BS EN 50598-3-2015 Ecodesign for power drive systems motor starters power electronics and their driven applications Quantitative eco design approach through life cycle assessment io.pdf

《BS EN 50598-3-2015 Ecodesign for power drive systems motor starters power electronics and their driven applications Quantitative eco design approach through life cycle assessment io.pdf》由会员分享，可在线阅读，更多相关《BS EN 50598-3-2015 Ecodesign for power drive systems motor starters power electronics and their driven applications Quantitative eco design approach through life cycle assessment io.pdf（52页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 50598-3:2015Ecodesign for power drivesystems, motor starters, powerelectronics and their drivenapplicationsPart 3: Quantitative eco design approachthrough life cycle assessment includingproduct category rules and the content ofenvironmental declarationsBS EN 50598-3:20

2、15 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 50598-3:2015.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/22, Power electronics.A list of organizations represented on this committee can be obtained on request to its secretar

3、y.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 82353 4 ICS 13.020.20; 29.160.30 Compliance with a British Standa

4、rd cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 50598-3

5、 March 2015 ICS 13.020.20; 29.160.30 English Version Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitativeeco design approach through life cycle assessment including product category rules and the content of environmental declaratio

6、ns Ecoconception des entranements lectriques de puissance, des dmarreurs de moteur, de llectronique de puissance et de leurs applications entranes - Partie 3:Approche quantitative dcoconception par lvaluation du cycle de vie, comprenant les rgles relatives aux catgories de produits et le contenu des

7、 dclarations environnementales kodesign fr Antriebssysteme, Motorstarter,Leistungselektronik und deren angetriebene Einrichtungen -Teil 3: Quantitativer kodesign-Ansatz mittels kobilanz einschlielich Produktkategorieregeln und des Inhaltes von Umweltdeklarationen This European Standard was approved

8、by CENELEC on 2015-01-05. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

9、standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own la

10、nguage and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Fra

11、nce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de No

12、rmalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50598-3:2015 E BS EN 50598-3:2015Cont

13、ents Page Foreword.4 Introduction .5 1 Scope 7 2 Normative references 7 3 Terms and definitions 8 4 Description of the elements of ecodesign and environmental declarations of a motor system 14 4.1 General 14 4.2 Environmentally conscious design . 15 4.3 Environmental declaration . 15 5 Basic environ

14、mentally conscious design and declaration requirements 17 5.1 Basic ecodesign requirements . 17 5.2 Basic content of an environmental declaration type II . 17 5.2.1 General . 17 5.2.2 Information about the manufacturer . 17 5.2.3 Description of the product family, the reference product and its packa

15、ging . 17 5.2.4 Constitutive materials and substances . 17 5.2.5 Use phase . 19 5.2.6 End of life 19 6 Full environmentally conscious design and declaration requirements . 20 6.1 Full ecodesign requirements 20 6.2 Content of an environmental declaration type II+ 20 6.2.1 General . 20 6.2.2 Informati

16、on about the manufacturer . 20 6.2.3 Description of the product family, the reference product and its packaging . 20 6.2.4 Constitutive materials and Substances 21 6.2.5 Information on life cycle stages and potential impacts . 21 6.2.6 Other environment-related information (optional) . 25 6.2.7 Refe

17、rences within the environmental declaration . 25 6.3 Verification of the environmentally conscious design and declaration process . 25 7 Basic product category rules (Core PCR) 25 7.1 Objective 25 7.2 General information 25 7.3 Other requirements for an type II+ environmental declaration 26 7.4 Soft

18、ware tool 26 7.5 Product description 26 7.6 Functional unit 26 7.7 Basic cut-off rules . 26 7.8 Product parts 27 7.9 Materials and chemical substances . 27 7.10 System boundaries 27 EN 50598-3:2015 (E)BS EN 50598-3:20157.11 Manufacturing phase 27 7.12 Usage phase 28 7.12.1 General . 28 7.12.2 Applie

19、d usage scenario and duty profile . 28 7.13 End-of-life phase 29 7.14 Allocation rules . 29 7.15 Units . 29 7.16 Calculation rules and requirements for data quality . 30 7.16.1 General requirements . 30 7.16.2 Data quality in the manufacturing phase 30 7.16.3 Data quality in the usage phase . 30 7.1

20、6.4 End-of-life and recycling . 31 Annex A (informative) Environmental aspects in environmentally conscious design . 32 A.1 General . 32 A.2 Scope . 32 A.3 General considerations 32 A.4 Inputs and outputs to be considered 32 Annex B (normative) Scaling functions for deriving potential environmental

21、impacts for full environmental declarations homogeneous product families 36 B.1 General . 36 B.2 Scaling functions for homogeneous product families . 36 Annex C (normative) Further specifications for certain product categories in terms of product specific rules (PSR) 38 C.1 General . 38 C.2 Scope .

22、38 C.3 Further specifications on motor systems components . 38 Annex D (normative) Usage of environmental declaration in the extended product view . 42 D.1 General . 42 D.2 environmental declaration of a driven application 42 Annex E (informative) Template for an environmental declaration 44 E.1 Gen

23、eral . 44 E.2 Basic template 44 Bibliography . 48 EN 50598-3:2015 (E)BS EN 50598-3:2015Foreword This document (EN 50598-3:2015) has been prepared by CLC/TC 22X “Power electronics”. The following dates are fixed: latest date by which this document has to be implemented at national level by publicatio

24、n of an identical national standard or by endorsement (dop) 2016-01-05 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2018-01-05 This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Tr

25、ade Association. CLC/TC 22X/WG 6 as the standardization Task Force dealing with Mandate M/476 from the European Commission for standardization in the field of variable speed drives and/or power drive system products has been setting a close collaboration with several other technical committees (i.e.

26、 CLC/TC 2; CLC/TC 17B) in order to provide a comprehensive standard for energy efficiency and ecodesign requirements. Key points: requirements on how to implement an environmentally conscious design process; requirements for environmental declarations, including product category rules for the underl

27、ying life cycle assessment of PDS; requirements on how to use environmental declarations in the extended product approach. Within CLC/TC 22X/WG 6 a Task Force (TF2) has been set up for dealing with the environmental aspects of ecodesign through harmonized methods of assessing a products environmenta

28、l performance and providing an environmental declaration for components of a motor system. Since currently no horizontal approach on environmental declarations and no underlying life cycle assessment, within the standard basic and motor system specific product category rules, as required by EN ISO 1

29、4025, have been defined. If the approach is standardized for electronic and electro technical equipment through a harmonized standard (e.g. by CLC/TC 111X), the basic category rules (Clause 7) will become obsolete; however, this standard to be issued applies instead. Furthermore, product specific re

30、quirements, e.g. defined in Annex C, still need to be followed. It is the intention of the working group that this document, once finalized as a European standard, is further processed to an international consensus in IEC according to the UAP procedure agreement between CENELEC and IEC. Attention is

31、 drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. EN 50598-3:2015 (E)BS EN 50598-3:2015Introduction Technical Committee CLC/TC 22X has circulated on

32、 2010-03-31 for a short period of time the CLC/TC22X/Sec0100/DC document including Mandate M/476 from the European Commission for standardization in the field of variable speed drives and/or Power Drive System products. As the PDS contains converter driven motors, the additional requirements for mea

33、suring of the energy efficiency of those motors with non-sinusoidal supply and the labelling for the whole PDS are also included. This covers the requirements coming from Mandate M/470. The horizontal ecodesign mandate, M/495, has been accepted at the end of 2011 by CEN and CENELEC, and requires to

34、provide harmonized methods for measuring a products environmental performance with a life cycle assessment and to provide an environmental footprint. The document is based on the CENELEC Technical board document referenced BT137/DG8058/INF also reproducing this EC-Mandate. CLC/TC 22X Working Group 6

35、 as the standardization Task Force dealing with this Mandate has anticipated that a close collaboration with several other technical committees (i.e. CLC/TC 2; CLC/TC 17B) should be set. Therefore CLC/TC 22X Committee has taken its responsibility for this field and has started a standardization work

36、 to clarify all aspects in the field of energy efficiency and ecodesign requirements for Power electronics, Switchgear, Control gear, and Power drive systems and their industrial applications. The sometimes controversial requirements in the field of these tasks are illustrated in Figure 1. The work

37、has been agreed to provide the reasonable target as a best compromise in this field. Figure 1 Illustration of controversial requirements for the Energy related product (ErP) Standardization EN 50598-3:2015 (E)BS EN 50598-3:2015EN 50598 is developed under the CENELEC projects number 24602 to 24604 fo

38、r compliance with requirements from the horizontal mandate M/495. EN 50598 “Ecodesign for power drive systems, motor starters, power electronics Part 2: Energy efficiency indicators for power drive systems and motor starters; Part 3: Quantitative ecodesign approach through life cycle assessment incl

39、uding product category rules and the content of environmental declarations. The parts together will provide the appropriate set of standards also covering the individual mandates M/470, M/476, M/498, M/500 already in reference within Mandate M/495 and the upcoming mandates for standardization of oth

40、er power driven applications. Table 1 Mandates of the European Commission given to CEN, CENELEC and ETSI and how they are solved by the individual parts of the standardization of CLC/TC 22X/WG 6 Mandates Part 1 Part 2 Part 3 M/470 Motors M/476 PDS M/495 Horizontal all future Applications M/488 HVAC

41、comfort fans () M/498 Pumps () M/500 Compressors () NOTE Geared motors (motor plus gearbox) are treated for efficiency classes like a power drive system (converter plus motor). See EN 60034301 for classification of the losses of a geared motor. The efficiency classes of gearboxes as individual compo

42、nents are under consideration. EN 50598-3:2015 (E)BS EN 50598-3:20151 Scope This part of EN 50598 specifies the process and requirements to implement environmentally conscious product design principles, to evaluate ecodesign performance and to communicate potential environmental impacts for power el

43、ectronics (e.g. complete drive modules, CDM), power drive systems and motor starters, all used for motor driven equipment in the power range of 0,12 kW up to 1 000 kW and low voltage (up to 1 000 V) applications over the whole life cycle. It defines the content for 2 different environmental declarat

44、ions based on EN ISO 14021: The basic version - which, in this context, will be referred to as an environmental declaration type II, with basic data and qualitative statements on ecodesign. The full version - which, in this context, will be referred to as an environmental declaration type II+, based

45、 upon a life cycle assessment and including quantitatively evaluated potential environmental impacts. For that the general principles of EN ISO 14025 are taken into account and product category rules PCR for motor system components are included to ensure a harmonized approach. This part of EN 50598

46、is harmonized with the applicable generic and horizontal environmental standards and contains the additional details relevant in this context for the above mentioned products. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are ind

47、ispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE As it is intended by the working group to process this document, once finalized, as an IEC Standard, so

48、me normative references are given even in case if no European harmonized document exists. EN 50598-1, Ecodesign for power drive systems, motor starters, power electronics manufacturing; packaging and distribution; installation and use, maintenance and upgrading and end of life. 3.27 life cycle think

49、ing LCT consideration of all relevant environmental aspects during the entire life cycle of products SOURCE: IEC Guide 109:2003, modified 3.28 material substance or mixture within a product or product part SOURCE: IEC 62674 3.29 motor system motor system is part of the extended product (3.18) as defined in EN 50598-2 and consists of motor starter devices (contactor, soft starters) and/or a complete drive module and motor 3.30 organization group of people and facilities with an arrangement of responsibi