BS ISO 12637-3-2009 Graphic technology - Vocabulary - Printing terms《图形技术 词汇表 印刷术语》.pdf

《BS ISO 12637-3-2009 Graphic technology - Vocabulary - Printing terms《图形技术 词汇表 印刷术语》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 12637-3-2009 Graphic technology - Vocabulary - Printing terms《图形技术 词汇表 印刷术语》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BS ISO12637-3:2009ICS 01.040.37; 37.100.01NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDGraphic technology VocabularyPart 3: Printing termsThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June2009 BSI

2、 2009ISBN 978 0 580 55871 9Amendments/corrigenda issued since publicationDate CommentsBS ISO 12637-3:2009National forewordThis British Standard is the UK implementation of ISO 12637-3:2009. Itsupersedes BS ISO 12637-5:2001 which is withdrawn.The UK participation in its preparation was entrusted to T

3、echnicalCommittee PAI/43, Graphic technology.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. Compliance with a B

4、ritish Standard cannot confer immunityfrom legal obligations.BS ISO 12637-3:2009Reference numberISO 12637-3:2009(E)ISO 2009INTERNATIONAL STANDARD ISO12637-3First edition2009-04-15Graphic technology Vocabulary Part 3: Printing terms Technologie graphique Vocabulaire Partie 3: Termes dimpression BS IS

5、O 12637-3:2009ISO 12637-3:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the e

6、diting. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can

7、be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat

8、at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2009 The reproduction of the terms and definitions contained in this International Standard is permitted in teaching manuals, instruction booklets, technical publications and journals for strictly educational or implementation purposes. Th

9、e conditions for such reproduction are: that no modifications are made to the terms and definitions; that such reproduction is not permitted for dictionaries or similar publications offered for sale; and that this International Standard is referenced as the source document. With the sole exceptions

10、noted above, no other part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyri

11、ght office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2009 All rights reservedBS ISO 12637-3:2009ISO 12637-3:2009(E) ISO 2009 All rights reserved iiiForeword ISO (the International Organizatio

12、n for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has

13、 the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Inter

14、national Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publicat

15、ion as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent righ

16、ts. ISO 12637-3 was prepared by Technical Committee ISO/TC 130, Graphic technology. This first edition cancels and replaces ISO 12637-5:2001, of which the terms and definitions have been incorporated. ISO 12637 consists of the following parts, under the general title Graphic technology Vocabulary: P

17、art 1: Fundamental terms Part 2: Prepress terms Part 3: Printing terms Part 4: Postpress terms BS ISO 12637-3:2009ISO 12637-3:2009(E) iv ISO 2009 All rights reservedIntroduction Documentation gives rise to numerous international exchanges of both intellectual and material nature. These exchanges oft

18、en become difficult, either because of the great variety of terms used in various fields or languages to express the same concept, or because of the absence or the imprecision of useful concepts. To avoid misunderstandings due to this situation and to facilitate such exchanges, it is advisable to se

19、lect terms to be used in various languages or in various countries to express the same concept and to establish definitions providing satisfactory equivalents for the various terms in different languages. The purpose of this part of ISO 12637 is to provide definitions that are rigorous, uncomplicate

20、d and which can be understood by all concerned. This part of ISO 12637 contains terms and definitions of printing technology and addresses printing systems and processes. BS ISO 12637-3:2009INTERNATIONAL STANDARD ISO 12637-3:2009(E) ISO 2009 All rights reserved 1Graphic technology Vocabulary Part 3:

21、 Printing terms Scope This part of ISO 12637 defines terms for printing systems and processes. Terms and definitions 1 analogue copying machine image-producing device that operates by transferring the original image via a lens onto a photosensitive substrate and creates a visual image by utilizing e

22、lectrophotographic or other means 2 anilox cell engraved, etched, ablated or otherwise created recession in the anilox roller to contain the ink to be transferred to the printing forme 3 anilox roller cylinder with evenly distributed cells generally mounted on a flexographic printing press to transf

23、er a controlled quantity of ink to the printing forme 4 anti-setoff powder anti-setoff spray powder particles sprayed onto a printed surface to prevent ink set-off 5 aperture size aperture width screen printing distance between two adjacent warps or weft wires (strands, threads) measured in the proj

24、ected fabric level 6 back printing reverse printing printing on the underside of a transparent film so that a readable image is visible on the top side BS ISO 12637-3:2009ISO 12637-3:2009(E) 2 ISO 2009 All rights reserved7 back-up cylinder roll which holds down the small diameter impression cylinder

25、 to prevent bending 8 bearer hardened steel ring mounted on both sides of the impression, blanket and plate cylinders which is the true pitch circle diameter of the gear cylinders 9 bias roller transfer support for the rubber blanket that acts as the intermediate carrier of the original images from

26、the forme to the substrate 10 blanket offset printing elastomeric image carrier that transfers original images from the printing forme to the substrate in offset printing 11 blanket cylinder rolling rubber blanket in contact with the plate cylinder of an offset press which transfers the inked image

27、to the substrate carried by the impression cylinder 12 blanket-to-blanket web offset printing process in which sets of plate and blanket cylinders simultaneously print on both sides of the substrate with each blanket cylinder acting as the impression cylinder for the other 13 bleeding ink penetratio

28、n or migration of substances from the ink film into or onto a substrate, during or after printing, causing an overlap of colours 14 blocking condition that occurs when layers of printed substrates stick together 15 capsule toner electrophotography colorant carrier, designed for low temperature melti

29、ng that is formed by a low melting, point resin with a hard shell 16 carrier electrophotography magnetic beads transporting toner particles to the photoconductor used in a multi-component dry electrophotographic developer BS ISO 12637-3:2009ISO 12637-3:2009(E) ISO 2009 All rights reserved 317 channe

30、l gravure printing area that links two adjacent cells in electromechanical engraving of pyramid-shaped cells in circumferential direction 18 charge transfer electrophotography process in which colorant particles are conveyed from the photoconductor to a substrate by corona treatment 19 charging roll

31、er charge roller electrophotography roller that applies a static charge to the photoconductor prior to imaging 20 clogging flexo printing filling of the anilox cells with dried ink remains 21 clogging ink jet printing blockage of printer head 22 coating thickness screen printing difference between t

32、he screen-printing stencil thickness and thickness of mesh 23 conductive brush charging electrophotography process that uses electroconductive fibres tied together in brush form, the ends of which are then brought into contact with a photosensitive surface and charged with DC voltage 24 corona trans

33、fer electrophotography process of electrostatic charging of photoconductors and substrates by passing them under a thin, high voltage wire 25 crawling insufficient wetting of the print substrate by the printing ink 26 creep tendency of a printed image to drift out of register or position BS ISO 1263

34、7-3:2009ISO 12637-3:2009(E) 4 ISO 2009 All rights reserved27 cylinder press printing press with a moving flat bed that holds the forme while a fixed rotating impression cylinder provides the pressure 28 dampening system device that wets the printing forme prior to the inking rollers 29 deflection el

35、ectrode continuous ink jet printing electrode that determines the trajectory direction of charged ink droplets 30 direct stencil screen printing stencil produced on the screen-printing carrier 31 direct-indirect stencil screen printing stencil with which the direct and the indirect production method

36、s are combined 32 doctor blade blade that wipes the excess (surface) ink from a gravure cylinder or anilox roller before printing or the excess coating from a cylinder during finishing operations 33 doctor roll fountain roll in a flexographic press 34 dot area percentage of the surface which appears

37、 to be covered by a single colour 35 double sheet detector device on a sheet-fed press that can be set to automatically stop the feeding action when the sheet separation unit of a feeder picks up two or more sheets simultaneously 36 dry back change in colour, gloss or density of an ink film as it dr

38、ies and penetrates the substrate 37 dryer tunnel compartment through which the substrate passes for final drying after printing BS ISO 12637-3:2009ISO 12637-3:2009(E) ISO 2009 All rights reserved 538 dye ink ink containing a colorant in dissolved form 39 effective squeegee angle screen printing angl

39、e between the blade and the forme when pressure has been applied 40 feathering spreading of particles from the ink film onto the substrate, creating an irregular larger image 41 fill in plugging undesired effect in which small non-image areas are filled by ink 42 flooding flow coating flood coating

40、flood pulling screen printing filling the openings of the screen-printing forme with printing ink before the printing process 43 flooding flow coating flood coating flood pulling gravure printing condition where the ink volume is so great that the image of the individual cells is no longer visible 4

41、4 flooding flow coating flood coating flood pulling offset printing used in lithography excess water on the printing plate or in the ink caused by improper ink and/or water balance 45 forme roller ink or dampening roller that directly contacts the printing forme 46 fountain solution dampening soluti

42、on mixture of water and chemical agents used to wet the lithographic forme BS ISO 12637-3:2009ISO 12637-3:2009(E) 6 ISO 2009 All rights reserved47 frame height screen-printing distance of the frame above the substrate for the correct screen release 48 gear mark irregular density that appears at regu

43、lar intervals as bands in half-tones and solids parallel to the gripper margin of the sheet 49 ghost image undesirable, faint printed images appearing on substrates where they are not intended to be reproduced 50 grain plate roughened or irregular surface of a printing plate 51 gravure cell engraved

44、, etched, ablated or otherwise created recession in the gravure cylinder to contain the ink to be transferred to the substrate 52 gravure cylinder printing forme with an engraved pattern used in the gravure process, directly resulting in the printing image after inking in a gravure press 53 half-ton

45、e gravure printing process in which the ink-receptive cylinder cells are produced to vary in surface area and depth 54 halo irregular outline that appears around printed characters and/or images, especially in relief forme printing, flexo and letter press printing 55 hickey imperfection on a printed

46、 sheet caused by unwanted particles that cling to the image carriers during lithographic or letterpress printing 56 image area part of the printing area on which ink is laid down BS ISO 12637-3:2009ISO 12637-3:2009(E) ISO 2009 All rights reserved 757 impression bar small diameter rod or bar supporte

47、d by another part of sufficient rigidity used in place of the impression cylinder for running delicate substrates 58 impression cylinder device which presses the substrate against an inked image carrier transferring the original image to the substrate 59 indirect stencil screen printing stencil that

48、, after its production, is attached to the screen-printing stencil carrier 60 ink-absorbing layer coating layer on a substrate to provide a quality image without irregular bleeding 61 ink consumption screen printing wet volume of a certain printing ink required for printing with a certain printing f

49、orme 62 ink-ejecting heater tiny heater plate located in the pressure chamber of the thermal ink jet printer head 63 ink fountain pan on a printing press that holds the ink supply to be transferred to the inking system 64 ink rest area on the upper surface of the screen-printing forme outside the printing area 65 ink trail screen printing area on the surface of the screen-printing forme outside the printing area 66 ink transfer amount of ink supplied to a substrate as ex