BS EN ISP 10609-14-1995 Information technology International standardized profiles TB TC TD and TE Connection-mode transport service over connection-mode network service Definition-.pdf

《BS EN ISP 10609-14-1995 Information technology International standardized profiles TB TC TD and TE Connection-mode transport service over connection-mode network service Definition-.pdf》由会员分享，可在线阅读，更多相关《BS EN ISP 10609-14-1995 Information technology International standardized profiles TB TC TD and TE Connection-mode transport service over connection-mode network service Definition-.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISP 10609-14:1997 Incorporating Amendment No. 1 to BS ISO/IEC ISP 10609-14:1994 (renumbers BS as BSEN ISP 10609-14: 1997) Information technology International Standardized Profiles TB, TC, TD and TE Connection-mode Transport Service over connection-mode Network Service Part 14

2、: Definition of profile TC53, provision of the OSI connection-mode Transport Service using the OSI connection-mode Network Service in an End System attached to a Token Ring LAN The European Standard EN ISP 10609-14:1996 has the status of a British Standard ICS 35.100.05BSENISP10609-14:1997 This Brit

3、ish Standard, having been prepared under the direction of the Information Systems Technology Assembly, was published under the authority of the Standards Board and comes into effect on 15 July 1995 BSI 08-1999 The following BSI references relate to the work on this standard: Committee reference IST/

4、6 Draft for comment 92/68843 DC ISBN 0 580 24342 7 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee IST/6, Data communications, upon which the following bodies were represented: British Computer Society British Telecommuni

5、cations plc CCTA (the Government Centre for Information Systems) Digital Equipment Co. Ltd. IBM United Kingdom Ltd. Institution of Electrical Engineers International Computers Limited Logica UK Ltd. Nine Tiles Computer Systems Ltd. Rank Xerox (UK) Ltd. Amendments issued since publication Amd. No. Da

6、te Comments 9581 May 1997 Indicated by a sideline in the marginBSENISP10609-14:1997 BSI 08-1999 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Foreword iii Text of ISO/IEC ISP 10609-14 1BSENISP10609-14:1997 ii BSI 08-1999 National foreword This British Stan

7、dard has been prepared by Technical Committee IST/6 and is the English language version of EN ISP10609-14 Information technology International Standardized Profiles TB, TC, TD and TE Connection-mode Transport Service over connection-mode Network Service Part14: Definition of profile TC53, provision

8、of the OSI connection-mode Transport Service using the OSI connection-mode Network Service in an End System attached to a Token Ring LAN published by the European Committee for Standardization (CEN). It is identical with ISO/IEC ISP10609-14:1994 published by the International Organization for Standa

9、rdization (ISO) and the International Electrotechnical Commission (IEC). It supersedes DD ENV41103-5:1993 which is withdrawn. This British Standard is published under the direction of the Information Systems Technology Assembly whose Technical Committee IST/6 has the responsibility to: aid enquirers

10、 to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and European Standards, as we

11、ll as overseas standards, are available from Customer Services, BSI, 389 Chiswick High Road, London W4 4AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British S

12、tandard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN ISPtitle page, page 2, the ISO/IECISP title page, pages ii to iv, pages1to3 and abackcover. This standard has been updated (see copy

13、right date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISP 10609-14 January 1996 ICS 35.100 Supersedes ENV 41103-5:1992 Descriptors: Data processing, information interchange, n

14、etwork interconnection, open systems interconnection, local area networks, data transmission, connectionless mode transmission, communication procedure, control procedures, transport layer, network layer, profiles English version Information technology International Standardized Profiles TB, TC, TD

15、and TE Connection-mode Transport Service over connection-mode Network Service Part14:Definition of profile TC53, provision of the OSI connection-mode Transport Service using the OSI connection-mode Network Service in an End System attached to a Token Ring LAN (ISO/IEC ISP 10609-14:1994) Technologies

16、 de linformation Profils normaliss internationaux TB, TC, TD et TE Service de transport en mode connexion Partie14:Dfinition du profil TC53, fourniture du service de transport en mode connexion OSI utilisant le service de rseau en mode connexion OSI dans un systme final attach un RLE anneau jeton (I

17、SO/IEC ISP 10609-14:1994) This European Standard was approved by CEN on 1995-10-04. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists an

18、d bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibi

19、lity of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Por

20、tugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 All rights of reproduction and communication in any form and by any means reser

21、ved in all countries to CEN and its members Ref. No. EN ISP 10609-14:1996 EENISP10609-14:1996 BSI 08-1999 2 Foreword The text of the International Standard from ISO/IEC/JTC1, Information Technology, of the International Organization for Standardization (ISO) and the International Electrotechnical Co

22、mmission (IEC) has been taken over as a European Standard by CEN Technical Board. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July1996, and conflicting national standards shall be withdrawn at

23、 the latest by July1996. According to CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland a

24、nd the UnitedKingdom. NOTEEN ISP 10609-14 replaces ENV 41103-5:1992. For the time being, this document exists in the English version only.ISO/IECISP10609-14:1994(E) ii BSI 08-1999 Contents Page Foreword iii Introduction 1 1 Scope 1 1.1 General 1 1.2 Position within the taxonomy 1 1.3 Scenario 1 2 No

25、rmative references 2 3 Definitions 2 4 Abbreviations 2 5 Requirements 2 5.1 Transport layer 2 5.2 Network layer 2 5.3 Logical link control sublayer 2 5.4 Medium access control sublayer 2 5.5 Physical layer 2 Annex A (normative) ISPICS requirements list 3 A.1 General options of the profile 3 A.2 Stan

26、dards selected and combined in the profile 3 A.3 Constraints on base standards 3 Annex B (informative) Recommendations 3 B.1 ISO/IEC 8208 recommendations 3 B.2 ISO 8802-2 recommendations 3 B.3 ISO/IEC 8802-5 recommendations 3 Figure 1 Scenario of applicability of the TC53 profile 1 Figure 2 Profile

27、protocol stack for a TC53 End System 2ISO/IECISP10609-14:1994(E) BSI 08-1999 iii Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) together form a system for worldwide standardization as a whole. National bodies that are members

28、 of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organi

29、zations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC1. In addition to developing International Standards, ISO/IEC JTC1 has created a Special G

30、roup on Functional Standardization (ISO/IEC JTC1/SGFS) for the processing of International Standardized Profiles. An International Standardized Profile is an internationally agreed, harmonized document which identifies a standard or group of standards, together with options and parameters, necessary

31、 to accomplish a function or set of functions. Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an International Standardized Profile requires approval by at least75% of the national bodies casting a vote. S-liaison may be established with JTC 1/

32、SGFS by specialized organizations involved in the work of functional standardization. This part of ISO/IEC ISP10609 was prepared with the collaboration of the following S-liaisons: Asia-Oceania Workshop (AOW); European Workshop for Open Systems (EWOS); Open Systems Environment Implementors Workshop

33、(OIW). ISO/IEC ISP 10609 consists of several parts, under the general title Information technology International Standardized Profiles TB, TC, TD and TE Connection-mode Transport Service over connection-mode Network Service: Part 1: Subnetwork-type independent requirements for Group TB; Part 2: Subn

34、etwork-type independent requirements for Group TC; Part 3: Subnetwork-type independent requirements for Group TD; Part 4: Subnetwork-type independent requirements for Group TE; Part 5: Definition of profiles TB1111/TB1121; Part 6: Definition of profiles TC1111/TC1121; Part 7: Definition of profiles

35、TD1111/TD1121; Part 8: Definition of profiles TE1111/TE1121; Part 9: Subnetwork-type dependent requirements for Network Layer, Data Link Layer and Physical Layer concerning permanent access to a packet switched data network using virtual calls; Part 10: LAN subnetwork-dependent, media-independent re

36、quirements; Part 11: CSMA/CD LAN subnetwork-dependent, media-dependent requirements; Part 12: Definition of profile TC51, provision of the OSI connection-mode Transport Service using the OSI connection-mode Network Service in an End System attached to a CSMA/CD LAN; Part 14: Definition of profile TC

37、53, provision of the OSI connection-mode Transport Service using the OSI connection-mode Network Service in an End System attached to a Token Ring LAN. This part of ISO/IEC ISP 10609 contains two annexes. Annex A is normative, Annex B is informative.iv blankISO/IECISP10609-14:1994(E) BSI 08-1999 1 I

38、ntroduction This International Standardized Profile (ISP) is defined in accordance with the principles specified by ISO/IEC Technical Report10000, “Information technology Framework and taxonomy of International Standardized Profiles”. The context of Functional Standardization is one area in the over

39、all field of Information Technology (IT) standardization activities, covering base standards, profiles, and registration mechanisms. A profile defines a combination of base standards that collectively perform a specific well-defined IT function. Profiles standardize the use of options and other vari

40、ations in the base standards, and provide a base for the development of uniform, internationally recognized system tests. ISPs are produced not simply to “legitimize” a particular choice of base standards and options, but to promote real system interoperability. One of the most important roles for a

41、n ISP is to serve as the basis for the development (by organizations other than ISO and IEC) of internationally recognized test methods. The development and widespread acceptance of tests based on this and other ISPs is crucial to the successful realization of this goal. ISO/IEC ISP 10609 consists o

42、f several parts, of which this is part14. Parts1 to4 of ISO/IEC ISP10609 specify profile requirements that are subnetwork-independent, for each of the transport groups TB, TC, TD and TE, respectively. There are further parts which specify subnetwork-dependent and media-dependent requirements. In add

43、ition, for each individual profile there is a part of ISO/IEC ISP10609 which identifies the specific requirements of that profile, making reference to appropriate material from the relevant subnetwork-independent and subnetwork-dependent parts. This part identifies the specific requirements for prof

44、ile TC53. 1 Scope 1.1 General This International Standardized Profile is applicable to End Systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI standards, which collectively provide the connection-mode Transport Service using the c

45、onnection-mode Network Service. This part of ISO/IEC ISP 10609 defines the TC53 profile which is applicable to the provision of the OSI connection-mode Transport Service using the OSI connection-mode Network Service in an End System attached to a Token Ring LAN subnetwork. 1.2 Position within the ta

46、xonomy The taxonomy of profiles is defined in ISO/IEC TR10000-2. This part of ISO/IEC ISP10609 defines the profile: 1.3 Scenario Figure 1 illustrates the configurations of systems to which the TC53 profile is applicable. TC53 Connection-mode Transport Service over connection-mode Network Service ove

47、r Token Ring LAN subnetworks Figure 1 Scenario of applicability of the TC53 profileISO/IECISP10609-14:1994(E) 2 BSI 08-1999 The TC53 profile specifies the required functions from the supporting protocol stack shown inFigure 2 below. This profile does not specify the required functions for relays. 2

48、Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this part of ISO/IEC ISP10609. At the time of publication, the editions indicated were valid. All documents are subject to revision, and parties to agreements based on this

49、 part of ISO/IEC ISP10609 are warned against automatically applying any more recent editions of the documents listed below, since the nature of references made by ISPs to such documents is that they may be specific to a particular edition. Members of IEC and ISO maintain registers of currently valid International Standards and ISPs, and ITU-T maintains published editions of its current Recommendations. ISO/IEC TR 10000-1:1992, Information technology Framework and taxonomy of Internationa