BS EN ISP 10607-5-1997 Information technology - International standardized profiles AFTnn - File transfer access and management - AFT22 - Positional file access service (flat) (reg.pdf

《BS EN ISP 10607-5-1997 Information technology - International standardized profiles AFTnn - File transfer access and management - AFT22 - Positional file access service (flat) (reg.pdf》由会员分享，可在线阅读，更多相关《BS EN ISP 10607-5-1997 Information technology - International standardized profiles AFTnn - File transfer access and management - AFT22 - Positional file access service (flat) (reg.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BSENISP 10607-5:1997 Information technology International Standardized Profiles AFTnn FileTransfer,Access and Management Part 5: AFT22Positional File Access Service (flat) (regional variant of ISO/IECISP10607-5:1995) The European Standard ENISP10607-5:1996 has the status of a Britis

2、hStandard ICS35.100.05 BSENISP10607-5:1997 This British Standard, having been prepared under the direction of the DISC Board, was published under the authority of the Standards Board and comes into effect on 15 April 1997 BSI 02-1999 ISBN058026533 1 National foreword This British Standard is the Eng

3、lish language version of EN ISP10607-5:1996. It is derived from ISO/IEC ISP10607-5:1995 with agreed European variations. It supersedes BS EN ISP 10607-5:1994 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/21, Open Systems Interconnection, Data Ma

4、nagement and Open Distributed Processing, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international

5、 and European developments and promulgate them in the UK. A list of organizations represented on this committee is available on request. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalo

6、gue under the section entitled “International Standards Correspondence Index”, or using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their corre

7、ct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, aninsidefrontcover, pages iandii, theENtitlepage, page 2, the ISOtitle page, page ii to iv, pages 1 to 34, aninsideback cover and abac

8、kcover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSENISP10607-5:1997 BSI 02-1999 i Contents Page National foreword I

9、nside front cover Foreword 2 Foreword iii Text of ISO/IEC ISP 10607-5 1iv blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM ENISP10607-5 August 1996 ICS35.100 SupersedesENISP10607-5:1993 Descriptors: See ISO document English version Information technologyInternational StandardizedProfiles AFTnn

10、File Transfer, AccessandManagementPart 5: AFT22 PostionalFileAccess Service (flat) (regional variantofISO/IEC ISP10607-5:1995) Technologies de linformation Profils normaliss internationaux AFTnn Transfert, accs et gestion de fichier - Partie 5: AFT22 Service daccs positionnel au fichier (plat) (vari

11、ante rgionale de lISO/IEC ISP10607-5:1995) InformationstechnikInternationale Profilnormen AFTnnDateibermittlung, Zugriff und VerwaltungTeil 5: AFT22 Datenbermittlung mit Posistionsangabe (flach) (Regionale Version von ISO/IEC ISP 10607-5:1995) This European Standard was approved by CEN on 1996-08-09

12、. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on

13、 application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat

14、has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for St

15、andardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart, 36 B-1050 Brussels 1996 Copyright reserved to CEN members Ref.No.ENISP10607-5:1996EENISP10607-5:1996 BSI 02-1999 2 Foreword The text of the International Standard from Technical Committe

16、e ISO/IEC/JTC 1 “InformationTechnologies” of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) has been taken over as an European Standard by the Technical Board of CEN. This European Standard shall be given the status of a national stan

17、dard, either by publication of an identical text or by endorsement, at the latest by February1997, and conflicting national standards shall be withdrawn at the latest by month of February1997. This European Standard supersedes ENISP10607-5:1993. For the time being this standard exists in the English

18、 version only. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Port

19、ugal, Spain, Sweden, Switzerland and the United Kingdom. ENDORSEMENT NOTICE The text of the International Standard ISO/IEC ISP 10607-5:1991 was approved by CEN as a European Standard with agreed regional variations as given below. Section and line numbers correspond to the equivalent numbers in the

20、international standard. Diagnostic field detail Section A.12.6 Replace A.12.6/7 with: “For values of the “further details” term support of character strings from the ISO 646 IRV (G0, IR 6 including SPACE) and ISO 8859-1 (G0 and G1, IR 6 and IR 100 including SPACE) coded character sets is required.”

21、Coded character set support Section A.13.1.3 Replace A.13.1.3/1 with: “For values of GraphicString support of character strings from the ISO 646 IRV (G0, IR 6 including SPACE) and ISO 8859-1 (G0 and G1, IR 6 and IR100 including SPACE) coded character sets is required. Replace A.13.1.3/2 with: “For v

22、alues of GeneralString support of character strings from the ISO 646 IRV (G0, IR6 including SPACE) and ISO 8859-1 (G0 and G1, IR 6 and IR100 including SPACE) coded character sets and ISO646 (C0) control character set is required.” Coded character set support Section A.13.2.3 Replace A.13.2.3/1 with:

23、 “For values of GraphicString support of character strings from the ISO 646 IRV (G0, IR 6 including SPACE) and ISO 8859-1 (G0 and G1, IR 6 and IR100 including SPACE) coded character sets is required.” Replace A.13.2.3./2 with: “For values of GeneralString support of character strings from the ISO 64

24、6 IRV (G0, IR 6 including SPACE) and ISO 8859-1 (G0 and G1, IR 6 and IR100 including SPACE) coded character sets and ISO 646 (C0) control character set is required.”ENISP10607-5:1996 ii Contents Page Foreword iii Introduction 1 1 Scope 1 2 Normative references 2 3 Definitions 3 4 Abbreviations 4 5 C

25、onformance 4 6 Virtual filestore 5 7 File protocol 6 Annex A Profile Requirements List for ISO/IECISP10607-5 (AFT22) 9 Annex B Profile object Identifier Inside back cover Annex C Corrigenda Inside back cover Annex D Main difference between the 1stedition(1991) andthe 2nd edition(1995) ofthispart of

26、ISO/IEC ISP10607 Inside back cover Figure 1 File access between two end systems 2 Table 1 Interoperable configurations 1 Table 2 Profile Stack 2 Table 3 string significance, universal classnumber 5 Table 4 string significance, universal classnumber 5 Table 5 Parameter support of NBS-12 6 Table 6 Def

27、ault registration numbers of NBS-12 6 Table 7 Character sets and escape sequencesforNBS-12 6 Table 8 FADU identities for document types 8 Descriptors: Data processing, information interchange, network interconnection, open systems interconnection, data transmission, files, access, management, commun

28、ication procedure, profiles.ENISP10607-5:1996 BSI 02-1999 iii Foreword ISO (the International Organization for Standardization) and IEC (theInternational Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate

29、 in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental or n

30、on-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC1. In addition to developing International Standards, ISO/IEC JTC1 has created a Special Group on Functional Standard

31、ization for the elaboration of International Standardized Profiles. An International Standardized Profile is an Internationally agreed, harmonized document which identifies a standard or group of standards, together with options and parameters, necessary to accomplish a function or set of functions.

32、 Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an International Standardized Profile requires approval by at least75% of the national bodies casting a vote. International Standardized Profile ISO/IECISP10607-5 was prepared with the collaborati

33、on of Asia-Oceania Workshop (AOW); European Workshop for Open Systems (EWOS); Open Systems Environment Implementors Workshop (OIW). ISO/IEC ISP10607 consists of the following parts, under the general title Information technologyInternational Standardized Profiles AFTnnFile Transfer, Access and Manag

34、ement: Part 1: Specification of ACSE, Presentation and Session protocols for the use by FTAM; Part 2: Definition of document types, constraint sets and syntaxes; Part 3: AFT11Simple File Transfer Service (unstructured); Part 4: AFT12Positional File Transfer Service (flat); Part 5: AFT22Positional, F

35、ile Access Service (flat); Part 6: AFT3File Management Service. This second edition cancels and replaces the first edition (ISO/IECISP10607-5:1991), which has been technically revised. It also incorporates amendment1:1994. Annex A and Annex B form an integral part of this part of ISO/IEC ISP10607. A

36、nnex C and Annex D are for information only.iv blankENISP10607-5:1996 BSI 02-1999 1 Introduction This part of ISO/IEC ISP10607 is defined within the context of Functional Standardization, in accordance with the principles specified by ISO/IEC TR10000, “Framework and Taxonomy of International Standar

37、dized Profiles”. The context of Functional Standardization is one part of the overall field of Information Technology (IT) standardization activities, covering base standards, profiles, and registration mechanisms. A profile defines a combination of base standards that collectively perform a specifi

38、c well-defined IT function. Profiles standardize the use of options and other variations in the base standards, and provide a basis for the, development of uniform, internationally recognized system tests. One of the most important roles for an ISP is to serve as the basis for the development (by or

39、ganizations other than ISO and IEC) of internationally recognized tests and test centres. ISPs are produced not simply to legitimize a particular choice of base standards and options, but to promote real system interoperability. The development and widespread acceptance of tests based on this and ot

40、her ISPs is crucial to the successful realization of this goal. The text for this part of ISO/IEC ISP10607 was developed in close co-operation among the FTAM Expert Groups of the three International OSI/OSE Workshops: OSE Implementors Workshop (OIW), the European Workshop for Open Systems (EWOS) and

41、 the Asia-Oceania Workshop (AOW). This part of ISO/IEC ISP10607 is harmonized among these three Workshops and it was finally ratified by the Workshops plenary assemblies. 1 Scope 1.1 General This part of ISO/IEC ISP10607 (AFT22) covers access to files between the filestores of two end systems, using

42、 the OSI connection-mode transport service to provide the interconnection. One end system acts in the initiator role and requests access to the file, the other end system acts in the responder role and provides access to the file in the virtual filestore. These role combinations and the interoperabi

43、lity are shown in Table 1. Table 1 Interoperable configurations Access of files is supported for files with an unstructured, flat or random access constraint set and containing binary or character data. This part of ISO/IEC ISP10607 specifies implementations that support file transfer and file acces

44、s, i.e. the ability to a) read an FADU which is identified by node name, node number or by position (depending on constraint set and document type), b) write (replace and/or extend and/or insert, depending on constraint set and document type) to a file, and c) locate and erase within a file; and opt

45、ionally to a) create and delete a file, and b) read the attributes of a file. Grouping of actions is not mandatory. Therefore, the above file actions can be performed separately and also, multiple file actions can be performed within a given regime. This part of ISO/IEC ISP10607 specifies how the OS

46、I FTAM application standard shall be used to provide the functions defined above. It does not specify total system capability. In particular, a system may operate this profile and at the same time engage in other communications. The requirements placed on an implementation in this part of ISO/IEC IS

47、P10607 are solely those necessary for operation of the protocol specified. This part of ISO/IEC ISP10607 describes the actions and attributes of the virtual filestore, and the service provided by the file service provider to file service users, together with the necessary communications between the

48、initiator and the responder. 1.2 Position within the taxonomy This part of ISO/IEC ISP10607 is identified in ISO/IEC TR10000-2 as “AFT22Positional File Access Service (flat)”. It may be combined with any T-Profiles (seeISO/IEC TR10000) specifying the OSI connection-mode transport service. 1.3 Scenar

49、io The model used is one of two end systems establishing an association and accessing files in the responders virtual filestore as shown in Figure 1. Initiator Responder Sender Receiver Sender Receiver Initiator Sender x Receiver x Responder Sender x Receiver xENISP10607-5:1996 2 BSI 02-1999 Specifications of this part of ISO/IEC ISP10607 apply on the double lines of Figure 1. The mapping between the virtual filestore and the real filestore together with the local data management system i