BS EN ISO 1043-3-2016 Plastics Symbols and abbreviated terms Plasticizers《塑料 符号和缩略语 增塑剂》.pdf

《BS EN ISO 1043-3-2016 Plastics Symbols and abbreviated terms Plasticizers《塑料 符号和缩略语 增塑剂》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 1043-3-2016 Plastics Symbols and abbreviated terms Plasticizers《塑料 符号和缩略语 增塑剂》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO 1043-3:2016Plastics Symbols and abbreviated termsPart 3: Plasticizers (ISO 1043-3:2016)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 1043-3:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 1043-3:201

2、6. It supersedes BS EN ISO 1043-3:1999 which iswithdrawn.The UK participation in its preparation was entrusted to Technical Committee PRI/10, Terminology for rubbers and plastics.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does n

3、ot purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 85156 8 ICS 01.040.83; 83.040.30 Compliance with a British Standard cannot confer immunity

4、 from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 1043-3 November 2016 I

5、CS 83.040.30; 83.080.01 Supersedes EN ISO 1043-3:1999English Version Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:2016) Plastiques - Symboles et termes abrgs - Partie 3: Plastifiants (ISO 1043-3:2016) Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 3: Weichmacher (

6、ISO 1043-3:2016) This European Standard was approved by CEN on 19 September 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and

7、bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the re

8、sponsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav

9、Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NO

10、RMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1043-3:2016 EBS EN ISO 1043-3:2016EN ISO 1043-3:2016 (E) 3 Europea

11、n foreword This document (EN ISO 1043-3:2016) has been prepared by Technical Committee ISO/TC 61 “Plastics” in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publ

12、ication of an identical text or by endorsement, at the latest by May 2017, and conflicting national standards shall be withdrawn at the latest by May 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall n

13、ot be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 1043-3:1999. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulga

14、ria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tur

15、key and the United Kingdom. Endorsement notice The text of ISO 1043-3:2016 has been approved by CEN as EN ISO 1043-3:2016 without any modification. BS EN ISO 1043-3:2016ISO 1043-3:2016(E)Foreword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Use of the symbols and abbreviated ter

16、ms . 15 Schedule of terms 2Annex A (normative) List of symbols for individual components of abbreviated terms . 6 ISO 2016 All rights reserved iiiContents PageBS EN ISO 1043-3:2016ISO 1043-3:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national

17、 standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Internationa

18、l organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended fo

19、r its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.or

20、g/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be

21、in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions r

22、elated to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.The committee responsible for this document is ISO/TC 61, Plastics, Subcommittee

23、 SC 1, Terminology.This third edition cancels and replaces the second edition (ISO 1043-3:1996), which has been technically revised with the following changes: alternative CAS Registry Numbers have been added for some “octyl” plasticizers; a symbol for soya bean has been included in Annex A.ISO 1043

24、 consists of the following parts, under the general title Plastics Symbols and abbreviated terms: Part 1: Basic polymers and their special characteristics Part 2: Fillers and reinforcing materials Part 3: Plasticizers Part 4: Flame retardantsiv ISO 2016 All rights reservedBS EN ISO 1043-3:2016INTERN

25、ATIONAL STANDARD ISO 1043-3:2016(E)Plastics Symbols and abbreviated terms Part 3: Plasticizers1 ScopeThis part of ISO 1043 provides uniform symbols for components of terms relating to plasticizers to form abbreviated terms. It includes, in general, only those abbreviated terms that have come into es

26、tablished use.The purpose of this part of ISO 1043 is to prevent the occurrence of more than one abbreviated term for a given plasticizer. The symbols are primarily intended to be convenient shorthand for forming abbreviated terms for chemical names in publications and other written matter.2 Normati

27、ve referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) app

28、lies.ISO 472, Plastics VocabularyISO 1043-1, Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 472 and ISO 1043-1 apply.4 Use of the symbols and abbreviated t

29、erms4.1 The first appearance of an abbreviated term in a text shall be enclosed in parentheses and shall be preceded by the chemical name written in full.4.2 Only capital letters shall be used for the symbols.4.3 The list comprises the abbreviated term, the commonly used name or names and the Intern

30、ational Union of Pure and Applied Chemistry (IUPAC) equivalent and the Chemical Abstracts Service Registry Number (CAS-RN) where these are available. In cases where IUPAC nomenclature or the CAS-RN is not available due to uncertainty or ambiguity, this is indicated in the text.The commonly used chem

31、ical name or the IUPAC name given in this part of ISO 1043 shall be referred to when defining each abbreviated term.It should be recognized that, in use in the rubber and plastics industries, many plasticizers are “commercial” or “technical” grades and not necessarily pure forms of substances.4.4 A

32、list of symbols for individual components of abbreviated terms is given in Annex A. ISO 2016 All rights reserved 1BS EN ISO 1043-3:2016ISO 1043-3:2016(E)4.5 Mixtures of plasticizers are not considered in this part of ISO 1043.4.6 Unless otherwise indicated, the alkyl groups are n-alkyl groups and ph

33、thalates are esters of o-phthalic acid.4.7 No symbol is used in the abbreviated terms to indicate normal (n-) linear alcohols. For branched (iso) alcohols, the additional symbol I is used, with one exception: in view of worldwide usage of the symbol O for 2-ethylhexyl (for example, in DOA and DOP),

34、this practice is observed in this part of ISO 1043 and the n-octyl group is designated NO (as in DNOP). Because of this dual usage, the application of the rule specified in 4.1 is most important.4.8 The symbol I designates iso-branched groups (for example, DIOP). However, DTDP is sometimes used inst

35、ead of DITDP because di-n-tridecyl phthalate is not used as a plasticizer; when DTDP is used, the application of the rule specified in 4.1 is most important.4.9 For plasticizers based on di-esters of the same alcohol, the first symbol of the abbreviated term is D.4.10 The letter P may be used in pla

36、ce of F for “phosphate” in abbreviated terms for plasticizers.4.11 Several plasticizers having “iso” names indicating branched groups might consist of several isomers. For this reason, no single IUPAC name can describe the detailed chemical composition of each of these plasticizers.4.12 Some plastic

37、izers consisting of esters of more than one alcohol are known by a combined number and letter code, e.g. 711A is an alternative common name for heptyl nonyl undecyl adipate (HNUA). The first digit represents the number of carbon atoms in the shortest alkyl group and the second and third digits repre

38、sent that of the longest alkyl group in the plasticizer; thus 7 denotes heptyl and 11 denotes undecyl. The letter at the end of the code is either A, which denotes adipate, or P, which denotes phthalate.5 Schedule of termsAbbreviated term Common name IUPAC equivalent CAS-RNASE alkyl sulfonic acid es

39、ter alkanesulfonates or alkyl alkanesulfonatesnot knownATBC (or TBAC)tributyl o-acetylcitrate (or acetyl tributylcitrate)tributyl o-acetylcitrate 77-90-7ATEC (or TEAC)triethyl o-acetylcitrate (or acetyl triethyl citrate)triethyl o-acetylcitrate 77-89-4ATEHC actyltri-(2-ethylhexyl) citrate tris(2-eth

40、ylhexyl) 2-actyloxypropane-1,2,3- tricarboxylate144-15-0BAR butyl o-acetylricinoleate butyl (R)-12-acetoxyoleate 140-04-5BBP benzyl butyl phthalate same 85-68-7BCHP butyl cyclohexyl phthalate same 84-64-0BNP butyl nonyl phthalate same not knownBOA benzyl octyl adipate benzyl 2-ethylhexyl adipate 308

41、9-55-2BOP butyl octyl phthalate butyl 2-ethylhexyl phthalate 85-69-8BST butyl stearate same 123-95-5DBA dibutyl adipate same 105-99-7DBEP di-(2-butoxyethyl) phthalate bis(2-butoxyethyl) phthalate 117-83-9aIn this context, “octyl” and “(2-ethylhexyl)” are synonymous. DEHA and DEHP are frequently used

42、 as the abbreviated terms.2 ISO 2016 All rights reservedBS EN ISO 1043-3:2016ISO 1043-3:2016(E)Abbreviated term Common name IUPAC equivalent CAS-RNDBF dibutyl fumarate same 105-75-9DBM dibutyl maleate same 105-76-0DBP dibutyl phthalate same 84-74-2DBS dibutyl sebacate same 109-43-3DBTP dibutyl terep

43、hthalate same 1962-75-0DBZ dibutyl azelate same 2917-73-9DCHP dicyclohexyl phthalate same 84-61-7DCP dicapryl phthalate bis(1-methylheptyl) phthalate 131-15-7DDP didecyl phthalate same 84-77-5DEGDB diethylene glycol dibenzoate oxydiethylene dibenzoate 120-55-8DEP diethyl phthalate same 84-66-2DHP di

44、heptyl phthalate same 3648-21-3DHXP dihexyl phthalate same 84-75-3DIBA diisobutyl adipate same 141-04-8DIBM diisobutyl maleate same 14234-82-3DIBP diisobutyl phthalate same 84-69-5DIDA diisodecyl adipate see 4.11 27178-16-1DIDP diisodecyl phthalate see 4.11 26761-40-0DIHP diisoheptyl phthalate see 4

45、.11 41451-28-9DIHXP diisohexyl phthalate same 71850-09-4DINA diisononyl adipate see 4.11 33703-08-1DINCH diisononyl cyclohexane dicarboxylatediisononyl cyclohexane-1,2- dicarboxylate166412-78-8DINP diisononyl phthalate see 4.11 28553-12-0 68515-48-0DIOA diisooctyl adipate see 4.11 1330-86-5DIOM diis

46、ooctyl maleate see 4.11 1330-76-3DIOP diisooctyl phthalate see 4.11 27554-26-3DIOS diisooctyl sebacate see 4.11 27214-90-0DIOZ diisooctyl azelate see 4.11 26544-17-2DIPP diisopentyl phthalate same 605-50-5DMEP di-(2-methyloxyethyl) phthalate bis(2-methoxyethyl) phthalate 117-82-8DMP dimethyl phthala

47、te same 131-11-3DMS dimethyl sebacate same 106-79-6DNF dinonyl fumarate same 2787-63-5DNM dinonyl maleate same 2787-64-6DNOP di-n-octyl phthalate dioctyl phthalate 117-84-0DNP dinonyl phthalate same 14103-61-8DNS dinonyl sebacate same 4121-16-8DOA dioctylaadipate bis(2-ethylhexyl)aadipate 103-23-1DO

48、IP dioctyl isophthalate bis(2-ethylhexyl) isophthalate 137-89-3DOP dioctyl phthalate bis(2-ethylhexyl) phthalate 117-81-7DOS dioctyl sebacate bis(2-ethylhexyl) sebacate 122-62-3aIn this context, “octyl” and “(2-ethylhexyl)” are synonymous. DEHA and DEHP are frequently used as the abbreviated terms.

49、ISO 2016 All rights reserved 3BS EN ISO 1043-3:2016ISO 1043-3:2016(E)Abbreviated term Common name IUPAC equivalent CAS-RNDOTP (or DEHT)dioctyl terephthalate bis(2-ethylhexyl) terephthalate 6422-86-2DOZ dioctyl azelate bis(2-ethylhexyl) azelate 103-24-2DPCP (or DPCF)diphenyl cresyl phosphate diphenyl x-tolyl orthophosphate, where x denotes o, m, p or mixture26444-49-5DPGDB di-x-propylene glycol dibenzoate not possible 27138-31-4DPHP di-(2-propylheptyl) phthalate bis(2-propylheptyl) benzene-1,2- dicarboxylate53306-54-0DPOP (or DPOF)diphenyl oct