BS EN ISO 17654-2011 Resistance welding Destructive tests of welds Pressure test of resistance seam welds《电阻焊接 焊接的破坏性检验 电阻滚焊的压力试验》.pdf
《BS EN ISO 17654-2011 Resistance welding Destructive tests of welds Pressure test of resistance seam welds《电阻焊接 焊接的破坏性检验 电阻滚焊的压力试验》.pdf》由会员分享,可在线阅读,更多相关《BS EN ISO 17654-2011 Resistance welding Destructive tests of welds Pressure test of resistance seam welds《电阻焊接 焊接的破坏性检验 电阻滚焊的压力试验》.pdf(12页珍藏版)》请在麦多课文档分享上搜索。
1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 17654:2011Resistance welding Destructive tests of welds Pressure test of resistance seamwelds (ISO 17654:2011)BS EN ISO 17654:2011 BRITISH STANDARDNational forewordThis
2、 British Standard is the UK implementation of EN ISO 17654:2011. It supersedes BS EN ISO 17654:2003 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee WEE/29, Resistance welding.A list of organizations represented on this committee can be obtained on requ
3、est to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 68855 3 ICS 25.160.40 Compliance with a British Standard cannot confer immunity from legal obligations.This British
4、 Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2011.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORMEN ISO 17654 September 2011 ICS 25.160.40 Supersedes EN ISO 17654:2003English Version
5、Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011) Soudage par rsistance - Essais destructifs des soudures -Essai de pression des soudures par rsistance la molette(ISO 17654:2011) Widerstandsschweien - Zerstrende Prfung von Schweiverbindungen -
6、Druckprfung an Widerstandsrollennahtschweiverbindungen (ISO 17654:2011) This European Standard was approved by CEN on 14 September 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national
7、standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version
8、in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
9、 Republic, Denmark, Estonia,Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPE
10、N DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 17654:2011: EBS EN ISO 17654:2011EN ISO 17654:2011 (E) 3Foreword This d
11、ocument (EN ISO 17654:2011) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is held by DIN This European Standard shall be given the status of a national standard, either by publ
12、ication of an identical text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at the latest by March 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC sha
13、ll not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 17654:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bu
14、lgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement noti
15、ce The text of ISO 17654:2011 has been approved by CEN as a EN ISO 17654:2011 without any modification. BS EN ISO 17654:2011g41g82g85g72g90g82g85g71g44g54g50g3g11g87g75g72g3g44g81g87g72g85g81g68g87g76g82g81g68g79g3g50g85g74g68g81g76g93g68g87g76g82g81g3g73g82g85g3g54g87g68g81g71g68g85g71g76g93g68g87g
16、76g82g81g12g3g76g86g3g68g3g90g82g85g79g71g90g76g71g72g3g73g72g71g72g85g68g87g76g82g81g3g82g73g3g81g68g87g76g82g81g68g79g3g86g87g68g81g71g68g85g71g86g3g69g82g71g76g72g86g3g11g44g54g50g3 g80g72g80g69g72g85g3 g69g82g71g76g72g86g12g17g3 g55g75g72g3 g90g82g85g78g3 g82g73g3 g83g85g72g83g68g85g76g81g74g3 g
17、44g81g87g72g85g81g68g87g76g82g81g68g79g3 g54g87g68g81g71g68g85g71g86g3 g76g86g3 g81g82g85g80g68g79g79g92g3 g70g68g85g85g76g72g71g3 g82g88g87g3 g87g75g85g82g88g74g75g3 g44g54g50g3g87g72g70g75g81g76g70g68g79g3g70g82g80g80g76g87g87g72g72g86g17g3g40g68g70g75g3g80g72g80g69g72g85g3g69g82g71g92g3g76g81g87g
18、72g85g72g86g87g72g71g3g76g81g3g68g3g86g88g69g77g72g70g87g3g73g82g85g3g90g75g76g70g75g3g68g3g87g72g70g75g81g76g70g68g79g3g70g82g80g80g76g87g87g72g72g3g75g68g86g3g69g72g72g81g3g72g86g87g68g69g79g76g86g75g72g71g3g75g68g86g3g87g75g72g3g85g76g74g75g87g3g87g82g3g69g72g3g85g72g83g85g72g86g72g81g87g72g71g3g
19、82g81g3g87g75g68g87g3g70g82g80g80g76g87g87g72g72g17g3g44g81g87g72g85g81g68g87g76g82g81g68g79g3g82g85g74g68g81g76g93g68g87g76g82g81g86g15g3g74g82g89g72g85g81g80g72g81g87g68g79g3g68g81g71g3g81g82g81g16g74g82g89g72g85g81g80g72g81g87g68g79g15g3g76g81g3g79g76g68g76g86g82g81g3g90g76g87g75g3g44g54g50g15g3g
20、68g79g86g82g3g87g68g78g72g3g83g68g85g87g3g76g81g3g87g75g72g3g90g82g85g78g17g3g44g54g50g3g70g82g79g79g68g69g82g85g68g87g72g86g3g70g79g82g86g72g79g92g3g90g76g87g75g3g87g75g72g3g44g81g87g72g85g81g68g87g76g82g81g68g79g3g40g79g72g70g87g85g82g87g72g70g75g81g76g70g68g79g3g38g82g80g80g76g86g86g76g82g81g3g11
21、g44g40g38g12g3g82g81g3g68g79g79g3g80g68g87g87g72g85g86g3g82g73g3g72g79g72g70g87g85g82g87g72g70g75g81g76g70g68g79g3g86g87g68g81g71g68g85g71g76g93g68g87g76g82g81g17g44g81g87g72g85g81g68g87g76g82g81g68g79g3g54g87g68g81g71g68g85g71g86g3g68g85g72g3g71g85g68g73g87g72g71g3g76g81g3g68g70g70g82g85g71g68g81g7
22、0g72g3g90g76g87g75g3g87g75g72g3g85g88g79g72g86g3g74g76g89g72g81g3g76g81g3g87g75g72g3g44g54g50g18g44g40g38g3g39g76g85g72g70g87g76g89g72g86g15g3g51g68g85g87g3g21g17g55g75g72g3g80g68g76g81g3g87g68g86g78g3g82g73g3g87g72g70g75g81g76g70g68g79g3g70g82g80g80g76g87g87g72g72g86g3g76g86g3g87g82g3g83g85g72g83g6
23、8g85g72g3g44g81g87g72g85g81g68g87g76g82g81g68g79g3g54g87g68g81g71g68g85g71g86g17g3g39g85g68g73g87g3g44g81g87g72g85g81g68g87g76g82g81g68g79g3g54g87g68g81g71g68g85g71g86g3g68g71g82g83g87g72g71g3g69g92g3g87g75g72g3g87g72g70g75g81g76g70g68g79g3g70g82g80g80g76g87g87g72g72g86g3g68g85g72g3g70g76g85g70g88g7
24、9g68g87g72g71g3g87g82g3g87g75g72g3g80g72g80g69g72g85g3g69g82g71g76g72g86g3g73g82g85g3g89g82g87g76g81g74g17g3g51g88g69g79g76g70g68g87g76g82g81g3g68g86g3g68g81g3g44g81g87g72g85g81g68g87g76g82g81g68g79g3g54g87g68g81g71g68g85g71g3g85g72g84g88g76g85g72g86g3g68g83g83g85g82g89g68g79g3g69g92g3g68g87g3g79g72
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSENISO176542011RESISTANCEWELDINGDESTRUCTIVETESTSOFWELDSPRESSURETESTOFRESISTANCESEAMWELDS 电阻 焊接 破坏性 检验

链接地址:http://www.mydoc123.com/p-581355.html