29341-12-10:2015ISO/IEC 29341-12-10:2015(E)BS ISO/IEC 29341-12-10:2015INFORMATION TECHNOLOGY UPNP DEVICE ARCHITECTURE Part 12-10: Remote User Interface Device Control Protocol Remote User Interface Client S

41、ervice 1. Scope This service definition is compliant with the UPnP Device Architecture version 1.0. This service-type encapsulates the management of an out-of-band remoting protocol connection to a device capable of user interaction. This service is required for all Remote UI clients. It is specifie

42、d in: urn:schemas-upnp-org:device:RemoteUIClientDevice 2. Nor mative Refer ences The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the late

43、st edition of the referenced document (including any amendments) applies. ISO/IEC 29341-4-12, Information Technology UPnP Device Architecture Part 4-12: Audio video Device Control Protocol Level 2 Content Directory Service IETF RFC 1738, Uniform Resource Locators (URL), Tim Berners-Lee, et. Al., Dec

44、ember 1994. Available at: http:/www.ietf.org/rfc/rfc1738.txt. IETF RFC 3986, Uniform Resource Identifiers (URI): Generic Syntax, Tim Berners-Lee, et al, 2005. Available at: http:/www.ietf.org/rfc/rfc3986.txt. ISO/IEC 29341-12-10:2015(E)BS ISO/IEC 29341-12-10:20153. Service Modeling Definitions 3.1.

45、ServiceType The following service type identifies a service that is compliant with this template: urn:schemas-upnp-org:service:RemoteUIClient:1. 3.2. State Variables Table 1: Service State Variables Variable Name Req. or Opt.1Data Type Allowed Value Default Value 2Eng. Units DeviceProfile R string U

46、ndefined Empty string N/A CurrentConnections R string Undefined Empty string N/A CurrentConnectionsEvent O string Undefined Empty string N/A CompatibleUIsUpdateIDEvent O i4 Undefined Undefined N/A A_ARG_TYPE_String O string Undefined Empty string N/A A_ARG_TYPE_CompatibleUIs O string Undefined Empty

47、 string N/A A_ARG_TYPE_DisplayMessageType O string Undefined Empty string N/A A_ARG_TYPE_InputDataType O string Undefined Empty string N/A A_ARG_TYPE_Int O i4 Undefined Undefined N/A Non-standard state variables implemented by a UPnP vendor go here. X TBD TBD TBD TBD 1R = Required, O = Optional, X =

48、 Non-standard. 2Default values listed in this column are required. To specify standard optional values or to delegate assignment of values to the vendor, you must reference a specific instance of an appropriate table below. 3.2.1. CompatibleUIsUpdateIDEvent CompatibleUIsUpdateIDEvent is an optional,

49、 evented integer state variable used to indicate a change in the state of the A_ARG_TYPE_CompatibleUIs listing optionally stored on the client device. CompatibleUIsUpdateIDEvent is incremented and evented every time a change in A_ARG_TYPE_CompatibleUIs occurs. The value rolls over to one once it reaches the maximum value. The maximum value is 2147483647. 3.2.2. CurrentConnections This required variable is a comma-separated value list representing all current Remote UI client sessions. See 1.3.1 in ISO/IEC 29341-4-12 for detailed definition