BS EN 62444-2013 Cable glands for electrical installations《电气装置用电缆衬垫》.pdf

《BS EN 62444-2013 Cable glands for electrical installations《电气装置用电缆衬垫》.pdf》由会员分享，可在线阅读，更多相关《BS EN 62444-2013 Cable glands for electrical installations《电气装置用电缆衬垫》.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationCable glands for electrical installationsBS EN 62444:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 62444:2013National forewordThi

2、s British Standard is the UK implementation of EN 62444:2013. It is identical to IEC 62444:2010. It supersedes BS EN 50262:1999 which is withdrawn.The CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of each common modification is indicat

3、ed in the text by .The UK participation in its preparation was entrusted to Technical Committee PEL/213, Cable management.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a c

4、ontract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 82752 5ICS 29.120.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the

5、authority of the Standards Policy and Strategy Committee on 28 February 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDCopyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking

6、permitted without license from IHS-,-,-EUROPEAN STANDARD EN 62444 NORME EUROPENNE EUROPISCHE NORM October 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centr

7、e: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62444:2013 E ICS 29.120.10 English version Cable glands for electrical installations (IEC 62444:2010, modified) Presse-toupes pour install

8、ations lectriques (CEI 62444:2010, modifie) Kabelverschraubungen fr elektrische Installationen (IEC 62444:2010, modifiziert) This European Standard was approved by CENELEC on 2013-09-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for

9、giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in th

10、ree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national ele

11、ctrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, R

12、omania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62444:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 62444:2013 -

13、 2 - Foreword This document (EN 62444:2013) consists of the text of IEC 62444:2010 prepared by IEC/TC 23 “Electrical accessories“, together with the common modifications prepared by CLC/TC 213 “Cable management systems“. The following dates are fixed: latest date by which this document has to be imp

14、lemented at national level by publication of an identical national standard or by endorsement (dop) 2014-09-23 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2016-09-23 This document supersedes EN 50262:1998. EN 62444:2013 includes the following

15、 significant technical changes with respect to EN 50262:1998: - 1 Scope - 3 Terms and definitions - 5 General conditions for tests - 6 Classification - 9 Mechanical properties - 9.5 Resistance to impact - 10.3.2 Electrical current test - 12.2 Resistance to corrosion - Table 2 Pull forces for cable r

16、etention and cable anchorage Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62444:2010 are prefixed “Z”. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be

17、 held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). _ BS EN 62444:2013Copyright British Standards Institution Provided by IHS

18、under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 3 - EN 62444:2013 Endorsement notice The text of the International Standard IEC 62444:2010 was approved by CENELEC as a European Standard with agreed common modifications. B

19、S EN 62444:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 62444:2013 - 4 - Annex ZA (normative) Normative references to international publications with their

20、corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includ

21、ing any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60423 2007 Conduit systems for cable management - Outside diameters of conduits for electrical installa

22、tions and threads for conduits and fittings EN 60423 2007 IEC 60529 + A1 1989 1999 Degrees of protection provided by enclosures (IP Code) EN 60529 + corr. May + A1 1991 1993 2000 IEC 60695-2-11 + corr. January 2000 2001 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire

23、 flammability test method for end-products EN 60695-2-11 2001 ISO 868 2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) EN ISO 868 2003 ISO 4287 1997 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitio

24、ns and surface texture parameters EN ISO 4287 1998 ISO 9227 2006 Corrosion tests in artificial atmospheres - Salt spray tests EN ISO 9227 2006 BS EN 62444:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networkin

25、g permitted without license from IHS-,-,- 2 62444 IEC:2010 CONTENTS 1 Scope.6 2 Normative references .6 3 Terms and definitions .6 4 General requirements.7 5 General conditions for tests8 6 Classification9 6.1 According to material.9 6.2 According to mechanical properties.9 6.3 According to electric

26、al properties 10 6.4 According to resistance to external influences .10 6.5 According to sealing system 10 7 Marking and documentation11 7.1 Marking .11 7.2 Durability and legibility 11 7.3 Documentation 11 8 Construction.12 9 Mechanical properties 12 9.1 General .12 9.2 Cable retention test .13 9.3

27、 Cable anchorage test for non-armoured cable .15 9.4 Cable anchorage test for armoured cable 17 9.5 Resistance to impact .19 9.6 Seal performance 22 10 Electrical properties22 10.1 Equipotential bonding to electrical equipment22 10.2 Equipotential bonding to metallic layer(s) of cable .22 10.3 Prote

28、ctive connection to earth .23 10.3.1 General .23 10.3.2 Electrical current test.23 11 Electromagnetic compatibility .24 12 External influences .25 12.1 Degree of protection in accordance with IEC 60529 (IP Code).25 12.1.1 General .25 12.1.2 Degree of protection against foreign solid objects25 12.1.3

29、 Degree of protection against ingress of water 25 12.2 Resistance to corrosion.25 12.3 Resistance to ultraviolet light.25 13 Fire hazard.26 13.1 Reaction to fire26 13.1.1 General .26 13.1.2 Contribution to fire.26 13.1.3 Spread of fire 26 13.2 Resistance to fire 26 BS EN 62444:2013Copyright British

30、Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-62444 IEC:2010 3 Annex A (normative) Particular requirements for cable glands for electrical installations with NPT entry threads 27 Ann

31、ex B (informative) Test sequence.28 Bibliography29 Figure 1 Typical arrangement for cable retention test.14 Figure 2 Typical arrangement for cable anchorage pull test .16 Figure 3 Typical arrangement for cable anchorage twist test17 Figure 4 Typical arrangement for cable anchorage test for armoured

32、cable18 Figure 5 Typical arrangement for impact test .21 Figure 6 Typical arrangement for electrical current tests 24 Table 1 Clearance holes for cable glands for test purposes .9 Table 2 Pull forces for cable retention and cable anchorage 15 Table 3 Torque value for cable anchorage twist test 17 Ta

33、ble 4 Impact values20 Table 5 Electrical current values 23 Table A.1 Clearance holes for NPT cable glands for test purposes 27 BS EN 62444:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted with

34、out license from IHS-,-,- 6 62444 IEC:2010 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS 1 Scope This Standard provides requirements and tests for the construction and performance of cable glands. This standard covers complete cable glands as supplied by the manufacturer or the supplier responsible for

35、placing the product on the market. This standard does not cover cable glands for mineral insulated cables. This standard covers cable glands with IEC 60423 metric entry threads. NOTE Certain cable glands may also be used “in Hazardous Areas.” Regard should then be taken of other or additional requir

36、ements necessary for the enclosure to be installed in such conditions, for example as specified in the IEC 60079 series. 2 Normative references 3 Terms and definitions For the purposes of this document, the following definitions apply. 3.1 cable gland a device designed to permit the entry of a cable

37、, flexible cable or insulated conductor into an enclosure, and which provides sealing and retention. It may also provide other functions such as earthing, bonding, insulation, cable guarding, strain relief or a combination of these BS EN 62444:2013Text deletedSee Annex ZA.3.2 entry thread the thread

38、ed portion of a cable gland which is intended to be attached to an enclosure or equipment 3.3 cable gland size the nominal diameter of the entry thread 3.4 cable retention the minimum ability of a cable gland to limit the displacement of a fitted cable under static load Copyright British Standards I

39、nstitution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-62444 IEC:2010 7 3.5 cable anchorage the ability of a cable gland to limit the displacement of a fitted cable under dynamic and torque loads 3.6 se

40、ries cable glands of the same classification and design but with different dimensions 3.7 clearance hole unthreaded opening in an enclosure or equipment intended to permit entry of a cable gland 3.8 metallic cable gland cable gland which consists of metallic material only NOTE Sealing systems are ex

41、cluded from this definition. 3.9 non-metallic cable gland cable gland which consists of non-metallic material only NOTE Sealing systems are excluded from this definition. 3.10 composite cable gland cable gland comprising both metallic and non-metallic materials NOTE Sealing systems are excluded from

42、 this definition. 3.11 single-orifice seal seal with one orifice suitable for the passage of a single cable 3.12 multi-orifice seal seal with more than one orifice, each orifice being suitable for the passage of a separate cable 4 General requirements Cable glands shall be designed to provide in nor

43、mal use all the functions declared by the manufacturer or supplier. BS EN 62444:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 8 62444 IEC:2010 5 General condit

44、ions for tests 5.1 Tests according to this standard are type tests. 5.2 Unless otherwise specified, the tests shall be carried out on new cable glands assembled and mounted in accordance with the manufacturers or suppliers instructions, as declared in 7.3. There shall be no adjustment between or dur

45、ing the tests. NOTE Remounting of the sample between tests is not considered to be adjustment. 5.3 Unless otherwise specified, the tests shall be carried out at an ambient temperature of (20 5) C. 5.4 Non-metallic and composite cable glands as well as the sealing systems of metallic cable glands sha

46、ll be pre-conditioned in an oven at (70 2) C and maintained for (168 4) h. If the maximum temperature declared by the manufacturer is greater than 65 C, then the test temperature shall be the declared temperature +5 C. 5.5 Prior to the tests, non-metallic and composite cable glands as well as the se

47、aling systems of metallic cable glands shall be conditioned at a temperature of (20 5) C and a relative humidity between 40 % and 60 % for a minimum of 24 h or longer as specified by the manufacturer. 5.6 Unless otherwise specified, three samples shall be subjected to the relevant tests. In the case

48、 of a series of cable glands, three samples of the largest and smallest and one sample of all other sizes of the same series shall be subjected to the relevant tests. In the case of a cable gland utilising alternative sealing arrangements, each sealing arrangement as specified by the manufacturer or supplier shall be considered as a sample. If a sample does not satisfy a test due to an assembly or manufacturing fault, that test and any preceding one which may have influenced the results of the test