BS EN ISP 10607-6-1997 Information technology International standardized profiles AFTnn File transfer access and management AFT3 File management service《信息技术 国际标准化配置文件AFTnn 文件转接 存取.pdf

《BS EN ISP 10607-6-1997 Information technology International standardized profiles AFTnn File transfer access and management AFT3 File management service《信息技术 国际标准化配置文件AFTnn 文件转接 存取.pdf》由会员分享，可在线阅读，更多相关《BS EN ISP 10607-6-1997 Information technology International standardized profiles AFTnn File transfer access and management AFT3 File management service《信息技术 国际标准化配置文件AFTnn 文件转接 存取.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISP 10607-6:1997 Information technology International Standardized Profiles AFTnn File Transfer, Access and Management Part 6: AFT3 File Management Service (ISO/IEC ISP 10607-6:1995) The European Standard EN ISP 10607-6:1996 has the status of a British Standard ICS 35.100.05BS

2、ENISP10607-6:1997 This British Standard, having been prepared under the directionof the DISC Board, waspublished under the authorityof the Standards Boardand comes intoeffecton 15 April 1997 BSI 03-1999 ISBN 0 580 26532 3 National foreword This British Standard is the English language version of EN

3、ISP10607-6:1996. It is identical with ISO/IEC ISP10607-6:1995. It supersedes BS EN ISP 10607-6:1994 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/21, Open Systems Interconnection, Data Management and Open Distributed Processing, which has the re

4、sponsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK.

5、A list of organizations represented on this committee can be obtained on request. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards

6、 Correspondence Index”, or using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does

7、 not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN ISP title page, page 2, theISO/IEC ISP title page, pages ii to iv, pages1to 12 and aback cover. This standard has been updated (see copyright da

8、te) and may have had amendments incorporated. This will be indicated in the amendment table on theinside front cover. Amendments issued since publication Amd. No. Date CommentsBSENISP10607-6:1997 BSI 03-1999 i Contents Page National foreword Inside front cover Foreword 2 Text of ISO/IECISP10607-6 1i

9、i blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISP 10607-6 August 1996 ICS 35.100 Supersedes EN ISP 10607-6:1993 Descriptors: See ISO document English version Information technology International Standardized Profiles AFTnn File Transfer, Access and Management Part 6: AFT3 File Manageme

10、nt Service (ISO/IEC ISP 10607-6:1995) Technologies de linformation Profils normaliss internationaux AFTnn Transfert, accs et gestion de fichier Partie 6: AFT3 Service de gestion de fichier (ISO/IEC ISP 10607-6:1995) Informationstechnik Internationale Profilnormen AFTnn Dateibermittlung, Zugriff und

11、Verwaltung Teil 6: AFT3 Management von Dateien (ISO/IEC ISP 10607-6:1995) This European Standard was approved by CEN on 1996-08-09. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stan

12、dard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other la

13、nguage made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Irela

14、nd, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 Copyright reserved to CEN member

15、s Ref. No. EN ISP 10607-6:1996 EENISP10607-6:1996 BSI 03-1999 2 Foreword The text of the International Standard from Technical Committee ISO/IEC/JTC1 “Information Technologies” of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) has bee

16、n taken over as an European Standard by the Technical Board of CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 1997, and conflicting national standards shall be withdrawn at the late

17、st by month of February 1997. This European Standard spersedes EN ISP 10607-6:1993. For the time being this standard exists in the English version only. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Euro

18、pean Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard ISO/IEC ISP 10607-6:1991 was approved by CEN as

19、 a European Standard without any modification.ENISP10607-6:1996 ii BSI 03-1999 Contents Page Foreword iii Introduction 1 1 Scope 1 2 Normative references 2 3 Definitions 3 4 Abbreviations 3 5 Conformance 4 6 Virtual filestore 4 7 File protocol 4 Annex A (normative) Profile Requirements List for ISO/

20、IEC ISP 10607-6 (AFT3) 5 Annex B (normative) Profile object identifier 12 Annex C (informative) Corrigenda 12 Annex D (informative) Main differences between the 1st edition (1991) and the2ndedition(1995) of this part of ISO/IEC ISP 10607 12 Figure 1 File management between two end systems 2 Table 1

21、Interoperable configurations 1 Descriptors: Data processing, information interchange, network interconnection, open systems interconnection, data transmission, files, access, management, communication procedure, profiles.ENISP10607-6:1996 BSI 03-1999 iii Foreword ISO (the International Organization

22、for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective

23、organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental or non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information tech

24、nology, ISO and IEC have established a joint technical committee, ISO/IECJTC1. In addition to developing International Standards, ISO/IECJTC1 has created a Special Group on Functional Standardization for the elaboration of International Standardized Profiles. An International Standardized Profile is

25、 an internationally agreed, harmonized document which identifies a standard or group of standards, together with options and parameters, necessary to accomplish a function or set of functions. Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an I

26、nternational Standardized Profile requires approval by at least 75% of the national bodies casting a vote. International Standardized Profile ISO/IECISP10607-6 was prepared with the collaboration of Asia-Oceania Workshop (AOW); European Workshop for Open Systems (EWOS); Open Systems Environment Impl

27、ementors Workshop (OIW). ISO/IECISP10607 consists of the following parts, under the general title Information technology International Standardized Profiles AFTnn File Transfer, Access and Management: Part 1: Specification of ACSE, Presentation and Session protocols for the use by FTAM; Part 2: Defi

28、nition of document types, constraint sets and syntaxes; Part 3: AFT11 Simple File Transfer Service (unstructured); Part 4: AFT12 Positional File Transfer Service (flat); Part 5: AFT22 Positional File Access Service (flat); Part 6: AFT3 File Management Service. This second edition cancels and replace

29、s the first edition (ISO/IECISP10607-6:1991), which has been technically revised. Annex A and Annex B form an integral part of this part of ISO/IECISP10607. Annex C and Annex D are for information only.iv blankENISP10607-6:1996 BSI 03-1999 1 Introduction This part of ISO/IECISP10607 is defined withi

30、n the context of Functional Standardization, in accordance with the principles specified by ISO/IECTR10000, “Framework and Taxonomy of International Standardized Profiles”. The context of Functional Standardization is one part of the overall field of Information Technology (IT) standardization activ

31、ities, covering base standards, profiles, and registration mechanisms. A profile defines a combination of base standards that collectively perform a specific well-defined IT function. Profiles standardize the use of options and other variations in the base standards, and provide a basis for the deve

32、lopment of uniform, internationally recognized system tests. One of the most important roles for an ISP is to serve as the basis for the development (by organizations other than ISO and IEC) of internationally recognized tests and test centres. ISPs are produced not simply to legitimize a particular

33、 choice of base standards and options, but to promote real system interoperability. The development and widespread acceptance of tests based on this and other ISPs is crucial to the successful realization of this goal. The text for this part of ISO/IECISP10607 was developed in close co-operation amo

34、ng the FTAM Expert Groups of the three International OSI/OSE Workshops: OSE Implementors Workshop (OIW), the European Workshop for Open Systems (EWOS) and the Asia-Oceania Workshop (AOW). This part of ISO/IECISP10607 is harmonized among these three Workshops and it was finally ratified by the Worksh

35、ops plenary assemblies. 1 Scope 1.1 General This part of ISO/IECISP10607 (AFT3) covers management of files between the filestores of two end systems, using the OSI connection-mode transport service to provide the interconnection. One end system acts in the initiator role and initiates the file manag

36、ement, the other end system acts in the responder role and provides management of the file in the virtual filestore. These role combinations and the interoperability are shown in Table 1. Table 1 Interoperable configurations This part of ISO/IECISP10607 specifies implementations that support file ma

37、nagement, i.e.the ability to a) create and delete a file, and b) read and change the attributes of a file. This part of ISO/IECISP10607 shall be implemented with one or more of ISO/IECISP10607-3, ISO/IECISP10607-4, ISO/IECISP10607-5. Therefore, this part of ISO/IEC ISP10607 specifies only that funct

38、ionality which is additional to the functionality of the related parts. This part of ISO/IECISP10607 specifies how the OSI FTAM application standard shall be used to provide the functions defined above. It does not specify total system capability. In particular, a system may operate this profile and

39、 at the same time engage in other communications. The requirements placed on an implementation in this part of ISO/IECISP10607 are solely those necessary for operation of the protocol specified. This part of ISO/IECISP10607 describes the actions and attributes of the virtual filestore, and the servi

40、ce provided by the file service provider to file service users, together with the necessary communications between the initiator and the responder. 1.2 Position within the taxonomy This part of ISO/IECISP10607 is identified in ISO/IECTR10000-2 as “AFT3 File Management Service”. It may be combined wi

41、th any T-Profiles (see ISO/IECTR10000) specifying the OSI connection-mode transport service. 1.3 Scenario The model used is one of two end systems establishing an association and managing files in the responders virtual filestore as shown in Figure 1. Initiator Responder Sender Receiver Sender Recei

42、ver Initiator Sender x Receiver x Responder Sender x Receiver xENISP10607-6:1996 2 BSI 03-1999 Specifications of this part of ISO/IEC ISP10607 apply on the double lines of Figure 1. The mapping between the virtual filestore and the real filestore together with the local data management system is not

43、 defined in this part of ISO/IEC ISP10607. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this part of ISO/IECISP10607. At the time of publication, the editions indicated were valid. All documents are subject to revis

44、ion, and parties to agreements based on this part of ISO/IECISP10607 are warned against automatically applying any more recent editions of the documents listed below, since the nature of references made by ISPs to such documents is that they may be specific to a particular edition. Members of IEC an

45、d ISO maintain registers of currently valid International Standards and ISPs, and ITU-T maintains published editions of its current Recommendations. Corrigenda to the base standards referenced: SeeAnnex C for a complete list of these documents which are identified in this part of ISO/IECISP10607. IS

46、O 8571-1:1988, Information processing systems Open Systems Interconnection File Transfer, Access and Management Part 1: General introduction. ISO 8571-2:1988, Information processing systems Open Systems Interconnection File Transfer, Access and Management Part 2: Virtual Filestore Definition. ISO 85

47、71-3:1988, Information processing systems Open Systems Interconnection File Transfer, Access and Management Part 3: File Service Definition. ISO 8571-4:1988, Information processing systems Open Systems Interconnection File Transfer, Access and Management Part 4: File Protocol Specification. ISO 8571

48、-4:1988/Amd.4:1992, Information processing systems Open Systems Interconnection File Transfer, Access and Management Part 4: File Protocol Specification Amendment 4. ISO/IEC 8571-5:1990, Information processing systems Open Systems Interconnection File Transfer, Access and Management Part 5: Protocol

49、 Implementation Conformance Statement Proforma. ISO/IEC TR 10000-1:1992, Information technology Framework and taxonomy of International Standardized Profiles Part1:Framework 1) . ISO/IEC TR 10000-2:1994, Information technology Framework and taxonomy of International Standardized Profiles Part 2: Principles and Taxonomy for OSI Profiles 1) . ISO/IEC ISP 10607-1:1995, Information technology International Standardized Profiles AFTnn File Transfer, Ac