BS EN ISO 6145-7-2010 Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Thermal mass-flow controllers《气体分析 动态容量法制备校准气体混合物 热式质量流量控制器》.pdf

《BS EN ISO 6145-7-2010 Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Thermal mass-flow controllers《气体分析 动态容量法制备校准气体混合物 热式质量流量控制器》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 6145-7-2010 Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Thermal mass-flow controllers《气体分析 动态容量法制备校准气体混合物 热式质量流量控制器》.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO6145-7:2010ICS 71.040.40NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDGas analysis Preparation ofcalibration gasmixtures usingdynamic volumetricmethodsPart 7: Thermal mass-flow controllersLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/09/20

2、11 02:40, Uncontrolled Copy, (c) BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 30 April2009 BSI 2011ISBN 978 0 580 72205 930 June 2011 This corrigendum renumbers BS ISO 6145-7:2009as BS EN ISO 6145-7:2010BS EN ISO 6145-7:2010National forewor

3、dThis British Standard is the UK implementation of EN ISO 6145-7:2010. It is identical to ISO 6145-7:2009. It supersedes BS ISO 6145-7:2009which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PTI/15, Natural gas and gas analysis.A list of organizations repre

4、sented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Amendments/cor

5、rigenda issued since publicationDate Comments Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/09/2011 02:40, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 6145-7 December 2010 ICS 71.040.40 English Version Gas analysis - Preparation of calibration gas m

6、ixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009) Analyse des gaz - Prparation des mlanges de gaz pour talonnage laide de mthodes volumtriques dynamiques - Partie 7: Rgulateurs thermiques de dbit massique (ISO 6145-7:2009) Gasanalyse - Herstellung von

7、 Kalibriergasgemischen mit Hilfe von dynamisch-volumetrischen Verfahren - Teil 7: Thermische Massendurchflussregler (ISO 6145-7:2009) This European Standard was approved by CEN on 11 December 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditio

8、ns for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in

9、 three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standard

10、s bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and Unit

11、ed Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 6145-7:2

12、010: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/09/2011 02:40, Uncontrolled Copy, (c) BSIForeword The text of ISO 6145-7:2009 has been prepared by Technical Committee ISO/TC 158 “Analysis of gases” of the International Organization for Standardization (ISO) and has been taken over as

13、 EN ISO 6145-7:2010. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at the latest by June 2011. Attention is drawn to the possibil

14、ity that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are b

15、ound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain

16、, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 6145-7:2009 has been approved by CEN as a EN ISO 6145-7:2010 without any modification. BS EN ISO 6145-7:2010EN ISO 6145-7:2010 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/09/2011 02:40, Uncontrolled Cop

17、y, (c) BSIiiiContents Page Foreword iv 1 Scope . 1 2 Normative references . 1 3 Terms and definitions. 1 4 Principle. 2 5 Set-up. 2 5.1 General. 2 5.2 Thermal mass-flow controller using a constant current supply 2 5.3 Thermal mass-flow controller under constant temperature control . 3 6 Preparation

18、of gas mixtures 4 6.1 Description of the experimental procedure .4 6.2 Area of validity 6 6.3 Operating conditions 6 7 Calculations. 7 7.1 Volume fraction. 7 7.2 Sources of uncertainty. 7 7.3 Uncertainty of measurement . 8 Annex A (informative) Pre-mixed gases for preparation of mixtures of high dil

19、ution 9 Annex B (informative) Practical hints. 10 Annex C (informative) Calculation of uncertainties 12 Bibliography . 15 ISO 2011BS EN ISO 6145-7:2010EN ISO 6145-7:2010 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/09/2011 02:40, Uncontrolled Copy, (c) BSIiv Foreword ISO (the Interna

20、tional Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has be

21、en established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical stan

22、dardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies fo

23、r voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or al

24、l such patent rights. ISO 6145-7 was prepared by Technical Committee ISO/TC 158, Analysis of gases. This second edition cancels and replaces the first edition (ISO 6145-7:2001). In preparation of the first edition, it was assumed that each thermal mass-flow controller (TMC) would be configured for u

25、se at its optimum performance, and the uncertainty in the method was estimated on that basis. In this edition, therefore, extra precautionary text has been added to make it clear that the method shall not be employed, for example, to make a 10:1 binary mixture by using two thermal mass-flow controll

26、ers of identical range with one operated at its maximum, say, of 1 000 ml/min and the other at 100 ml/min. In the first edition, this necessary provision was only stated briefly in an informative annex; it has now been expanded and stated more explicitly in a normative part. Another major update is

27、separation of the original Clause 3 into two clauses, one of which (Clause 4) defines the principle while the other (Clause 5) presents additional explanation to the user. The latter of these clauses now includes the necessary requirements. By introducing two new and relevant bibliographic reference

28、s, the understanding of Annex B has been improved. Finally, some typing errors have been corrected. ISO 6145 consists of the following parts, under the general title Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods: Part 1: Methods of calibration Part 2: Volumetr

29、ic pumps Part 4: Continuous syringe injection method Part 5: Capillary calibration devices Part 6: Critical orifices Part 7: Thermal mass-flow controllers Part 8: Diffusion method Part 9: Saturation method Part 10: Permeation method Part 11: Electrochemical generation ISO 6145-3, entitled Periodic i

30、njections into a flowing gas stream, has been withdrawn. ISO 2011BS EN ISO 6145-7:2010EN ISO 6145-7:2010 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/09/2011 02:40, Uncontrolled Copy, (c) BSIBS EN ISO 6145-7:2010INTERNATIONAL STANDARD 1Gas analysis Preparation of calibration gas mixt

31、ures using dynamic volumetric methods Part 7: Thermal mass-flow controllers 1 Scope This part of ISO 6145 is one of a series of International Standards dealing with dynamic volumetric methods used for the preparation of calibration gas mixtures. This part specifies a method for continuous production

32、 of calibration gas mixtures, containing two or more components, from pure gases or other gas mixtures by use of commercially available thermal mass-flow controllers. If this method is employed for the preparation of calibration gas mixtures, the optimum performance is as follows: the relative expan

33、ded uncertainty of measurement, U, obtained by multiplying the combined standard uncertainty by a coverage factor k = 2, is not greater than 2 %. If pre-mixed gases are used instead of pure gases, mole fractions below 106can be obtained. The measurement of mass flow is not absolute and the flow cont

34、roller requires independent calibration. The merits of the method are that a large quantity of the gas mixture can be prepared on a continuous basis and that multicomponent mixtures can be prepared as readily as binary mixtures if the appropriate number of thermal mass-flow controllers is utilized.

35、NOTE Gas-blending systems based upon thermal mass-flow controllers, some including the facility of computerization and automatic control, are commercially available. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references

36、, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 6143, Gas analysis Comparison methods for determining and checking the composition of calibration gas mixtures ISO 6145-1:2003, Gas analysis Preparation of

37、calibration gas mixtures using dynamic volumetric methods Part 1: Methods of calibration ISO 7504, Gas analysis Vocabulary 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 7504 apply. ISO 2011EN ISO 6145-7:2010 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE

38、 CHINA STANDARDS, 09/09/2011 02:40, Uncontrolled Copy, (c) BSI2 4 Principle Continuous production of calibration gas mixtures, containing two or more components, from pure gases or other gas mixtures by the use of commercially available thermal mass-flow controllers is described. By adjusting the se

39、t-points on the flow controllers to pre-determined values, it is possible to change the composition of the gas mixture rapidly and in a continuously variable manner. By selecting appropriate combinations of thermal mass-flow controllers and with the use of pure gases, the volume fraction of the comp

40、onent of interest in the complementary gas can be varied by a factor of 1 000. 5 Set-up 5.1 General To prepare the gas mixture, each gaseous component is passed at a known, controlled flow rate, and at constant pressure, from a calibrated thermal mass-flow controller. Use accurate flowmeters in meas

41、uring the relevant flows in order to reach an acceptable measure of uncertainty regardless of the setting of the mass-flow controller (see also ISO 6145-1:2003, Table 1). A thermal mass-flow controller consists of a measuring unit for mass flow and a proportioning valve which is controlled by an ele

42、ctronic unit (see also References 1 and 2). 5.2 Thermal mass-flow controller using a constant current supply The flowing gas is passed through a heater connected to a constant current supply and the temperature is sensed upstream and downstream from the heater. Figure 1 shows the principle of a ther

43、mal mass-flow controller: heater, temperature sensors and associated circuitry. The two temperature sensors, one upstream and one downstream from the heater form two arms of a Wheatstone bridge circuit, which is balanced to give a zero reading when there is no gas flow. When there is a gas flow thro

44、ugh the system, a temperature difference, T, is established between the two sensors such that the heat flux, , is given by: pm cTq= (1) where cpis the heat capacity per unit mass, or molar heat capacity, of the gas at constant pressure; qmis the mass flow rate. ISO 2011BS EN ISO 6145-7:2010EN ISO 61

45、45-7:2010 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/09/2011 02:40, Uncontrolled Copy, (c) BSI3Key 1 temperature sensor 1 2 temperature sensor 2 3 heater 4 gas supply 5 current supply 6 Wheatstone bridge 7 differential amplifier 8 signal readout Figure 1 Principle of a thermal mass

46、-flow controller with constant current supply The difference in temperature between sensors results in a potential difference across the Wheatstone bridge circuit and thus a signal. The signal is compared with an adjustable reference voltage in a differential amplifier. The resulting output signal i

47、s in turn used for operating a control valve to regulate the flow of gas. 5.3 Thermal mass-flow controller under constant temperature control In this system (see Figure 2), the gas passes through three heaters in sequence, each of which is connected to an arm of a self-regulating Wheatstone bridge.

48、Instead of the difference in temperature being measured, the input to each heater is such that the temperature distribution along the flow path is maintained uniform. The Wheatstone bridge current is proportional to the heat loss and therefore proportional also to the mass flow of the gas. The outpu

49、t signal is again used to operate a solenoid valve to control the mass flow rate. ISO 2011BS EN ISO 6145-7:2010EN ISO 6145-7:2010 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/09/2011 02:40, Uncontrolled Copy, (c) BSIBS EN ISO 6145-7:20104 Key 1 heater 1 2 heater 2 3 heater 3 4 gas supply 5 current supply 6 Wheatstone bridge 7 differential amplifier 8 signal readout Figure 2 Thermal mass-flow controller under constant temperature control In the preparation of multicomponent mixtures, it is in general