BS EN 61187-1996 Electrical and electronic measuring equipment - Documentation《电气和电子测量设备 文献工作》.pdf

《BS EN 61187-1996 Electrical and electronic measuring equipment - Documentation《电气和电子测量设备 文献工作》.pdf》由会员分享，可在线阅读，更多相关《BS EN 61187-1996 Electrical and electronic measuring equipment - Documentation《电气和电子测量设备 文献工作》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BSEN 61187:1996 Electrical and electronic measuring equipment Documentation The European Standard EN61187:1994 has the status of a British Standard ICS19.080BSEN 61187:1996 This British Standard, having been prepared under the directionof the Electrotechnical Sector Board, was publi

2、shed underthe authority of the Standards Board and comes intoeffect on 15February1996 BSI 03-1999 The following BSI references relate to the work on this standard: Committee reference PEL/85 Draft for comment93/203505 DC ISBN 0 580 23179 8 Committees responsible for this British Standard The prepara

3、tion of this British Standard was entrusted to Technical Committee PEL/85, Measuring equipment for electromagnetic quantities, upon which the following bodies were represented: British Telecommunications plc Department of Trade and Industry (National Physical Laboratory) EEA (The Association of Elec

4、tronics, Telecommunications and Business Equipment Industries) Electricity Association GAMBICA (BEAMA Ltd.) Institution of Electrical Engineers Institution of Incorporated Executive Engineers Ministry of Defence Office of Electricity Regulation (OFFER) Amendments issued since publication Amd. No. Da

5、te CommentsBSEN 61187:1996 BSI 03-1999 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Text of EN 61187 3 List of references Inside back coverBSEN 61187:1996 ii BSI 03-1999 National foreword This British Standard has been prepared by Technical Committee PEL/

6、85 and is the English language version of EN61187:1994 Electrical and electronic equipment Documentation, published by the European Committee for Electrotechnical Standardization (CENELEC). It was derived from IEC1187:1993, published by the International Electrotechnical Commission (IEC). The CENELE

7、C common modification mentioned on page2 has been implemented at the beginning of clause4, as indicated by a side line in the margin. This standard supersedes BS4308:1979, which is withdrawn. Cross-references Publication referred to Corresponding British Standard HD323 BS2011 Environmental testing E

8、N60068 (IEC68) BS EN60068 Environmental testing IEC359 BS4889:1990 Method for specifying the performance of electrical and electronic measuring equipment IEC414 BS5458:1977 Specification for safety requirements for indicating and recording electrical measuring instruments and their accessories IEC41

9、7 BS6217:1981 Guide to graphical symbols for use on electrical equipment EN60617 (IEC617-13) BS EN60617 Graphical symbols for diagrams IEC617 BS3939 Graphical symbols for electrical power, telecommunications and electronics diagrams HD481 BS6667 Electromagnetic compatibility for industrial-process m

10、easurement and control equipment EN60801 (IEC801) BS EN60801 Electromagnetic compatibility for industrial-process measurement and control equipment EN60950 (IEC950) BS EN60950:1992 Specification for safety of information technology equipment, including electrical business equipment EN61010-1 BS EN61

11、010 Safety requirements for electrical equipment for measurement, control and laboratory use Part 1:1993 General requirements EN55011 BS EN55011:1991 Specification for limits and methods of measurement of radio disturbance characteristics of industrial, scientific and medical (ISM) radio-frequency e

12、quipment EN55014:1987 BS800:1988 Specification for limits and methods of measurement of radio interference characteristics of household electrical appliances, portable tools and similar electrical apparatusBSEN 61187:1996 BSI 03-1999 iii A British Standard does not purport to include all the necessa

13、ry provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. ISO216 BS4000 Sizes of paper and board Part 1:1990 Specification of A and B series of trimmed sizes of

14、writing paper and certain classes of printed matter Summary of pages This document comprises a front cover, an inside front cover, pages i to iv, theENtitle page, pages2 to12, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incor

15、porated. This will be indicated in the amendment table on theinside front cover.iv blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN61187 November1994 ICS19.080 Supersedes HD312 S1:1977 Descriptors: Measuring equipment, electrical measurement, electronic measurement, documentation English ve

16、rsion Electrical and electronic measuring equipment Documentation (IEC1187:1993, modified) Equipement de mesures lectriques et lectroniques Documentation (CEI1187:1993, modifie) Elektrische und elektronische Megerte Mitzuliefernde Unterlagen (IEC1187:1993, modifiziert) This European Standard was app

17、roved by CENELEC on1994-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nati

18、onal standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own languag

19、e and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Swit

20、zerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart35, B-1050 Brussels 1994 Copyright reserved to CENELEC members Ref. No. EN6

21、1187:1994EEN61187:1994 BSI 03-1999 2 Foreword The IEC/CENELEC parallel voting procedure, performed for finding out whether or not the International Standard IEC1187:1993 could be accepted without textural changes, has shown that a common modification was necessary for the acceptance as a European St

22、andard. The79th Technical Board of CENELEC decided to submit a common modification to IEC1187:1993, prepared by CENELEC Reporting Secretariat SR85, to the formal vote. The text of the International Standard together with the common modification was approved by CENELEC as EN61187 on1September1994. Th

23、is European Standard replaces HD312 S1:1977. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Contents Page Foreword 2 1 Scope and object 3 2 Normative references 3 3 Definitions 3 4 General requirements 5 4

24、.1 Mandatory documents 5 4.2 Optional documents 5 5 Detailed contents of the operating manual 5 5.1 Introduction 5 5.2 General description 6 5.3 Preparations for use 6 5.4 Operating instructions 7 5.5 Preventive maintenance 7 5.6 Technical specification 7 6 Detailed contents of the service manual 8

25、6.1 Introduction 8 6.2 Safety instructions 8 6.3 Dismantling and reassembling 8 6.4 Performance verification and adjustment 9 6.5 Preventive (routine) maintenance 9 6.6 Repair 9 6.7 List of parts, list of spare parts and replacement of parts 9 6.8 Schematics, flow charts and layout diagrams 10 7 Pre

26、sentation of the manual(s) 10 7.1 Cover and bindings 10 7.2 Pages 10 7.3 Diagrams, charts and tables 10 7.4 Illustrations 10 7.5 Abbreviations 10 7.6 Contents list and index 10 Annex ZA (normative) Other international publications quoted in this standard, with thereferences of the relevant European

27、publications 11 latest date of publication of an identical national standard (dop)1995-07-15 latest date of withdrawal of conflicting national standards (dow)1995-07-15EN61187:1994 BSI 03-1999 3 1 Scope and object This standard applies to the technical documentation to be supplied with electrical an

28、d electronic measuring equipment for use in laboratories. The object of this standard is: to achieve an acceptable level of uniformity, to prevent the use of incorrect expressions, to determine in general terms the basic contents and structure, of the documentation supplied with the equipment in ord

29、er to give the user sufficient information on installation, use, safety, application, technical specification, principle of operation, testing, servicing and lists of options, accessories and replaceable parts. NOTEThis documentation may be contained in one manual or in a set of separate manuals cov

30、ering the various topics. In the latter case, each volume should contain a list of contents of the other volumes. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of pu

31、blication, the editions indicated were valid. All normative documents are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Members of IEC

32、and ISO maintain registers of currently valid International Standards. IEC68, Environmental testing. IEC113, Diagrams, charts, tables. IEC359:1987, Expression of the performance of electrical and electronic measuring equipment. IEC414:1973, Safety requirements for indicating and recording electrical

33、 measuring instruments and their accessories. IEC417:1973, Graphical symbols for use on equipment. Index, survey and compilation of the single sheets. IEC617, Graphical symbols for diagrams. IEC801, Electromagnetic compatibility for industrial-process measurement and control equipment. IEC950:1991,

34、Safety of information technology equipment, including electrical business equipment. IEC1010-1:1990, Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements Amendment1(1992). CISPR11:1990, Limits and methods of measurement of electromagn

35、etic disturbance characteristics of industrial, scientific and medical (ISM) radio-frequency equipment. CISPR14:1985, Limits and methods of measurement of radio interference characteristics of household electrical appliances, portable tools and similar electrical apparatus. ISO216:1975, Writing pape

36、r and certain classes of printed matter Trimmed sizes A and B series. 3 Definitions For the purposes of this International Standard the following definitions apply. Some of these definitions have been taken from the International Electrotechnical Vocabulary (IEV), from IEC359, or from other applicab

37、le IEC standards. 3.1 address a unique code identifying the equipment when it is used in remote control operations 3.2 assembly a number of basic parts or subassemblies, or any combination thereof, joined together to perform a specified function 3.3 adjustments the process of making the equipment co

38、nform to its technical specification 3.4 block diagram a relatively simple diagram to facilitate understanding of the principle of operation. It is a diagram in which the main functional units of the equipment (or part thereof) together with the mutual relationships between them are represented by s

39、ymbols or simple figures without necessarily showing all the connections 3.5 calibration all the operations for the purpose of determining the values of the errors and, if necessary, other metrological properties of a measuring instrument. After calibration and possible adjustment, the residual erro

40、rs can be noted to produce correction values if requiredEN61187:1994 4 BSI 03-1999 3.6 circuit diagram an explanatory diagram intended to facilitate the understanding of the details of the operation of the equipment. It shows by symbols all the components of the equipment (or part(s) of the equipmen

41、t) and all their interconnections, particularly all the electrical connections 3.7 communication protocol a formal statement of the procedures (a set of rules) that are adopted by the interconnected equipment to ensure an orderly and correct transfer of information between the devices 3.8 component

42、location illustration a diagram or photograph in which the elements are displayed in a possibly simplified, but well recognizable form, showing their places in the equipment or subassemblies 3.9 correction table or graph table or graph containing data which provide for corrections on equipment displ

43、ays, taking into account errors found during calibration, but which shall be disregarded when assigning a class index (accuracy) to the equipment 3.10 data bus (instrumentation bus) a set of signal lines used by an interface system to which a number of instruments or parts of an instrument are conne

44、ctable and over which messages can be carried 3.11 preset value (default) the initial settings of the equipment or function, for example, after a “power-on” or a general clear action 3.12 device dependent codes the set of codes, specific to a given equipment, intended for sending and receiving messa

45、ges to and from the outside world 3.13 error codes codes indicating the possible causes of abnormal operation such as malfunctioning of the equipment, programming errors or measuring errors 3.14 flow chart a graphical representation of the definition, analysis, or solution of a problem in which symb

46、ols are used to represent the operation, data flow, sequence of events and decisions related to the operation of the equipment 3.15 functional drawing of moving parts a drawing in which, by means of perspective and/or conventional pictures, symbols, signs and inscriptions, the functioning of the mov

47、ing parts and mechanisms belonging to the equipment is identified and, where necessary, explained 3.16 instruction card a card listing, in condensed form, the operating instructions for manual and, if applicable, remote control 3.17 interface a common boundary between one system and another, or betw

48、een parts of a system, through which information is conveyed 3.18 manual control a method whereby the equipment is set by means of its local (front or rear panel) controls in order to enable it to perform its tasks (also called local control) 3.19 operating manual a technical document, which may be

49、in more than one volume, containing the information necessary for the proper operation and application of the equipment and for a basic understanding of its functions 3.20 options additional features or functions of the equipment which have to be specified or ordered separately 3.21 preventive maintenance routine work carried out on the equipment according to the manufacturers instructions in order to keep it in good working condition 3.22 programmable equipment measuring equipment which performs specified operations on command from the