BS EN ISP 10609-3-1993 Information technology - International standardized profiles TB TC TD and TE - Connection-mode transport service over connection-mode network service - Subne《.pdf

《BS EN ISP 10609-3-1993 Information technology - International standardized profiles TB TC TD and TE - Connection-mode transport service over connection-mode network service - Subne《.pdf》由会员分享，可在线阅读，更多相关《BS EN ISP 10609-3-1993 Information technology - International standardized profiles TB TC TD and TE - Connection-mode transport service over connection-mode network service - Subne《.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISP 10609-3:1997 BS ISO/IEC ISP 10609-3:1992 renumbered, incorporating amendment No.1 Information technology International Standardized Profiles TB, TC, TD and TE Connection-mode Transport Service over connection-mode Network Service Part 3: Subnetwork-type independent require

2、ments for Group TD The European Standard EN ISP 10609-3:1996 has the status of a British Standard ICS 35.100.05 UDC 831.3:621.39BSENISP10609-3:1997 This British Standard, having been prepared under the directionof the Information Systems Technology Standards Policy Committee, was publishedunderthe a

3、uthority ofthe Standards Board and comesintoeffect on 15January1993 BSI 12-1999 The following BSI references relate to the work on this standard: Committee reference IST/6 Draft for comment 90/66810 DC ISBN 0 580 21585 7 Committees responsible for this British Standard The preparation of this Britis

4、h Standard was entrusted by the Information Technology Systems Standards Policy Committee (IST/-) to Technical Committee IST/6, upon which the following bodies were represented: British Computer Society British Telecommunications plc Digital Equipment Co. Ltd. HM Treasury (Central Computer and Telec

5、ommunications Agency) IBM United Kingdom Ltd. Information Systems Committee of the Universities Funding Council International Computers Limited Logica UK Ltd. Ministry of Defence Rank Xerox (UK) Ltd. Swift Project Consortium Amendments issued since publication Amd. No. Date Comments 9471 May 1997 In

6、dicated by a sideline in the marginBSENISP10609-3:1997 BSI 12-1999 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Foreword iii Text of ISO/IEC ISP 10609-3 1BSENISP10609-3:1997 ii BSI 12-1999 National foreword This British Standard has been prepared by Techn

7、ical Committee IST/6 and is the English language version of EN ISP 10609 Information technology International Standardized Profiles TB, TC, TD and TE Connection-mode Transport Service over connection-mode Network Service Part 3:1996 Subnetwork-type independent requirements for Group TD published by

8、the European Committee for Standardization (CEN). It is identical with ISO/IEC ISP 10609-3:1992 published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). This British Standard is published under the direction of the DISC Board whos

9、e Technical Committee IST/6 has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promul

10、gate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, BSI, 389 Chiswick High Road, London W4 4AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are re

11、sponsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN ISP title page, page 2, the ISO/IEC ISP title page, pages ii to

12、iv, pages1to5 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISP 10609-3 January 1996 ICS 35.100 SupersedesENV

13、41101:1987 Descriptors: Circuit networks, data processing, data transfer, information exchange, information interchange, open systems, standard description English version Information technology International Standardized Profiles TB, TC, TD and TE Connection-mode Transport Service over connection-m

14、ode Network Service Part 3: Subnetwork-type independent requirements for Group TD (ISO/IEC ISP 10609-3:1992) Technologie de linformation Profils normaliss internationaux TB, TC TD et TE Service de transport en mode connexion sur service de rseau en mode connexion Partie3: Spcifications indpendantes

15、du type de sous-rseau pour groupe TD (ISO/IEC ISP 10609-3:1992) Informationstechnik Internationale Profilnormen TB, TC, TD und TE Verbindungsorientierter Transportdienst berverbindungsorientiertem Vermittlungsdienst Teil 3: Teilnetztyp-unabhngige Anforderungen fr Gruppe (ISO/IEC ISP 10609-3:1992) Th

16、is European Standard was approved by CEN on1995-10-04. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

17、concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its

18、 own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzer

19、land and UnitedKingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN an

20、d its members Ref. No. EN ISP 10609-3:1996 EENISP10609-3:1996 BSI 12-1999 2 Foreword The text of the International Standard from ISO/IEC JTC 1, Information Technology, of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) has been taken o

21、ver as a European Standard by CEN Technical Board. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 1996, and conflicting national standards shall be withdrawn at the latest by July 1996. Acco

22、rding to CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the UnitedKingdom. NOTEEN

23、ISP 10609-2, EN ISP 10609-3, EN ISP 10609-6, ENISP 10609-7 and EN ISP 10609-9 replace ENV 41104:1987 which shall be withdrawn. For the time being, this document exists in the English version only.ISO/IECISP10609-3:1992(E) ii BSI 12-1999 Contents Page Foreword iii Introduction 1 1 Scope 1 2 Normative

24、 references 1 3 Definitions 2 4 Abbreviations 2 5 Subnetwork-type Independent Requirement 2 Annex A (normative) International Standardized Profile Implementation Conformance Statement Requirements List (IPRL) 4 Introduction 4 A.1 Notation 4 A.2 TD Dependent Transport Layer IPRL 4 Annex B (normative)

25、 List of Defect Reports 5 Figure 1 Handling of called and calling TSAP-ID parameters 3ISO/IECISP10609-3:1992(E) BSI 12-1999 iii Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standard

26、ization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mu

27、tual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. In addition to developing International Stand

28、ards, ISO/IEC JTC 1 has created a Special Group on Functional Standardization for the elaboration of International Standardized Profiles. An International Standardized Profile is an internationally agreed, harmonized document which identifies a standard or group of standards, together with options a

29、nd parameters, necessary to accomplish a function or set of functions. Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an International Standardized Profile requires approval by at least75% of the national bodies casting a vote. International St

30、andardized Profile ISO/IEC ISP 10609-3 was prepared with the collaboration of OSI Asia-Oceania Workshop (AOW); European Workshop for Open Systems (EWOS); OSI Implementors Workshop (OIW). ISO/IEC ISP 10609 consists of the following parts, under the general title Information technology International S

31、tandardized Profiles TB, TC, TD and TE Connection-mode Transport Service over connection-mode Network Service: Part 1: Subnetwork-type independent requirements for Group TB; Part 2: Subnetwork-type independent requirements for Group TC; Part 3: Subnetwork-type independent requirements for Group TD;

32、Part 4: Subnetwork-type independent requirements for Group TE; Part 5: Definition of profiles TB1111/TB1121; Part 6: Definition of profiles TC1111/TC1121; Part 7: Definition of profiles TD1111/TD1121; Part 8: Definition of profiles TE1111/TE1121; Part 9: Subnetwork-type dependent requirements for Ne

33、twork Layer, Data Link Layer and Physical Layer concerning permanent access to a packet switched data network using virtual calls. Annex A and Annex B form an integral part of this part of ISO/IEC ISP10609.iv blankISO/IECISP10609-3:1992(E) BSI 12-1999 1 Introduction This part of ISO/IEC ISP 10609 (I

34、nternational Standardized Profile) is defined within the contextof Functional Standardization, in accordance with the principles specified by ISO/IEC TR10000-1:1990. The context of Functional Standardization is one part of the overall field of Information Technology (IT) standardization activities,

35、covering base standards, profiles, and registration mechanisms. A profile defines a combination of base standards that collectively perform a specific well-defined IT function. Profiles standardize the use of options and other variations in the base International Standards, and provide a basis for t

36、he development of uniform, internationally recognized system tests. One of the most important roles for an ISP is to serve as the basis for the development (by organizations other than ISO and IEC) of internationally recognized tests and test centres. ISPs are produced not simply to “legitimate” a p

37、articular choice of base standards and options, but to promote real system interoperability. The development and widespread acceptance of tests based on this and other ISPs is crucial to the successful realization of this goal. ISO/IEC ISP10609 consists of several parts, of which this is part 3. ISO

38、/IEC ISP 10609-1, ISO/IEC 10609-2, ISO/IEC 10609-3 and ISO/IEC ISP 10609-4 specify subnetwork-type independent requirements for Group TB, TC, TD and TE profiles, respectively. ISO/IEC ISP 10609-5, ISO/IEC 10609-6, ISO/IEC 10609-7 and ISO/IEC ISP 10609-8 define TB1111/TB1121, TC1111/TB1121, TD1111/TD

39、1121 and TE1111/TE1121, respectively. ISO/IEC ISP 10609-9 specifies subnetwork-type dependent requirements concerning permanent access to packet switched data network using virtual calls. 1 Scope This part of ISO/IEC ISP10609 is applicable to end systems concerned with operating in the Open Systems

40、Interconnection(OSI) environment. It specifies a combination of OSI standards, which collectively provide the connection-mode Transport Service using the connection-mode Network Service. This part of ISO/IEC ISP 10609 is applicable to the provision of the connection-mode Transport Service in end sys

41、tems attached to any type of subnetwork from which the standardized connection-mode Network Service can be made available. Profiles of the Connection-mode Transport Service over Connection-mode Network Service are grouped according to their required support of transport protocol class(es). Group TB:

42、 Includes transport protocol classes0,2, and 4 Group TC: Includes transport protocol classes0and 2 Group TD: Includes transport protocol class 0 Group TE: Includes transport protocol class 2 This part of ISO/IEC ISP 10609specifies the subnetwork-type independent requirements for Group TD. 2 Normativ

43、e references The following documents contain provisions which, through reference in this text, constitute provisions of this part of ISO/IEC ISP10609. At the time of publication, the editions indicated were valid. Alldocuments are subject to revision, and partiestoagreements based on this part of IS

44、O/IEC ISP10609 are warned against automatically applying any more recent editions of the documents listed below, since the nature of references made by ISPs to such documents, is that they may be specific to a particular edition. Members of IEC and ISO maintain registers of currently valid Internati

45、onal Standards and ISPs, and CCITT maintains published editions of its current Recommendations. ISO 8072:1986, Information processing systems Open Systems Interconnection Transport servicedefinition. (See also CCITT Recommendation X.214-1988) ISO/IEC 8073:1988, Information processing systems Open Sy

46、stems Interconnection Connection oriented transport protocol specification. (Seealso CCITT Recommendation X.224-1988) ISO/IEC 8073/Add.1:1988, Information processing systems Open Systems Interconnection Connection oriented transport protocol specification Addendum 1: Network connection management su

47、bprotocol. (See also CCITT Recommendation X.224-1988) ISO/IEC 8073/Amd.3:1992, Information processing system Open Systems Interconnection Connectionoriented transport protocol specification Amendment 3: Protocol implementation conformance statement (PICS) proforma. ISO/IEC 8073/Cor.1:1990, Informati

48、on processing systems Open Systems Interconnection Connection oriented transport protocol specification Technical corrigendum 1. ISO/IECISP10609-3:1992(E) 2 BSI 12-1999 ISO/IEC 8073/Cor.2:1990, Information processing systems Open Systems Interconnection Connection oriented transport protocol specifi

49、cation Technical corrigendum 2. ISO/IEC 8073/Cor.5:1991, Information processing systems Open Systems Interconnection Connection oriented transport protocol specification Technical corrigendum 5. ISO 8348:1987, Information processing systems Data communications Network service definition. (See also CCITT Recommendation X.213-1988) ISO/IEC ISP 10609-1:1992, Information technology International Standardized Profile TB, TC, TD and TE Connection-mode Transport ser