BS EN ISO 2400-2012 Non-destructive testing Ultrasonic testing Specification for calibration block No 1《无损检测 超声波检测 1号校准块规范》.pdf
《BS EN ISO 2400-2012 Non-destructive testing Ultrasonic testing Specification for calibration block No 1《无损检测 超声波检测 1号校准块规范》.pdf》由会员分享,可在线阅读,更多相关《BS EN ISO 2400-2012 Non-destructive testing Ultrasonic testing Specification for calibration block No 1《无损检测 超声波检测 1号校准块规范》.pdf(14页珍藏版)》请在麦多课文档分享上搜索。
1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationNon-destructive testing Ultrasonic testing Specification for calibration block No. 1BS EN ISO 2400:2012National forewordThis British Standard is the UK implementation of EN ISO 2
2、400:2012. It super-sedes BS EN 12223:2000 which is withdrawn.The UK participation in its preparation was entrusted to Technical CommitteeWEE/46, Non-destructive testing.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport
3、to include all the necessary provisions of acontract. Users are responsible for its correct application. The British Standards Institution 2012Published by BSI Standards Limited 2012ISBN 978 0 580 74127 2ICS 19.100Compliance with a British Standard cannot confer immunity fromlegal obligations.This B
4、ritish Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 October 2012.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN ISO 2400:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 2400 September 2012 ICS 25.160.
5、40 Supersedes EN 12223:1999English Version Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012) Essais non destructifs - Contrle par ultrasons - Spcifications relatives au bloc dtalonnage n 1 (ISO 2400:2012) Zerstrungsfreie Prfung - Ultraschallprfu
6、ng - Beschreibung des Kalibrierkrpers Nr 1 (ISO 2400:2012) This European Standard was approved by CEN on 14 September 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard wit
7、hout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other
8、 language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, D
9、enmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMIT
10、TEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 2400:2012: EBS EN ISO 2400:2012EN I
11、SO 2400:2012 (E) 2 Contents Page Foreword 3g3BS EN ISO 2400:2012EN ISO 2400:2012 (E) 3 Foreword This document (EN ISO 2400:2012) has been prepared by Technical Committee CEN/TC 138 “Non-destructive testing”, the secretariat of which is held by AFNOR, in collaboration with Technical Committee ISO/TC
12、135 “Non-destructive testing“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by mars 2013, and conflicting national standards shall be withdrawn at the latest by mars 2013. Attention is drawn to th
13、e possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12223:1999. According to the CEN/CENELEC Internal Regulations, the national standa
14、rds organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lux
15、embourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN ISO 2400:2012g49g82g81g16g71g72g86g87g85g88g70g87g76g89g72g3g87g72g86g87g76g81g74g3g178g3g56g79g87g85g68g86g82g81g76g70g3g87g72g86g87g76g81g74g3g178g3g
16、54g83g72g70g76g191g70g68g87g76g82g81g3g73g82g85g3g70g68g79g76g69g85g68g87g76g82g81g3g69g79g82g70g78g3g49g82g17g3g20g20g3 g54g70g82g83g72g55g75g76g86g3g44g81g87g72g85g81g68g87g76g82g81g68g79g3g54g87g68g81g71g68g85g71g3g86g83g72g70g76g191g72g86g3g85g72g84g88g76g85g72g80g72g81g87g86g3g73g82g85g3g87g75g
17、72g3g71g76g80g72g81g86g76g82g81g86g15g3g80g68g87g72g85g76g68g79g3g68g81g71g3g80g68g81g88g73g68g70g87g88g85g72g3g82g73g3g68g3g86g87g72g72g79g3g69g79g82g70g78g3g73g82g85g3g70g68g79g76g69g85g68g87g76g81g74g3g88g79g87g85g68g86g82g81g76g70g3g87g72g86g87g3g72g84g88g76g83g80g72g81g87g3g88g86g72g71g3g76g81g
18、3g80g68g81g88g68g79g3g87g72g86g87g76g81g74g17g21g3 g49g82g85g80g68g87g76g89g72g3g85g72g73g72g85g72g81g70g72g86g55g75g72g3 g73g82g79g79g82g90g76g81g74g3 g85g72g73g72g85g72g81g70g72g71g3 g71g82g70g88g80g72g81g87g86g3 g68g85g72g3 g76g81g71g76g86g83g72g81g86g68g69g79g72g3 g73g82g85g3 g87g75g72g3 g68g83g
19、83g79g76g70g68g87g76g82g81g3 g82g73g3 g87g75g76g86g3 g71g82g70g88g80g72g81g87g17g3 g41g82g85g3 g71g68g87g72g71g3g85g72g73g72g85g72g81g70g72g86g15g3g82g81g79g92g3g87g75g72g3g72g71g76g87g76g82g81g3g70g76g87g72g71g3g68g83g83g79g76g72g86g17g3g41g82g85g3g88g81g71g68g87g72g71g3g85g72g73g72g85g72g81g70g72g
20、86g15g3g87g75g72g3g79g68g87g72g86g87g3g72g71g76g87g76g82g81g3g82g73g3g87g75g72g3g85g72g73g72g85g72g81g70g72g71g3g71g82g70g88g80g72g81g87g3g11g76g81g70g79g88g71g76g81g74g3g68g81g92g3g68g80g72g81g71g80g72g81g87g86g12g3g68g83g83g79g76g72g86g17g44g54g50g3g24g24g26g26g15g3Non-destructive testing Ultrason
21、ic inspection Vocabularyg40g49g3g20g22g22g19g16g23g15g3Non-destructive testing Terminology Part 4: Terms used in ultrasonic testingg40g49g3g20g19g19g21g24g16g21g15g3Hot rolled products of structural steels Part 2: Technical delivery conditions for non-alloy structural steelsg22g3 g55g72g85g80g86g3g6
22、8g81g71g3g71g72g191g81g76g87g76g82g81g86g41g82g85g3g87g75g72g3g83g88g85g83g82g86g72g86g3g82g73g3g87g75g76g86g3g71g82g70g88g80g72g81g87g15g3g87g75g72g3g87g72g85g80g86g3g68g81g71g3g71g72g191g81g76g87g76g82g81g86g3g74g76g89g72g81g3g76g81g3g44g54g50g3g24g24g26g26g3g68g81g71g3g40g49g3g20g22g22g19g16g23g3
23、g68g83g83g79g92g17g23g3 g48g68g81g88g73g68g70g87g88g85g72g23g17g20g3 g54g87g72g72g79g37g79g82g70g78g86g3g86g75g68g79g79g3g69g72g3g80g68g81g88g73g68g70g87g88g85g72g71g3g73g85g82g80g3g86g87g72g72g79g3g74g85g68g71g72g3g54g22g24g24g45g19g15g3g86g83g72g70g76g191g72g71g3g76g81g3g40g49g3g20g19g19g21g24g16g
24、21g15g3g82g85g3g73g85g82g80g3g86g87g72g72g79g3g82g73g3g68g81g3g72g84g88g76g89g68g79g72g81g87g3g74g85g68g71g72g17g23g17g21g3 g39g76g80g72g81g86g76g82g81g86g55g75g72g3g71g76g80g72g81g86g76g82g81g86g3g82g73g3g70g68g79g76g69g85g68g87g76g82g81g3g69g79g82g70g78g3g49g82g17g3g20g3g86g75g68g79g79g3g69g72g3g6
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSENISO24002012NONDESTRUCTIVETESTINGULTRASONICTESTINGSPECIFICATIONFORCALIBRATIONBLOCKNO1 无损 检测 超声波 校准

链接地址:http://www.mydoc123.com/p-579038.html