BS ISO 3294-2016 Parallel shank countersinks for angles 60 90 and 120 degrees inclusive《60、90和120的直柄锪钻》.pdf

《BS ISO 3294-2016 Parallel shank countersinks for angles 60 90 and 120 degrees inclusive《60、90和120的直柄锪钻》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 3294-2016 Parallel shank countersinks for angles 60 90 and 120 degrees inclusive《60、90和120的直柄锪钻》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BS ISO 3294:2016Parallel shank countersinks forangles 60, 90 and 120 degreesinclusiveBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS ISO 3294:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 3294:2016.The UK participation

2、 in its preparation was entrusted to TechnicalCommittee MTE/18, Tools tips and inserts for cutting applications.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Use

3、rs are responsible for its correctapplication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 85779 9ICS 25.100.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of t

4、heStandards Policy and Strategy Committee on 31 July 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS ISO 3294:2016 ISO 2016Parallel shank countersinks for angles 60, 90 and 120 degrees inclusiveOutils chanfreiner queue cylindrique, angle au sommet de 60, 90 et 120 d

5、egrsINTERNATIONAL STANDARDISO3294Second edition 2016-08-01Reference numberISO 3294:2016(E)BS ISO 3294:2016ISO 3294:2016(E)ii ISO 2016 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be

6、reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requ

7、ester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 3294:2016ISO 3294:2016(E)Foreword iv1 Scope . 12 Dimensions . 1Annex A (informative) Relationship between designations in this Internatio

8、nal Standard and ISO 13399 . 3Bibliography 4 ISO 2016 All rights reserved iiiContents PageBS ISO 3294:2016ISO 3294:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International S

9、tandards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, als

10、o take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. I

11、n particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the element

12、s of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (

13、see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence

14、 to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.htmlThe committee responsible for this document is ISO/TC 29, Small tools, Subcommittee SC 9, Tools with defined cutting edges, cutting items.This second edition

15、 cancels and replaces the first edition (ISO 3294:1975), of which it constitutes a minor revision.iv ISO 2016 All rights reservedBS ISO 3294:2016INTERNATIONAL STANDARD ISO 3294:2016(E)Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive1 ScopeThis International Standard specifies

16、the dimensions of parallel shank countersinks for angles 60, 90 and 120 inclusive.It specifies dimensions in metric units only, these being regarded as the only recommended dimensions in the future, for countersinks with cutting diameters in the range 8 mm to 25 mm.The dimensions apply only to tools

17、 made from high-speed steel. However, if the method of production allows, the shanks may be manufactured from a suitable alternative material, such as a carbon steel.Unless otherwise indicated, the countersinks will be right-hand cutting.Morse taper shank countersinks are the subject of ISO 3293.2 D

18、imensionsSee Figure 1 and Table 1.Key= 60, 90 or 120 inclusive (tolerance: 10)Figure 1 ISO 2016 All rights reserved 1BS ISO 3294:2016ISO 3294:2016(E)Table 1Dimensions in millimetresNominal sized1Small diameterd2aOverall lengthl1Body lengthl2Shank diameterd3h9 = 60 = 90 and 120 = 60 = 90 and 12081012

19、,51620251,622,53,247485052606469444648566065161820242833121416202429888101010aFront end design optional.2 ISO 2016 All rights reservedBS ISO 3294:2016ISO 3294:2016(E)Annex A (informative) Relationship between designations in this International Standard and ISO 13399A.1 Relationship between designati

20、onsFor the relationship between the designations in this International Standard and preferred symbols according to ISO 13399, see Table A.1.Table A.1 Relationship between designations in this International Standard and ISO 13399Symbol in ISO 3294 (this International Standard)Reference in ISO 3294 (t

21、his International Standard)Property name in the ISO 13399 seriesSymbol in the ISO 13399 seriesReference in the ISO 13399 seriesd1Clause 2, Figure 1 and Table 1Cutting diameter DCISO/TS 13399-3BSU 71D084653E57Fd2Clause 2, Figure 1 and Table 1Interference cutting diameter DCINTFISO/TS 13399-3BSU 726E2

22、FCC0EC78d3Clause 2, Figure 1 and Table 1Connection diameter machine sideDCONMSISO/TS 13399-3BSU 71EBDBF5060E6l1Clause 2, Figure 1 and Table 1Overall length OALISO/TS 13399-3BSU 71D078EB7C086l2Clause 2, Figure 1 and Table 1Head length LHISO/TS 13399-3BSU 71D07574A61E8Clause 2, Figure 1 and Table 1Poi

23、nt angle SIGISO/TS 13399-3BSU 71DCCC4FEF366 ISO 2016 All rights reserved 3BS ISO 3294:2016ISO 3294:2016(E)Bibliography1 ISO 3293, Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive2 ISO 13399 (all parts), Cutting tool data representation and exchange4 ISO 2016

24、 All rights reservedBS ISO 3294:2016BS ISO 3294:2016ISO 3294:2016(E) ISO 2016 All rights reservedICS 25.100.30Price based on 4 pagesThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services

25、.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expe

26、rtise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on stan

27、dardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including Brit

28、ish and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicati

29、onsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publ

30、ication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written

31、consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named u

32、ser only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reprod

33、uced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permiss

34、ion to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instan

35、t access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in

36、 single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Membe

37、r and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current.

38、For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publicat

39、ion please inform the Knowledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20