BS EN ISP 10609-6-1993 Information technology International standardized profiles TB TC TD and TE Connection-mode transport service over connection-mode network service Definition .pdf

《BS EN ISP 10609-6-1993 Information technology International standardized profiles TB TC TD and TE Connection-mode transport service over connection-mode network service Definition .pdf》由会员分享，可在线阅读，更多相关《BS EN ISP 10609-6-1993 Information technology International standardized profiles TB TC TD and TE Connection-mode transport service over connection-mode network service Definition .pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BSENISP 10609-6:1997 BSISO/IEC ISP 10609-6:1992 renumbered, Incorporating Amendment No.1 Information technology International Standardized Profiles TB, TC, TD and TE Connection-mode Transport Service over connection-mode Network Service Part 6: Definition of profiles TC1111/TC1121 T

2、he European Standard ENISP10609-6:1996 has the status of a British Standard ICS 35.100.05BSENISP10609-6:1997 This British Standard, having been prepared under the directionof the Information Systems Technology Standards Policy Committee, was publishedunder the authority ofthe Standards Board and com

3、es into effect on 15 January1993 BSI08-1999 The following BSI references relate to the work on this standard: Committee reference IST/6 Draft for committee90/66799 DC ISBN 0 580 21588 1 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Inf

4、ormation Systems Technology Standards Policy Committee (IST/-) to Technical Committee IST/6, upon which the following bodies were represented: British Computer Society British Telecommunications plc Digital Equipment Co. Ltd. HM Treasury (Central Computer and Telecommunications Agency) IBM United Ki

5、ngdom (UK) Ltd. Information Systems Committee of the Universities Funding Council International Computers Limited Logica UK Ltd. Ministry of Defence Rank Xerox (UK) Ltd. Swift Project Consortium Amendments issued since publication Amd. No. Date Comments 9473 May 1997 Indicated by a sideline in the m

6、arginBSENISP10609-6:1997 BSI 08-1999 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Foreword iii Text of ISO/IEC ISP10609-6 1BSENISP10609-6:1997 ii BSI 08-1999 National foreword This British Standard has been prepared by Technical Committee IST/6and is the

7、English language version of ENISP10609 Information technology International Standardized Profiles TB, TC, TD and TE Connection-mode Transport Service over connection-mode Network Service Part6:1996 Definition of profiles TC1111/TC1121 published by the European Committee for Standardization (CEN). It

8、 is identical with ISO/IECISP10609-6:1992published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). This British Standard is published under the direction of the DISC Board whose Technical Committee IST/6has the responsibility to: a

9、id enquirers to understand the text; present to the responsible international/European committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and Euro

10、pean Standards, as well as overseas standards, are available from Customer Services, BSI,389Chiswick High Road, London W44AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Complianc

11、e with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theENISP title page, page2, the ISO/IEC ISPtitle page, pages ii to iv, pages1and2and a back cover. This standard has been

12、updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISP10609-6 January1996 ICS35.100 Supersedes ENV41104:1987 Descriptors: Circuit networks, data processing

13、, data transfer, definition, information exchange, information interchange, open systems, standard description English version Information technology International Standardized Profiles TB, TC, TD and TE Connection-mode Transport Service over connection-mode Network Service Part6: Definition of prof

14、iles TC1111/TC1121 (ISO/IEC ISP10609-6:1992) Technologie de linformation Profils normaliss internationaux TB, TC, TD et TE Service de transport en mode connexion sur service de rseau en mode connexion Partie6: Dfinition des profils TC1111/TC1121 (ISO/IEC ISP10609-6:1992) Informationstechnik Internat

15、ionale Profilnorm TB, TC, TD und TE Verbindungsorientierter Transportdienst ber verbindungsorientiertem Vermittlungsdienst Teil6: Definition der Profile TC1111/TC1121 (ISO/IEC ISP10609-6:1992) This European Standard was approved by CEN on1995-10-04. CEN members are bound to comply with the CEN/CENEL

16、EC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CE

17、N member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN m

18、embers are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europi

19、sches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members Ref. No. EN ISP10609-6:1996EENISP10609-6:1996 BSI 08-1999 2 Foreword The text of the Intern

20、ational Standard from ISO/IEC/JTC1, Information Technology, of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) has been taken over as a European Standard by CEN Technical Board. This European Standard shall be given the status of a nat

21、ional standard, either by publication of an identical text or by endorsement, at the latest by July1996, and conflicting national standards shall be withdrawn at the latest by July1996. According to CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standa

22、rd: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. NOTEEN ISP10609-2, EN ISP10609-3, EN ISP10609-6, ENISP10609-7and EN ISP10609-9replace ENV41104:1987which shall be wi

23、thdrawn. For the time being, this document exists in the English version only.ISO/IECISP10609-6:1992(E) ii BSI 08-1999 Contents Page Foreword iii Introduction 1 1 Scope 1 2 Normative references 2 3 Definitions 2 4 Abbreviations 2 5 Profiles TC1111/TC1121 2 Figure 1 Scenario of Applicability of the T

24、C1111/TC1121 Profiles 1 Table 1 TC1111 Profile protocol stack for end system 2 Table 2 TC1121 Profile protocol stack for end system 2ISO/IECISP10609-6:1992(E) BSI 08-1999 iii Foreword ISO (the International Organization for Standardization) and IEC (theInternational Electrotechnical Commission) form

25、 the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC te

26、chnical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC1.

27、In addition to developing International Standards, ISO/IEC JTC1 has created a Special Group on Functional Standardization for the elaboration of International Standardized Profiles. An International Standardized Profile is an internationally agreed, harmonized document which identifies a standard or

28、 group of standards, together with options and parameters, necessary to accomplish a function or set of functions. Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an International Standardized Profile requires approval by at least75%of the natio

29、nal bodies casting a vote. International Standardized Profile ISO/IEC ISP10609-6was prepared with the collaboration of OSI Asia-Oceania Workshop (AOW); European Workshop for Open Systems (EWOS); OSI Implementors Workshop (OIW). ISO/IEC ISP10609consists of the following parts, under the general title

30、 Information technology International Standardized Profiles TB, TC, TD and TE Connection-mode Transport Service over connection-mode Network Service: Part1: Subnetwork-type independent requirements for Group TB; Part2: Subnetwork-type independent requirements for Group TC; Part3: Subnetwork-type ind

31、ependent requirements for Group TD; Part4: Subnetwork-type independent requirements for Group TE; Part5: Definition of profiles TB1111/TB1121; Part6: Definition of profiles TC1111/TC1121; Part7: Definition of profiles TD1111/TD1121; Part8: Definition of profiles TE1111/TE1121; Part9: Subnetwork-type

32、 dependent requirements for Network Layer, Data Link Layer and Physical Layer concerning permanent access to a packet switched data network using virtual calls.iv blankISO/IECISP10609-6:1992(E) BSI 08-1999 1 Introduction This part of ISO/IEC ISP10609 (International Standardized Profile) is defined w

33、ithin the context of Functional Standardization, in accordance with the principles specified by ISO/IEC TR10000-1:1990. The context of Functional Standardization is one part of the overall field of Information Technology (IT) standardization activities, covering base standards, profiles, and registr

34、ation mechanisms. A profile defines a combination of base standards that collectively perform a specific well-defined IT function. Profiles standardize the use of options and other variations in the base International Standards, and provide a basis for the development of uniform, internationally rec

35、ognized system tests. One of the most important roles for an ISP is to serve as the basis for the development (by organizations other than ISO and IEC) of internationally recognized tests and test centres. ISPs are produced not simply to “legitimate” a particular choice of base standards and options

36、, but to promote real system interoperability. The development and widespread acceptance of tests based on this and other ISPs is crucial to the successful realization of this goal. ISO/IEC ISP10609consists of several parts, of which this is part6. ISO/IEC ISP10609-1, ISO/IEC10609-2, ISO/IEC10609-3a

37、nd ISO/IEC ISP10609-4specify subnetwork-type independent requirements for Group TB, TC, TD and TE profiles, respectively. ISO/IEC ISP10609-5, ISO/IEC10609-6, ISO/IEC10609-7and ISO/IEC ISP10609-8define TB1111/TB1121, TC1111/TB1121, TD1111/TD1121 and TE1111/TE1121, respectively. ISO/IECISP10609-9speci

38、fies subnetwork-type dependent requirements concerning permanent access to packet switched data network using virtual calls. 1 Scope 1.1 General This part of ISO/IEC ISP10609 is applicable to end systems concerned with operating in the Open Systems Interconnection(OSI) environment. It specifies a co

39、mbination of OSI standards, which collectively provide the connection-mode Transport Service using the connection-mode Network Service. This part of ISO/IEC ISP10609is applicable to the provision of the connection-mode Transport Service in end systems attached to any type of subnetwork from which th

40、e standardized connection-mode Network Service can be made available. This part of ISO/IEC ISP10609specifies the definition of Profiles TC1111/TC1121. The TC1111/TC1121are profiles in the TC group which uses Transport protocol classes0and2. 1.2 Position of Profile within the Taxonomy ISO/IEC ISP1060

41、9covers the taxonomy elements identified as “TB, TC, TD and TE” in the “Directory of Profiles and ISPs” contained in ISO/IEC TR10000-2. This part of ISO/IEC ISP10609specifies the definition of Profile TC1111/TC1121. These profiles may be combined with any A-profile at the A/T boundary. 1.3 Scenario

42、Figure 1 illustrates the end system configurations to which TC1111/TC1112 profiles are applicable. This part of ISO/IEC ISP10609specifies the required functions from the supporting protocol stack shown in Table 1 and Table 2. Figure 1 Scenario of Applicability of the TC1111/TC1121ProfilesISO/IECISP1

43、0609-6:1992(E) 2 BSI 08-1999 Table 1 TC1111Profile protocol stack for end system Table 2 TC1121Profile protocol stack for end system This part of ISO/IEC ISP10609does not specify the required functions for relays. 2 Normative references The following documents contain provisions which, through refer

44、ence in this text, constitute provisions of this part of ISO/IEC ISP. At the time of publication, the editions indicated were valid. All documents are subject to revision, and parties to agreements based on this International Standardized Profile are warned against automatically applying any more re

45、cent editions of the documents listed below, since the nature of references made by ISPs to such documents, is that they may be specific to a particular edition. Members of IEC and ISO maintain registers of currently valid International Standards and ISPs, and CCITT maintains published editions of i

46、ts current Recommendations. ISO/IEC ISP10609-1:1992, Information technology International Standardized Profile TB, TC, TD and TE Connection-mode Transport Service over Connection-mode Network Service Part1: Subnetwork-type independent requirements for Group TB. ISO/IEC ISP10609-2:1992, Information t

47、echnology International Standardized Profile TB, TC, TD and TE Connection-mode Transport Service over Connection-mode Network Service Part2: Subnetwork-type independent requirements for Group TC. ISO/IEC ISP10609-9:1992, Information technology International Standardized Profile TB, TC, TD and TE Con

48、nection-mode Transport Service over Connection-mode Network Service Part9: Subnetwork-type dependent requirements for Network Layer, Data Link Layer and Physical Layer concerning permanent access to a packet switched data network using virtual calls. 3 Definitions All of the terms used in this part

49、of ISO/IECISP10609are defined in the referenced base standards(see clause2). 4 Abbreviations All of the abbreviations and acronyms used in this part of ISO/IEC ISP10609 are defined in the referenced base standards(see clause2). 5 Profiles TC1111/TC1121 5.1 Subnetwork-type independent requirements Subnetwork-type independent requirements for Transport Layer are specified in ISO/IEC ISP10609-2. 5.2 Subnetwork-type dependent requirements Subnetwork-type dependent requirements for N